60603-5-1987 Connectors for Frequencies Below 3 MHz for Use with Printed Boards Part 5: Edge-Socket Connectors and Two-Part Connectors for Double-Sided Printed Boards with 2.54 mm (0.1 in) Spacing (Edition 1.0)
Connecteurs pour fréquences inférieures à 3 MHz pour utilisation avec cartes imprimées. Cinquième partie: Connecteurs encartables et connecteurs enfichables pour cartes imprimées double face au pas de 2@54 mm (0@1 in) (Edition 1.0)
Connectors for Frequencies Below 3 MHz for Use with Printed Boards Part 5: Edge-Socket Connectors and Two-Part Connectors for Double-Sided Printed Boards with 2.54 mm (0.1 in) Spacing (Edition 1.0) 是非强制性国家标准,您可以免费下载前三页
This standard covers a range of connectors with 2.54 mm (0.1 in) spacing intended to connect a double sided printed board to another printed board or wires. Two kinds of connector are available: - One-part edge-socket connector. Fixed connector or (female) receptacle is intended to mate with edge board contacts. - Two-part connector. Fixed connector or (female) receptacle is intended to mate with free connector of board-mounted (male) connector. For these two cases@ fixed connectors or (female) receptacles are the same. Fixed connectors are available with: - solder terminations for wire@ - solder terminations for board up to 3.44 mm (0.135 in)@ - wrapped terminations. Free connectors are provided with flat solder terminations for double sided board of nominal thickness 1.6 mm (0.063 in). For edge-socket connectors only@ polarization and coding are available by means of a device mounted instead of two opposite contacts.