共找到 145 条与 染整机械与器具 相关的标准,共 10 页
本标准规定了织物染色轴的术语、主要尺寸和标记。
Dyeing beams for textile fabrics
本标准规定了用于条子、粗纱和纱线染色用的多孔轴的基本术语和标记,并给出了传动结构的主要尺寸。
Beams for dyeing slivers,roving and yarns
本标准规定了染整机械轧车线压力系列。 本标准适用于纯棉、麻、化纤及其混纺织物染整机械中轧水(液)及轧光轧车。
Linear presures in padders of dyeing and finishing machinery
本标准规定了与染整机械有关的卷绕装置A型和B型方截面轴的尺寸。
Dyeing and finishing machines.Square bars for winding devices.Dimensions
The document specifies the main dimensions and tolerances of cylindrical tubes of perforated tubes for cheese dyeing. Furthermore, directives are given for the characteristics of tubes and for the control of the inner diameter and length of the tube.#,,#
Textile machinery and accessories - Cylindrical tubes - Part 7: Dimensions, tolerances and designation of perforated tubes for cheese dyeing (ISO 3914-7:1994)
この規格は,織物,編み物,不織布などの染色加工に用いる電気式クロスガイダ及び空気圧式クロスがィダ(以下,タロスガィダという。)について規定する。
Cloth guiders for dyeing and finishing
Squeezing rollers, drying cylinders and guide rollers for dyeing and finishing
本标准等效采用国际标准ISO 1036-1984《纺织机械—染整机器左右侧定义》。 本标准规定了纺织机械染整机器的左右侧定义。 本标准适用于在制品具有规定流向的染整机器(包括单元机和联合机)。 对没有固定流向的染整机器(如卷染机等),必要时其各部件的位置可用文字说明或附图。
Definition of left and right sides of dyeing and finishing machine
The document defines the critical widths relating to dyeing and finishing machines to enable the specification, without ambiguity, of these essential dimensions, particularly in orders. The basic width is the nominal width b as defined in 2.3. It also specifies the range of nominal widths for this equipment.#,,#
Textile machinery - Widths relating to dyeing and finishing machines - Definitions and range of nominal widths; identical with ISO 1505:1993
本标准规定了不锈钢导辊式干洗槽的主要参数、技术要求、试验方法、检验规则及标志、包装、运输和贮存。 本标准适用于纯棉、毛、麻、化纤及其混纺织物在染整工艺中用的不锈钢导辊式干洗槽。
Stainless steel guide roller flat washing tank
本标准规定了染整机器公称速度的术语、定义及其系列。 本标准适用于加工棉、麻、毛、丝、化学纤维织物及其混纺织物的各类机械方式输送的染整机械传动装置的速度选择,并有利于使用厂联合机的配置。
Dyeing and finishing machine nominal speed
本标准规定了均匀轨车的主要参数、技术要求、试验方法、检验规则及标志、包装、运输及贮存。 本标准适用于纯棉、化纤及其混纺织物等混轧染料、树脂等工艺介质用之液压辊均匀乾率。
Uniform rolling
This International Standard defines the critical widths relating to dyeing and finishing machines to enable the specification, without ambiguity, of these essen-tial dimensions, particularly in orders. The basic width is the nominal width b as defined in 2.3. It also spec-ifies the range of nominal widths for this equipment.
Textile machinery - Widths relating to dyeing and finishing machines - Definitions and range of nominal widths
This International Standard specifies the dimensions of the square section of bars of types A and B for winding devices relating to dyeing and finishing ma-chines.
Textile machinery - Square bars for winding devices relating to dyeing and finishing machines - Dimensions
Defines 8 critical widths to enable the specification, without ambiguity, of these essential dimensions, particularly in orders, and specifies the range of nominal width, i.e. the width of the machine elements, which house the textile fabric during a treatment process.
Textile machinery; widths relating to dyeing and finishing machines; definitions and range of nominal widths
Specifies the dimensions of the square section of bars of types A and B.
Textile machinery; square bars for winding devices relating to dyeing and finishing machines; dimensions
Guide roller type crossing cloth hot air dryer
Apparatus for testing of colour fastness to perspiration
Specifies the terminology, principal dimensions (for overall diameters from 400 mm to 1 200 mm) and designation of dyeing beams. Figure 1 and 2 illustrate the principal dimensions given in Table 1.
Textile machinery and accessories; beams for winding; part 9: dyeing beams for textile fabrics
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号