AMS5629G-2015

Steel@ Corrosion-Resistant@ Bars@ Wire@ Forgings@ Rings@ and Extrusions 13Cr - 8.0Ni - 2.2Mo - 1.1Al Vacuum Induction Plus Consumable Electrode Melted Solution Heat Treated@ Precipitation Hardenable (UNS S13800)

AMS5629G-2015 发布历史

Form This specification covers a corrosion-resistant steel in the form of bars@ wire@ forgings@ flash welded rings@ extrusions@ and stock for forging@ flash welded rings@ or extrusion. For purchase of solution treated and aged product@ use the applicable AMS slash specification (See 8.5). If a slash sheet description is not specified@ solution annealed material shall be supplied. A specific example of a slash specification is: AMS5629/H1000 ?C Precipitation Hardened to H1000 condition Application These products have been used typically for parts requiring corrosion resistance@ stress-corrosion resistance@ high strength up to 600 ??(316 ??@ and good ductility and strength in the transverse direction in large section sizes@ but usage is not limited to such applications. Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking; ARP1110 recommends practices to minimize such conditions. Classification Steels covered by this specification are classified as follows: Melting Practice Type 1 - Steel multiple melted using vacuum-arc consumable electrode process in the final melt cycle Type 2 - Steel multiple melted using electroslag consumable electrode process in the final melt cycle When a type is not specified@ Type I shall be supplied. Maximum Delta Ferrite Content Class A ?C 0.5% max.@ free ferrite Class B ?C 1.0% max.@ free ferrite Class C ?C 2.0% max.@ free ferrite When no class is specified@ any class may be supplied.

AMS5629G-2015由SAE - SAE International 发布于 2015-03-01，并于 2016-08-17 实施。

AMS5629G-2015的历代版本如下：

• 2015年03月01日 AMS5629G-2015

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 AMS5629G-2015 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

AMS5629G-2015

发布日期

2015年03月01日

实施日期

2016年08月17日

废止日期

无

中国标准分类号

/

国际标准分类号

/

发布单位

SAE - SAE International

引用标准

10

适用范围

Form This specification covers a corrosion-resistant steel in the form of bars@ wire@ forgings@ flash welded rings@ extrusions@ and stock for forging@ flash welded rings@ or extrusion. For purchase of solution treated and aged product@ use the applicable AMS slash specification (See 8.5). If a slash sheet description is not specified@ solution annealed material shall be supplied. A specific example of a slash specification is: AMS5629/H1000 ?C Precipitation Hardened to H1000 condition Application These products have been used typically for parts requiring corrosion resistance@ stress-corrosion resistance@ high strength up to 600 ??(316 ??@ and good ductility and strength in the transverse direction in large section sizes@ but usage is not limited to such applications. Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking; ARP1110 recommends practices to minimize such conditions. Classification Steels covered by this specification are classified as follows: Melting Practice Type 1 - Steel multiple melted using vacuum-arc consumable electrode process in the final melt cycle Type 2 - Steel multiple melted using electroslag consumable electrode process in the final melt cycle When a type is not specified@ Type I shall be supplied. Maximum Delta Ferrite Content Class A ?C 0.5% max.@ free ferrite Class B ?C 1.0% max.@ free ferrite Class C ?C 2.0% max.@ free ferrite When no class is specified@ any class may be supplied.