STD 650-2013 发布历史

This standard establishes minimum requirements for material@ design@ fabrication@ erection@ and inspection for vertical@ cylindrical@ aboveground@ closed- and open-top@ welded storage tanks in various sizes and capacities for internal pressures approximating atmospheric pressure (internal pressures not exceeding the weight of the roof plates)@ but a higher internal pressure is permitted when additional requirements are met (see 1.1.13). This standard applies only to tanks whose entire bottom is uniformly supported and to tanks in non-refrigerated service that have a maximum design temperature of 93 ??(200 ?? or less (see 1.1.20). This standard is designed to provide industry with tanks of adequate safety and reasonable economy for use in the storage of petroleum@ petroleum products@ and other liquid products. This standard does not present or establish a fixed series of allowable tank sizes; instead@ it is intended to permit the Purchaser to select whatever size tank may best meet his needs. This standard is intended to help Purchasers and Manufacturers in ordering@ fabricating@ and erecting tanks; it is not intended to prohibit Purchasers and Manufacturers from purchasing or fabricating tanks that meet specifications other than those contained in this standard. NOTE A bullet () at the beginning of a paragraph indicates that there is an expressed decision or action required of the Purchaser. The Purchaser's responsibility is not limited to these decisions or actions alone. When such decisions and actions are taken@ they are to be specified in documents such as requisitions@ change orders@ data sheets@ and drawings.

STD 650-2013由API - American Petroleum Institute 发布于 2013-03-01，并于 2016-01-22 实施。

STD 650-2013 发布之时，引用了标准

STD 650-2013的历代版本如下：

1961年12月01日 STD 650-1961
1964年04月01日 STD 650-1964
1966年07月01日 STD 650-1966
1970年06月01日 STD 650-1970
1973年07月01日 STD 650-1973
1980年11月01日 STD 650-1980
1988年11月01日 STD 650-1988
1993年07月01日 STD 650-1993
1998年11月01日 STD 650-1998
2007年06月01日 STD 650-2007
2013年03月01日 STD 650-2013

非常抱歉，我们暂时无法提供预览，您可以试试：免费下载 STD 650-2013 前三页，或者稍后再访问。

注意：点击下载后，生成下载文件时间比较长，请耐心等待......

标准号: STD 650-2013
发布日期: 2013年03月01日
实施日期: 2016年01月22日
废止日期: 无
中国标准分类号: /
国际标准分类号: /
发布单位: API - American Petroleum Institute
引用标准: 518

适用范围: This standard establishes minimum requirements for material@ design@ fabrication@ erection@ and inspection for vertical@ cylindrical@ aboveground@ closed- and open-top@ welded storage tanks in various sizes and capacities for internal pressures approximating atmospheric pressure (internal pressures not exceeding the weight of the roof plates)@ but a higher internal pressure is permitted when additional requirements are met (see 1.1.13). This standard applies only to tanks whose entire bottom is uniformly supported and to tanks in non-refrigerated service that have a maximum design temperature of 93 ??(200 ?? or less (see 1.1.20). This standard is designed to provide industry with tanks of adequate safety and reasonable economy for use in the storage of petroleum@ petroleum products@ and other liquid products. This standard does not present or establish a fixed series of allowable tank sizes; instead@ it is intended to permit the Purchaser to select whatever size tank may best meet his needs. This standard is intended to help Purchasers and Manufacturers in ordering@ fabricating@ and erecting tanks; it is not intended to prohibit Purchasers and Manufacturers from purchasing or fabricating tanks that meet specifications other than those contained in this standard. NOTE A bullet () at the beginning of a paragraph indicates that there is an expressed decision or action required of the Purchaser. The Purchaser's responsibility is not limited to these decisions or actions alone. When such decisions and actions are taken@ they are to be specified in documents such as requisitions@ change orders@ data sheets@ and drawings.

STD 650-2013

Welded Tanks for Oil Storage (Twelfth Edition; Incorporates Errata 1: July 2013@ Addendum 1: September 2014@ Errata 2: December 2014)