ASTM E363-23
铬和铬铁化学分析的标准试验方法

Standard Test Methods for Chemical Analysis of Chromium and Ferrochromium


标准号
ASTM E363-23
发布
2023年
发布单位
美国材料与试验协会
当前最新
ASTM E363-23
 
 
引用标准
ASTM A101 ASTM A481 ASTM D1193 ASTM E135 ASTM E1601 ASTM E173 ASTM E29 ASTM E32 ASTM E50 ASTM E60
适用范围
1.1 These test methods cover the chemical analysis of chromium and ferrochromium having chemical compositions within the following limits: Element Composition, % Aluminum 0.25 max Antimony 0.005 max Arsenic 0.005 max Bismuth 0.005 max Boron 0.005 max Carbon 9.00 max Chromium 51.0 to 99.5 Cobalt 0.10 max Columbium 0.05 max Copper 0.05 max Lead 0.005 max Manganese 0.75 max Molybdenum 0.05 max Nickel 0.50 max Nitrogen 6.00 max Phosphorus 0.03 max Silicon 12.00 max Silver 0.005 max Sulfur 0.07 max Tantalum 0.05 max Tin 0.005 max Titanium 0.50 max Vanadium 0.50 max Zinc 0.005 max Zirconium 0.05 max 1.2 The analytical procedures appear in the following order: Sections Arsenic by the Molybdenum Blue Spectrophotometric Test Method [0.001 % to 0.005 %] 10 – 20 Lead by the Dithizone Spectrophotometric Test Method [0.001 % to 0.05 %] 21 – 31 Chromium by the Sodium Peroxide FusionTitrimetric Test Method [50.0 % to 99.5 %] 32 – 38 1.3 Units—The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Specific hazard statements are given in Section 6 and in special “Warning” paragraphs throughout these test methods. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

ASTM E363-23相似标准


推荐

多项光谱法将成为钢铁有色金属行业国家标准

全国钢标准化技术委员会 湖北出入境检验检疫局、武汉钢铁(集团)公司等 金属和合金腐蚀 低铬铁素体不锈钢晶间腐蚀试验方法 推荐 制定 2015 中国钢铁工业协会 全国钢标准化技术委员会 宝钢不锈钢有限公司、冶金工业信息标准研究院 无缝焊接铁磁性钢管(埋弧焊除外)自动全周向磁漏检测 推荐 修订 GB/T 12606-1999 ISO 10893-3:2011...

555项拟立项国家标准立项在即 涉光谱、色谱、质谱检测

推修铌铪合金化学分析方法 铪、钛、锆、钨、钽等元素测定 电感耦合等离子体原子发射光谱法推制钽铌化学分析方法第7部分:铌中磷量测定 4-甲基-戊酮-[2]萃取分离磷钼蓝分光光度法电感耦合等离子体原子发射光谱法推修金镍铬铁硅硼合金化学分析方法 第1部分:金量测定 硫酸亚铁电位滴定法推制金镍铬铁硅硼合金化学分析方法 第2部分:镍量测定 丁二酮肟重量法推制金镍铬铁硅硼合金化学分析方法 第3部分:...

矿石成分分析 矿产稀土成分鉴定报告

矿石,精矿,稀土矿,石灰石,炉渣,耐火材料等常量,微量,痕量元素分析  有色金属及合金成分分析  再生金属定性定量分析  钢材及合金成分鉴定  贵金属化合物,贵金属合金,含有贵金属物料废物定性定量分析  纯高金属,半导体材料成分分析  未知物成分分析  水体,土壤,固废等环境样品检测  承担参与国际,国家及行业标准制定修订  各级政府部门委托产品质量监督抽查产品质量评价  人员培训技术推广...

形态分析元素应用

锰在城市灰尘中主要以二价硫酸锰形态存在,在室内灰尘中则以不同二价锰混合物形态存在;在城市灰尘中最有可能以铬铁矿(FeCr2O4)形态存在,在室内灰尘中主要以三氧化二少量铬铁矿等混合物形态存在。该研究除对飘尘中元素形态进行分析外还结合进行了纳米尺度表征分析,这有助于对毒性元素生物有效性及其迁移转化规律提供更多信息。...


谁引用了ASTM E363-23 更多引用





Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号