T 326-2005

Standard Method of Test for Uncompacted Void Content of Coarse Aggregate (As Influenced by Particle Shape@ Surface Texture@ and Grading)

T 326-2005 发布历史

This method describes the determination of the loose uncompacted void content of a sample of coarse aggregate. When measured on any aggregate of a known grading@ void content provides an indication of the aggregate's angularity@ sphericity@ and surface texture compared with other coarse aggregates tested in the same grading. Three procedures are included for the measurement of void content. Two use graded coarse aggregate (standard grading or as-received grading)@ and the other uses several individual size fractions for void content determinations: Standard Graded Sample (Method A)??This method uses a standard coarse aggregate grading that is obtained by combining individual sieve fractions from the maximum density curve drawn from the maximum coarse aggregate size. See the section on Preparation of Test Samples for the grading. Individual Size Fractions (Method B)??This method uses each of three coarse aggregate size fractions: (a) 19 mm (3/4 in.) to 12.5 mm (? in.); (b) 12.5 mm (? in.) to 9.5 mm(3/8 in.); (c) 9.5 mm (3/8 in.) to 4.75 mm (No. 4). For this method@ each size is tested separately. As-Received Grading (Method C)??This method uses that portion of the coarse aggregate retained on the 4.75-mm (No. 4) sieve. This standard may involve hazardous materials@ operations@ and equipment. This standard does not purport to address all of the safety problems@ if any@ associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulation limitations prior to its use.

T 326-2005由AASHTO - American Association of State Highway and Transportation Officials 发布于 2005-01-01，并于 2010-09-21 实施。

T 326-2005的历代版本如下：

• 2005年01月01日 T 326-2005

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 T 326-2005 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

T 326-2005

发布日期

2005年01月01日

实施日期

2010年09月21日

废止日期

无

中国标准分类号

/

国际标准分类号

/

发布单位

AASHTO - American Association of State Highway and Transportation Officials

引用标准

7

适用范围

This method describes the determination of the loose uncompacted void content of a sample of coarse aggregate. When measured on any aggregate of a known grading@ void content provides an indication of the aggregate's angularity@ sphericity@ and surface texture compared with other coarse aggregates tested in the same grading. Three procedures are included for the measurement of void content. Two use graded coarse aggregate (standard grading or as-received grading)@ and the other uses several individual size fractions for void content determinations: Standard Graded Sample (Method A)??This method uses a standard coarse aggregate grading that is obtained by combining individual sieve fractions from the maximum density curve drawn from the maximum coarse aggregate size. See the section on Preparation of Test Samples for the grading. Individual Size Fractions (Method B)??This method uses each of three coarse aggregate size fractions: (a) 19 mm (3/4 in.) to 12.5 mm (? in.); (b) 12.5 mm (? in.) to 9.5 mm(3/8 in.); (c) 9.5 mm (3/8 in.) to 4.75 mm (No. 4). For this method@ each size is tested separately. As-Received Grading (Method C)??This method uses that portion of the coarse aggregate retained on the 4.75-mm (No. 4) sieve. This standard may involve hazardous materials@ operations@ and equipment. This standard does not purport to address all of the safety problems@ if any@ associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulation limitations prior to its use.