This Standard establishes requirements for Integrated Door Opening Assemblies with steel@ wood and fiberglass reinforced doors which are supplied to the customer with integral hardware. At a minimum@ they shall include a door@ frame@ hanging device@ and latching mechanism. Performance requirements include operational@ cycle@ abuse and optional security tests. Tests described in this Standard are performed under laboratory conditions. In actual usage@ results may vary because of installation@ maintenance and environmental conditions. Assemblies provided for fire protection shall have components that have been tested and listed for use on fire door openings by a Nationally Recognized Testing Laboratory (NRTL) and shall be under an in-plant follow-up inspection program. The tests in this Standard were selected to verify the performance and interaction of the door/frame/hardware assembly in a way not covered in their component standards. Hardware components shall be certified to the requirements of the applicable ANSI/BHMA Standards where a certification program is provided. The grade of the hardware components shall be equal to or higher than the grade of the integrated door opening assembly.