Specifications-
Performance Specifications
Active degrees of freedom | 6 |
Active bandwidth | 0.6 Hz - 150 Hz |
Passive natural frequency | 18 Hz vertical and horizontal |
Effective active resonant frequency | 0.5 Hz |
Isolation at 1 Hz | 40% - 70% |
Isolation at ≥2 Hz | ≥90% |
Settling time after a 10 lb (4.5 kg) step input (10:1 reduction) | 0.3 sec |
Internal noise | <0.1 nm RMS |
Operating load range per isolator | Low capacity: 400-1100 lbs (181-499 kg) Med capacity: 900-2100 lbs (408-953 kg) Hi capacity: 1900-4500 lbs (862-2041 kg) |
Static lift capacity per isolator | 9000 lbs (4090 kg) |
Stiffness (1000 lb / 454 kg mass, Med capacity isolator) | 40,000 lb/in. (73 x 105 N/m) |
Magnetic field emitted at maximum 4 in.(102 mm) from the isolator | <0.02 μG broadband RMS |
Isolator Design, Dimensions, and Environmental and Utility Requirements
Environmental and safety | CE and RoHS compliant |
Active isolation elements | high-force piezoelectric actuators that receive signal from a high-voltage amplifier with an output of up to 800 VDC |
Passive isolation element | single stiff isotropic elastomer (no compressed air supply required) |
Vibration sensor elements | downward facing geophone type inertial sensors that measure floor vibration below the isolator and deliver voltage proportional to the velocity of vibration motion |
Active feedback control loop | Floor vibration is measured, processed and attenuated below the spring supporting the isolated surface |
Isolator dimensions (WxDxH) | 11.75 x 12.5 x 10.8 in. 300 x 320 x 275 mm |
Isolator weight | 75 lb (34 kg) |
Operating temperature | 50° - 90° F 10° - 32° C |
Storage temperature | -40° - 130° F -40° - 55° C |
Humidity (operating) | 30 - 60% |
System power requirements | 100, 120, 230, 240 VAC 50/60 Hz AC;<600 W CE compliant |
Floor displacement | <480 μin. (12 μm) below 10 Hz |
Isolator count per system | minimum of 3 |
Options | laminated stainless steel platforms, frames, risers, leveling devices, earthquake restraints, lifthoods |
DC-2020 Controller Specifications
Dimensions (WxDxH) | 19 x 8.5 x 1.75 in. 483 x 216 x 45 mm |
Weight | 6.3 lb (2.9 kg) |
Processor | 150/75 MHz dual core |
Sampling rate | 10 kHz |
Analog outputs | 16 channels |
Analog inputs | 16 channels |
Status light | single LED |
Front panel ports | 1x serial USB 2.0 1x serial Micro-USB 1x Ethernet RJ-45 2x BNC |
Rear panel ports | 1x serial USB 2.0 1x Ethernet RJ-45 1x RS-232 DB-9 legacy serial for legacy STACIS 2100 isolators |
User interface | Front panel LCD display Character menu on HyperTerminal Extended GUI for Microsoft Windows Embedded Ethernet GUI |
Performance-
4500 lbs (2045 kg) payload tested with simulated vibration at VC-C (500 μin./s, 12.5 μm/s RMS)
更多详细信息请联系我们!
请扫描二维码查看详细参数
经销商
除厂家/中国总经销商外,我们找不到 TMC STACIS III主动隔振系统 的一般经销商信息,有可能该产品在中国没有其它经销商。
如果您是,请告诉我们,我们的邮件地址是:sales@antpedia.net 请说明: 1.产品名称 2.公司介绍 3.联系方式 |
光学平台
售后服务
我会维修/培训/做方法
如果您是一名工程师或者专业维修科学 仪器的服务商,都可参与登记,我们的平台 会为您的服务精确的定位并展示。