Y22 日用玻璃制品 标准查询与下载

ISO 6414:1982 玻璃器皿的技术制图

The rules and conventions established are intended for particular use with drawings for laboratory glassware or glassware in other technical fields. Optical parts are not included. The figures merely illustrate the text and should not be considered design examples. They are simplified and not to ecale.

Technical drawings for glassware

BS 1918-2:1981 玻璃容器的精加工.第2部分:冠形精加工规范

Dimensions of three types of crown finish for glass bottles.

Glass container finishes - Specification for crown finish

ASTM C927-80(2009) 外表用陶瓷玻璃釉装饰的玻璃酒杯杯口及外缘析出铅和镉的标准试验方法

The heavy metals, lead and cadmium, are known to cause serious health effects in man if consumed in excess. It is, therefore, important to measure the amount that may be extracted from an area of the glass drinking vessel in contact with the lip. Even though the amount of lead and cadmium extracted by this test method is in no way representative of the amount of the metals extracted by actual lip contact, the relative magnitude of metals extracted from one test specimen in relation to another test specimen provides an effective tool for discrimination.1.1 This test method covers the determination of lead and cadmium extracted by acetic acid from the lip and rim area of glassware used for drinking and which is exteriorly decorated with ceramic glass enamels. The procedure of extraction may be expected to accelerate the release of lead and cadmium from the decorated area and to serve, therefore, as a severe test that is unlikely to be matched under the actual conditions of usage of such glassware. This test method is specific for lead and cadmium. Note 18212;For additional information see Test Method C 738. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard may involve hazardous materials, operations, and equipment. This standard does not purport to address all of the safety concerns associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Lead and Cadmium Extracted from the Lip and Rim Area of Glass Tumblers Externally Decorated with Ceramic Glass Enamels

ASTM C927-80(1999) 外表用陶瓷玻璃釉装饰的玻璃酒杯杯口及外缘析出铅和镉的标准试验方法

1.1 This test method covers the determination of lead and cadmium extracted by acetic acid from the lip and rim area of glassware used for drinking and which is exteriorly decorated with ceramic glass enamels. The procedure of extraction may be expected to accelerate the release of lead and cadmium from the decorated area and to serve, therefore, as a severe test that is unlikely to be matched under the actual conditions of usage of such glassware. This test method is specific for lead and cadmium. Note 1-For additional information see Test Method C738. 1.2 The values stated in acceptable metric units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard may involve hazardous materials, operations, and equipment. This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Lead and Cadmium Extracted from the Lip and Rim Area of Glass Tumblers Externally Decorated with Ceramic Glass Enamels

BS 5586-1:1978 感官分析仪器 品酒杯规范

Description; characteristics including physical (material and finish), dimensional; special characteristics for lid, marking, coloured glass and glass with an area for effervescence; instructions for use.

Sensory analysis apparatus. Specification for wine-tasting glass

BS 1918-1:1978 玻璃容器的精加工.第1部分:连续螺纹精加工规范

Glass dimensions for four series of external screw neck finishes and a method of gauging the minimum outside diameter of glass threads.

Glass container finishes - Specification for continuous thread finish

UNI 6791-1971 玻璃啤酒瓶

Esempio e prospetto con designazione. Imboccatura: secondo UNI 5300-63 con foro minimo passante di 14,5 mm. Il colore del vetro deve essere giallo- bruno. Caratteristiche.

Bier bottles.

UNI 6583-1969 玻璃瓶．专业词汇

Figura e prospetto termini in italiano, francese, inglese, tedesco.

Glass bottles. Nomenclature

UNI 6582-1969 玻璃小瓶．专业词汇

Figura e prospetto termini in italiano, francese, inglese, tedesco.

Glass bottles. Nomenclature.

UNI 5882-1966 玻璃瓶开口．小环式开口

Esempio e tabella con designazione. Stabilisce la forma e le dimensioni dell' imboccatura delle bottiglie destinate ad essere chiuse con tappi di sughero o con tappi di altro materiale.

Glass bottle mouths. Flat cork (clamp) mouth.

JIS S 4050:1986 壁挂镜

Hanging mirrors and wall mirrors

QB/T 3561-1999 玻璃杯检测方法

本标准适用于盛装饮料用的玻璃杯。 试样在1℃-5℃的冷水中放置5min取出后立即用沸水冲试。

Glass testing method

QB/T 3572-1999 硼硅酸盐玻璃化学分析方法

本标准适用于以二氧化硅、三氧化二硼、三氧化二铝和氧化钠为主要成分的仪器玻璃及组成与之类似的玻璃的化学分析。本标准中同一成分所列出不同的分析方法，可根据具体情况选用。

Chemical analysis method of borosilicate glass

QB/T 3560-1999 人工吹制玻璃杯

本标准适用于盛装饮料用的人工吹制玻璃杯，不适用于高脚杯、深刻杯。 按容量分为小于142mL、142mL^284mL和大于284mL三类。

hand blown glass

QB/T 3559-1999 机压玻璃杯

本标准适用于盛装饮料的机压玻璃杯。 按容量分为小于142mL, 142mL^284mL和大于284mL三类。

Machine Pressed Glass

QB/T 3558-1999 机吹玻璃杯

本标准适用于盛装饮料用的机吹玻璃杯，不适用于高脚杯、深刻杯。 1.1 按品种分为机吹杯、机吹厚底杯两种。 1.2 按容量分为小于142mL, 142mL~284mL和大于284mL三类。

machine blown glass