Z32 噪声、振动测试方法 标准查询与下载

JIS Z 8732:2021 声学. 用声压测定噪声源的声功率级和声能级. 无回声室和半回声室的精密方法

Acoustics -- Determination of sound power levels and sound energy levels of noise sources using sound pressure -- Precision methods for anechoic rooms and hemi-anechoic rooms

DIN EN ISO 11691:2021 声学. 无流量管道中消音器的插入损耗测量. 实验室鉴定法(ISO 11691-2020); 德文版本EN ISO 11691-2020

The document specifies a method for the simplified determination of the insertion loss of duct silencers intended for use with flows with velocities of 15 m/s or less. It is applicable for silencers with circular cross sections and diameters between 80 mm and 2000 mm and for sile

Acoustics - Measurement of insertion loss of ducted silencers without flow - Laboratory survey method (ISO 11691:2020); German version EN ISO 11691:2020

ISO/TS 11819-3:2021 声学. 测量路面对交通噪声的影响. 第3部分: 标准轮胎

Acoustics - Measurement of the influence of road surfaces on traffic noise - Part 3: Reference tyres

ISO 22868:2021 林业和园艺机械. 带内燃机的便携手持式机械的噪声试验规范. 工程法(2级准确度)

This document specifies a noise test code for determining, efficiently and under standardized conditions, the common noise emission characteristics of portable, hand-held, combustion engine powered forest and garden machines, and specific requirements for chain-saws, brush-cutters, grasstrimmers, edgers, pole-mounted powered pruners, hedge-trimmers and garden blowers/vacuums/ knapsack mist blowers. Noise emission characteristics include the A-weighted emission sound pressure level at the operator position and the A-weighted sound power level. Noise test codes as described in this document enable the manufacturer to verify the effort regarding low noise design.

Forestry and gardening machinery - Noise test code for portable hand-held machines with internal combustion engine - Engineering method (Grade 2 accuracy)

NF S31-704-2-1*NF EN IEC 60704-2-1:2020 家用和类似电器设备. 气载噪声测定的试验规程. 第2-1部分: 干式真空吸尘器的特殊要求

Le présent document s'applique pour la détermination du bruit aérien des aspirateurs à sec qui fonctionnent sur secteur et des aspirateurs à sec sans cordon destinés à un usage domestique ou dans des conditions analogues à celles des foyers domestiques.Le présent document doit êt

Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-1 : particular requirements for dry vacuum cleaners

BS EN ISO 11691:2020 声学. 无气流管道消声器插入损失的测量. 实验室测量法

Acoustics. Measurement of insertion loss of ducted silencers without flow. Laboratory survey method

ISO 2922:2020 声学. 内河水道上和港口中的船舶辐射的空气声的测量

This document specifies the conditions for obtaining reproducible and comparable measurement results of the airborne sound emitted by vessels of all kinds, on inland waterways and in ports and harbours, except powered recreational craft as specified in the ISO 14509 series. This document is applicable to sea-going vessels, harbour vessels, dredgers, and all watercraft, including non-displacement craft, used or capable of being used as a means of transport on water. There are no limitations to the application of this document with regard to speed, length and height of vessels, as long as the ship is determined to act like a point source at the reference distance of 25 m. All noise data obtained in accordance with this document are referred to a reference distance of 25 m.

Acoustics - Measurement of airborne sound emitted by vessels on inland waterways and harbours

NF S31-610*NF EN ISO 11691:2020 声学. 管道消音器无气流状态下插入损耗的测量. 试验室调研法

Domaine d'applicationLe présent document spécifie une méthode de substitution en laboratoire pour déterminer la perte d'insertion, sans écoulement, de silencieux circulaires et rectangulaires en conduit, essentiellement absorbants, ainsi que d'autres éléments en conduit destinés

Acoustics - Measurement of insertion loss of ducted silencers without flow - Laboratory survey method

BS EN ISO 11690-2:2020 声学. 低噪声机器工作间设计的推荐实施规程. 噪声控制测量

Acoustics. Recommended practice for the design of lownoise workplaces containing machinery. Noise control measures

BS EN ISO 11690-1:2020 声学. 低噪声机器工作间设计的推荐实施规程. 噪声控制策略

Acoustics. Recommended practice for the design of low-noise workplaces containing machinery. Noise control strategies

DIN 45689-1:2020 声学. 机场飞机噪声排放的测量. 第1部分: 计算方法; 德文和英文文本

This document specifies a method for the calculation of aircraft noise immission occurring in the vicinity of airports.

Acoustics - Determination of aircraft noise immission at airports - Part 1: Calculation method; Text in German and English

DB11/T 838-2019 地铁噪声与振动控制规范

Code for Noise and Vibration Control of Subway

DIN EN IEC 61265:2018 电声学. 航空噪声测量仪器. 在飞机噪声鉴定中测量声压级装置的性能要求(IEC 61265-2018); 德文版本EN IEC 61265-2018

The document provides requirements for the electroacoustical performance of instruments (that can be components of a complete system) for measurement of the sound produced by aircraft in flight or by an aircraft engine installed on an outdoor test stand. Methods are also indicated by which the performance of such instruments can be tested periodically.

Electroacoustics - Instruments for measurement of aircraft noise - Performance requirements for systems to measure sound pressure levels in noise certification of aircraft (IEC 61265:2018); German version EN IEC 61265:2018

DIN ISO 20816-5:2018 机械振动. 机器振动的测量和评估. 第5部分: 水力发电厂和抽水蓄能厂的机器组(ISO 20816-5-2018)

The document provides specific guidance for measuring and evaluating the severity of vibration of machine sets in hydraulic power generating and pump-storage plants measured in situ. It consideres both the vibration of non-rotating parts, such as casing and bearings, and the radial vibration on the shafts.

Mechanical vibration - Measurement and evaluation of machine vibration - Part 5: Machine sets in hydraulic power generating and pump-storage plants (ISO 20816-5:2018)

ISO 2041:2018 机械振动,冲击和状态监测. 词汇

This document defines terms and expressions unique to the areas of mechanical vibration, shock and condition monitoring.

Mechanical vibration, shock and condition monitoring - Vocabulary

DIN ISO 20816-4:2018 机械振动. 机械振动的测量和评估. 第4部分: 带有流体膜轴承的超过3MW的燃气轮机(ISO 20816-4-2018)

The document provides specific guidance for assessing the severity of vibration measured on both the bearing housings and the shafts of gas turbines in situ. The criteria provided in this document apply to land-based gas turbines with power outputs greater than 3 MW and a normal operating speed of 3000 r/min to 30000 r/min. This part of ISO 20816 provides specific guidance for evaluating the severity of in-situ, broad-band vibration measured radial (i.e. transverse) to the shaft axis on all main bearing housings or pedestals or on the shaft and in the axial direction on thrust bearings. Two criteria are provided for assessing the machine vibration when operating under steady state conditions. One criterion considers the magnitude of the observed vibration; the second considers changes in the magnitude. In addition, different criteria are provided for transient operating conditions, such as run-up and coast-down.

Mechanical vibration - Measurement and evaluation of machine vibration - Part 4: Gas turbines in excess of 3 MW, with fluid-film bearings (ISO 20816-4:2018)

ISO 20816-4:2018 机械振动. 机械振动的测量和评估. 第4部分: 带有流体膜轴承的超过3MW的燃气轮机

Mechanical vibration - Measurement and evaluation of machine vibration - Part 4: Gas turbines in excess of 3 MW, with fluid-film bearings

ISO 11200:2014/Amd 1:2018 声学.机器和设备发射的噪声.工作位置和其他指定位置发射声压级的测量的基本标准的使用导则.修改件1

Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions; Amendment 1

JIS Z 8733 ERRATUM 1:2018 勘误

ERRATUM

JIS Z 8732 ERRATUM 1:2018 勘误

ERRATUM