Z32 噪声、振动测试方法 标准查询与下载

ISO 11200:2014 声学 机器和设备发射的噪声 工作位置和其他指定位置发射声压级的测量的基本标准的使用导则

This International Standard is the frame standard introducing the basic group, ISO 11201, ISO 11202, stations and other specified positions. It gives guidance for: — facilitating the writing of noise test codes; — providing physical explanations of this noise emission quantity compared to other noise quantities (see 4.1 to 4.3); — comparing the different measurement methods offered by the group (see Table 1); — facilitating the choice of the most appropriate method(s) in typical practical situations (Clause 6). This International Standard is largely based on flow charts and tables. Case studies are described. The guidance given applies to airborne sound only. It is for use in noise testing, in general, and in the preparation of noise test codes, in particular. A standardized noise test code is intended to select standards from the ISO 11201, ISO 11202, ISO 11203, which give detailed requirements on mounting and operating conditions for the particular family, as well as the location of the work station(s) and other specified positions as prescribed in these International Standards. The data so obtained can be used for the declaration and verification of emission sound pressure levels, e.g. as specified in ISO 4871.[3]

Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions

BS ISO 10844:2014 声学.测量道路车辆及其轮胎发射的噪声用的试验车道的规范

Acoustics. Specification of test tracks for measuring noise emitted by road vehicles and their tyres

SAE J1207-2014 测定减少发动机进气或排气声级消声效果的测量程序

This SAE Recommended Practice sets forth the instrumentation, environment, and test procedures to be used in measuring the silencer system effectiveness in reducing intake or exhaust sound level of internal combustion engines. The system shall include the intake or exhaust silencer, related piping, and components. This procedure is intended for engine-dynamometer testing and is not necessarily applicable to vehicle testing (see Appendix A). The effect of the exhaust or intake system on the sound level of the overall machine must be determined using other procedures. This procedure may be successively applied to various silencer configurations to determine r

Measurement Procedure for Determination of Silencer Effectiveness in Reducing Engine Intake Or Exhaust Sound Level

SAE J1074-2014 发动机声级测量规程

This SAE Recommended Practice sets forth the equipment, environment, and test procedures to be used in measuring sound levels of engines. The purpose is to provide a uniform method of measuring the maximum acoustical radiation from the exterior surfaces of an engine under representative engine operating conditions. The measured sound levels will be useful in development of engines, comparison of engines, and installation of engines in various applications. The correlation of the measured engine sound levels to the various application sound levels will have to be developed.

Engine Sound Level Measurement Procedure

ISO 10844:2014 声学.测量道路车辆发出的噪音用试验车道规范

This International Standard specifies the essential characteristics of a test surface intended to be used for measuring vehicle and tyre or road noise emissions. The surface design given in this International Standard — produces consistent levels of tyre or road sound emission under a wide range of operating conditions including those appropriate to vehicle sound testing, — minimizes inter-site variation, — provides minor absorption of the vehicle sound sources, and — is consistent with road-building practice. NOTE For the purposes of this International Standard, the terms noise and sound are used interchangeably.

Acoustics - Specification of test tracks for measuring noise emitted by road vehicles and their tyres

DIN EN ISO 1680:2014 声学.测量旋转式电动机械发出的空中传播的噪音试验规程(ISO 1680-2013).德文版本EN ISO 1680-2013

Acoustics - Test code for the measurement of airborne noise emitted by rotating electrical machines (ISO 1680:2013); German version EN ISO 1680:2013

BS PD CEN/TR 15350:2013 机械振动. 用机器说明, 包括机械供方说明中对手臂振动负荷的评定指南

Mechanical vibration. Guideline for the assessment of exposure to hand-transmitted vibration using available information including that provided by manufacturers of machinery

NF S31-006*NF EN ISO 1680:2014 声学. 测量旋转电机排放的空气噪声的试验规程

La présente Norme internationale spécifie toutes les informations nécessaires à la réalisation efficace et dans les conditions normalisées de la détermination, de la déclaration et de la vérification des caractéristiques d'émission sonore des machines électriques tournantes. Elle spécifie les méthodes de mesure du bruit pouvant être utilisées ainsi que les conditions de fonctionnement et de montage qui doivent être utilisées pour l'essai.

Acoustics - Test code for the measurement of airborne noise emitted by rotating electrical machines

GOST R ISO 10302-1-2014 信息技术和电信设备用小型空气推动装置. 噪声和振动试验代码. 第1部分. 噪声测量

Small air-moving devices for information technology and telecommunication equipment. Noise and vibration test codes. Part 1. Noise measurement

GOST R ISO 28961-2014 声学. 18至25岁听觉正常人群在自由场听力条件下听阈的统计分布

Acoustics. Statistical distribution of hearing thresholds of otologically normal persons in the age range from 18 years to 25 years under free-field listening conditions

GOST ISO 3745-2014 声学. 利用声压测定噪声源的声功率级和声能量级. 消声室和半消声室精密法

Acoustics. Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for anechoic rooms and hemi-anechoic rooms

BS EN ISO 1680:2013 声学.测量旋转式电机发射的空气声的试验规程

Acoustics. Test code for the measurement of airborne noise emitted by rotating electrical machines

JB/T 5314-2013 滚动轴承 振动（加速度）测量方法

本标准规定了滚动轴承(以下简称轴承)振动(加速度)测量方法。本标准适用于具有圆柱孔和圆柱外表面的向心球轴承(单列和双列深沟球轴承、调心球轴承以及单列和双列角接触球轴承)、调心滚子轴承、单列和双列圆锥滚子轴承以及单列和双列圆柱滚子轴承。

Rolling bearings.Measuring methods for vibration (acceleration)

KS V ISO 14509-2:2013 小型船舶.动力油轮排放空气噪声.第2部分:用基准船作噪声评估

이 표준은 길이 24 m 이하의 단일선체를 가지는 동력유람선에서 방출되는 음향에 대하여 부속서A와 부속서 B에 규정된 두 가지 대체 방법 중 어느 한 가지 방법에 따라 최대 음향을 평가하는절차에 대하여 규정한다.이 표준은 선외기 방식과 배기일체형 선미구동 방식에 대한 형식시험에는 적용되지 않는다.

Small craft ― Airborne sound emitted by powered recreational craft–Part 2: Sound assessment using reference craft

NF S31-010/A2:2013 声学.环境噪音的表征和测量.专用测量方法

Acoustics - Environmental noise characterization and measurement - Special measuring methods

ISO 1680:2013 声学. 测量旋转电机排放的空气噪声的试验规程

This International Standard specifies all the information necessary to carry out efficiently and under standardized conditions the determination, declaration, and verification of the noise emission characteristics of rotating electrical machines. It specifies noise measurement methods that can be used, and specifies the operating and mounting conditions required for the test.

Acoustics.Test code for the measurement of airborne noise emitted by rotating electrical machines

BS ISO 1999:2013 声学. 噪声引起的听力损伤评价

Acoustics. Estimation of noise-induced hearing loss

ISO 1999:2013 声学.噪声诱发的听觉损耗估计

This International Standard specifies a method for calculating the expected noise-induced permanent threshold shift in the hearing threshold levels of adult populations due to various levels and durations of noise exposure; it provides the basis for calculating hearing disability according to various formulae when the hearing threshold levels at commonly measured audiometric frequencies, or combinations of such frequencies, exceed a certain value.

Acoustics.Estimation of noise-induced hearing loss

NF S30-292/A1:2013 声学.内河水道上和港口中船舶辐射的空气声测量.修改件1

Acoustics - Measurement of airborne sound emitted by vessels on inland waterways and harbours - Amendment 1

ISO 3095:2013 声学.轨道交通.轨道车辆发出的噪音测量

This International Standard specifies measurement methods and conditions to obtain reproducible and comparable exterior noise emission levels and spectra for all kinds of vehicles operating on rails or other types of fixed track, hereinafter conventionally called "unit".

Acoustics.Railway applications.Measurement of noise emitted by railbound vehicles