EN 300 422-2-2016

Wireless Microphones; Audio PMSE up to 3 GHz; Part 2: Class B Receivers; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU (V2.1.0)


EN 300 422-2-2016 发布历史

The present document specifies the technical characteristics and methods of measurement for the following types of equipment: 1) Assistive Listening Devices (ALDs); 2) Radio Microphones; 3) In-Ear Monitoring Systems; 4) Wireless Multichannel Audio Systems (WMAS); 5) Tour Guide Systems; with Class B receivers which have reduced performance requirements with respect to sensitivity@ adjacent channel selectivity@ and receiver blocking compared to those with Class A receivers. It does not necessarily include all the characteristics that may be required by a user@ nor does it necessarily represent the optimum performance achievable. Equipment with Class B receivers will support the operation of fewer wireless audio channels in a given amount of spectrum than Class A receivers. The present document applies to equipment operating on radio frequencies up to 3 GHz (as shown in table 1) using analogue@ digital and hybrid (using both analogue and digital) modulation. The maximum power recommended for equipment covered by this multi-part deliverable is 250 mW for radio microphones and 10 mW for ALDs. An exception to this are the Public Hearing Aids defined in the CEPT Report 004 [i.7] and subsequent ECC [i.9] and EC Decisions [i.8] on the ex ERMES band (169@4 MHz to 169@8125 MHz) where 500 mW is defined. The present document covers the essential requirements of Article 3.2 of Directive 2014/53/EU under the conditions identified in annex A. The present document also covers radio microphones used in the 863 MHz to 865 MHz band@ with a maximum power of 10 mW. Electromagnetic Compatibility (EMC) requirements are covered by ETSI EN 301 489-9 [i.4]. National regulations on: 1) maximum power output; 2) licensing status; will take precedence or those detailed in the latest version of: ? EC Decision 2005/928/EC [i.9]; ? ECC/DEC/(05)02 [i.10]; ? the EC SRD Decision [i.8]; or ? CEPT/ERC/REC 70-03 [i.6]@ annex 10 (see http://www.erodocdb.dk/); ? EC Decision 2014/641/EU [i.11].

EN 300 422-2-2016由ETSI - European Telecommunications Standards Institute 发布于 2016-12-01,并于 2017-03-01 实施。

EN 300 422-2-2016的历代版本如下:

 

 

非常抱歉,我们暂时无法提供预览,您可以试试: 免费下载 EN 300 422-2-2016 前三页,或者稍后再访问。

点击下载后,生成下载文件时间比较长,请耐心等待......

 



标准号
EN 300 422-2-2016
发布日期
2016年12月01日
实施日期
2017年03月01日
废止日期
中国标准分类号
/
国际标准分类号
/
发布单位
ETSI - European Telecommunications Standards Institute
引用标准
63
适用范围
The present document specifies the technical characteristics and methods of measurement for the following types of equipment: 1) Assistive Listening Devices (ALDs); 2) Radio Microphones; 3) In-Ear Monitoring Systems; 4) Wireless Multichannel Audio Systems (WMAS); 5) Tour Guide Systems; with Class B receivers which have reduced performance requirements with respect to sensitivity@ adjacent channel selectivity@ and receiver blocking compared to those with Class A receivers. It does not necessarily include all the characteristics that may be required by a user@ nor does it necessarily represent the optimum performance achievable. Equipment with Class B receivers will support the operation of fewer wireless audio channels in a given amount of spectrum than Class A receivers. The present document applies to equipment operating on radio frequencies up to 3 GHz (as shown in table 1) using analogue@ digital and hybrid (using both analogue and digital) modulation. The maximum power recommended for equipment covered by this multi-part deliverable is 250 mW for radio microphones and 10 mW for ALDs. An exception to this are the Public Hearing Aids defined in the CEPT Report 004 [i.7] and subsequent ECC [i.9] and EC Decisions [i.8] on the ex ERMES band (169@4 MHz to 169@8125 MHz) where 500 mW is defined. The present document covers the essential requirements of Article 3.2 of Directive 2014/53/EU under the conditions identified in annex A. The present document also covers radio microphones used in the 863 MHz to 865 MHz band@ with a maximum power of 10 mW. Electromagnetic Compatibility (EMC) requirements are covered by ETSI EN 301 489-9 [i.4]. National regulations on: 1) maximum power output; 2) licensing status; will take precedence or those detailed in the latest version of: ? EC Decision 2005/928/EC [i.9]; ? ECC/DEC/(05)02 [i.10]; ? the EC SRD Decision [i.8]; or ? CEPT/ERC/REC 70-03 [i.6]@ annex 10 (see http://www.erodocdb.dk/); ? EC Decision 2014/641/EU [i.11].

EN 300 422-2-2016系列标准





Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号