CSA/ANSI NGV 2-2023
压缩天然气汽车燃料容器

Compressed natural gas vehicle fuel containers

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 CSA/ANSI NGV 2-2023 前三页，或者稍后再访问。

您也可以尝试购买此标准，
点击右侧 “立即购买” 按钮开始采购（由第三方提供）。

标准号

CSA/ANSI NGV 2-2023

发布

2023年

发布单位

SCC

当前最新

CSA/ANSI NGV 2-2023

 

 

代替标准

75.160.30 75.200

被代替标准

ANSI NGV 2-2007

适用范围

1 Scope 1.1 General This Standard concerns high-pressure containers for the on-board storage of natural gas as a fuel for automotive vehicles. This Standard contains requirements for the material, design, manufacture, and testing of serially produced, refillable Type NGV 2 containers intended for the storage of compressed natural gas (CNG) for vehicle operation. These containers are to be permanently attached to the vehicle. This Standard applies to containers up to and including 1000 L (35.4 ft3) water capacity. Note: In Canada, the use of gas containers is governed by the Act. In the United States, the use of gas containers is governed by the U.S. Department of Transportation 1.2 Container types 1.2.1 Cylindrical containers Type NGV 2 containers are designated as follows: a) Type 1: metal; b) Type 2: hoop-wrapped container with resin-impregnated continuous filaments and a metal liner with a minimum burst pressure of 125% of service pressure; c) Type 3: fully wrapped container with resin-impregnated continuous filaments and with a metal liner; and d) Type 4: fully wrapped container with resin-impregnated continuous filaments and with a nonmetallic liner. 1.2.2 Conformable containers Conformable container types are designated as follows: a) CT1: container or assembly of a non-cylindrical or non-spherical (i.e., irregular) shape without a protective shell (i.e., outside wall containing gas pressure); b) CT2: container or assembly of possibly irregular shape within a conformable protective shell that is acting as a shield and not directly assisting the inner container with containing gas pressure; and c) CT3: container or assembly of possibly irregular shape within a conformable protective shell that is acting as a shield and directly assisting the inner container with containing gas pressure. The conformable container types are an additional identifier that is used in combination with the container type. A conformable container is designated based on the design as a Type 1 (metal) to Type 4 (resin-impregnated continuous filament with a nonmetallic liner) with the additional conformable type identifier. For example, a Type 4 CT2 container would be required to meet the criteria for a Type 4 container as well as the criteria specified for a CT2 container. 1.3 Welded containers This Standard does not cover welded metal containers or liners. 1.4 Precedence of requirements Where a clause in this Standard conflicts with codes or standards referenced in this Standard, the requirements of this Standard take precedence. 1.5 Requalification of containers Type 1 steel containers may be requalified for further service in accordance with the procedure described in Annex E. 1.6 Canadian specific requirements Annex Acontains requirements that are applicable only to Canada. 1.7 Terminology In this Standard, “shall” is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the Standard; “should” is used to express a recommendation or that which is advised but not required; and “may” is used to express an option or that which is permissible within the limits of the Standard. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requirements. Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application. 1.8 Units of measure The values given in SI units are the units of record for the purposes of this Standard. The values given in parentheses are for information and comparison only. See also Annex D.

CSA/ANSI NGV 2-2023相似标准

推荐