Y14 自行车 标准查询与下载
共找到 807 条与 自行车 相关的标准，共 54 页
Cycles -- Classification, terminology and essential characteristics
- ICS
- 43.150
- CCS
- Y14
- 发布
- 2016-01-20
- 实施
Cycles. Pedal axle and crank assembly with square end fitting. Assembly dimensions
- ICS
- 43.150
- CCS
- Y14
- 发布
- 2015-12-31
- 实施
- 2015-12-31
Cycles. Audible warning devices. Technical specification and test methods
- ICS
- 43.150
- CCS
- Y14
- 发布
- 2015-12-31
- 实施
- 2015-12-31
Cycles - Pedal axle and crank assembly with square end fitting - Assembly dimensions
- ICS
- 43.150
- CCS
- Y14
- 发布
- 2015-12
- 实施
This International Standard lays down the technical specifications, such as the sound pressure level and the durability, and specifies the corresponding test method for audible warning devices (AWD) which may be fitted to cycles. This International Standard applies to all types of audible warning devices (AWD) for use on bicycles.
Cycles - Audible warning devices - Technical specification and test methods
- ICS
- 43.150
- CCS
- Y14
- 发布
- 2015-12
- 实施
Wheelchairs - Part 19: Wheeled mobility devices for use as seats in motor vehicles - Amendment 1: Annex G
- ICS
- 11.180.10
- CCS
- Y14
- 发布
- 2015-11
- 实施
本标准规定了自行车的分类、命名和型号编制方法等。 本标准适用于各种类型的自行车。
Cycle.The rule for drawing up the name and model
- ICS
- 43.150
- CCS
- Y14
- 发布
- 2015-10-10
- 实施
- 2016-03-01
Wheelchair seating. Simulated use and determination of the changes in properties of seat cushions
- ICS
- 11.180.10
- CCS
- Y14
- 发布
- 2015-09-30
- 实施
- 2015-09-30
Cycles. Safety requirements for bicycles. Frame and fork test methods
- ICS
- 43.150
- CCS
- Y14
- 发布
- 2015-09-30
- 实施
- 2015-09-30
Cycles. Safety requirements for bicycles. Requirements for city and trekking, young adult, mountain and racing bicycles
- ICS
- 43.150
- CCS
- Y14
- 发布
- 2015-09-30
- 实施
- 2015-09-30
Dieser Teil von ISO 4210 legt sicherheitstechnische und leistungsbezogene Anforderungen an konstruktive Ausführung, Zusammenbau und Prüfung von Fahrrädern und Baugruppen fest, die über eine in Tabelle 1 festgelegte Sattelhöhe verfügen, und stellt Richtlinien für das Benutzerhandbuch des Herstellers hinsichtlich der Benutzung und Pflege dieser Fahrräder bereit. Dieser Teil von ISO 4210 gilt für Jugendfahrräder mit einer maximalen Sattelhöhe von 635 mm oder höher, aber weniger als 750 mm, City- und Trekkingfahrräder, Geländefahrräder und Rennräder, die über eine maximale Sattelhöhe von 635 mm oder höher verfügen, sowie Falträder (siehe Tabelle 1 und Bild 1). Dieser Teil der ISO 4210 gilt nicht für spezialisierte Fahrradtypen wie Lastenfahrräder, Liegefahrräder, Tandems, BMX-Fahrräder und Fahrräder, die für harte Anwendungen wie genehmigte Wettbewerbsveranstaltungen, Trickfahrten oder Kunstsprungfiguren ausgelegt und ausgerüstet sind. ANMERKUNG Bei Fahrrädern mit einer maximalen Sattelhöhe von 435 mm oder weniger siehe ISO 8124-1 und bei einer maximalen Sattelhöhe von mehr als 435 mm und weniger als 635 mm siehe ISO 8098.
Cycles - Safety requirements for bicycles - Part 2: Requirements for city and trekking@ young adult@ mountain and racing bicycles
- ICS
- 43.150
- CCS
- Y14
- 发布
- 2015-09-01
- 实施
Der vorliegende Teil von ISO 4210 legt die Prüfverfahren für Rahmen und Gabeln nach ISO 4210-2 fest.
Cycles - Safety requirements for bicycles - Part 6: Frame and fork test methods (ISO 4210-6:2015)
- ICS
- 43.150
- CCS
- Y14
- 发布
- 2015-09-01
- 实施
This part of ISO 10865 applies to wheelchair passenger spaces that are intended for use by passengers with a body mass greater than 22 kg who remain in their wheelchairs when travelling facing forward in accessible transport vehicles designed to transport both standing and sitting passengers on fixedroute service. It assumes that the maximum acceleration imparted to the vehicle during emergency driving manoeuvres will not exceed 1 g in any direction and rarely exceeds 3 g in frontal crashes. For the purposes of this part of ISO 10865, the term wheelchair includes manual and powered wheelchairs, and three and four wheeled scooters. This part of ISO 10865 specifies performance requirements and associated test methods, design requirements, requirements for manufacturer instructions and warnings to installers, wheelchair users, and vehicle operators, and requirements for product labelling and disclosure of test information. The provisions of this part of ISO 10865 apply primarily to a complete forward-facing wheelchair passenger space (FF-WPS), but subsets of the provisions can be applied to components and subassemblies sold separately, as appropriate to the specific functions of the components and/or subassemblies they are intended to replace.
Wheelchair containment and occupant retention systems for accessible transport vehicles designed for use by both sitting and standing passengers - Part 2: Systems for forward-facing wheelchair-seated passengers
- ICS
- 11.180.10;43.100
- CCS
- Y14
- 发布
- 2015-09
- 实施
This part of ISO 16840 specifies apparatus, test methods, and disclosure requirements for generating aging effects in a seat cushion that reproduce those seen in use. It also provides methods of determining changes in the physical and mechanical properties of seat cushions based on their age and use. This part of ISO 16840 provides a set of tests that simulate wear and tear, which can be useful to validate warranty claims and to provide information about product, life, and performance limitations associated with product use.
Wheelchair seating - Part 6: Simulated use and determination of the changes in properties of seat cushions
- ICS
- 11.180.10
- CCS
- Y14
- 发布
- 2015-09
- 实施
Cycles - Safety requirements for bicycles - Part 2: Requirements for city and trekking, young adult, mountain and racing bicycles
- ICS
- 43.150
- CCS
- Y14
- 发布
- 2015-09
- 实施
Cycles - Safety requirements for bicycles - Part 6: Frame and fork test methods
- ICS
- 43.150
- CCS
- Y14
- 发布
- 2015-09
- 实施
Cycles. Lighting and retro-reflective devices. Lighting systems powered by the cycle’s movement
- ICS
- 43.150
- CCS
- Y14
- 发布
- 2015-06-30
- 实施
- 2015-06-30
Cycles. Lighting and retro-reflective devices. Lighting systems not powered by the cycle’s movement
- ICS
- 43.150
- CCS
- Y14
- 发布
- 2015-06-30
- 实施
- 2015-06-30
