ASTM G215-16
电极电位测量的标准指南

Standard Guide for Electrode Potential Measurement

被代替

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 ASTM G215-16 前三页，或者稍后再访问。

您也可以尝试购买此标准，
点击右侧 “立即购买” 按钮开始采购（由第三方提供）。

标准号

ASTM G215-16

发布

2016年

发布单位

美国材料与试验协会

替代标准

ASTM G215-17

当前最新

ASTM G215-17

 

 

适用范围

5.1 Electrode potential is the reversible work that is required to transfer a unit of positive charge between the surface in question and a reference electrode through the electrolyte that is in contact with both electrodes. The sign of the electrode potential is determined by the Gibbs Stockholm Convention described in Practice G3.

5.2 The electrode potential of a surface is related to the Gibbs free energy of the oxidation/reduction reactions occurring at the surface in question compared to the Gibbs free energy of the reactions occurring on the reference electrode surface.4

5.3 Electrode potentials are used together with potential-pH (Pourbaix) diagrams to determine the corrosion products that would be in equilibrium with the environment and the electrode surface.5

5.4 Electrode potentials are used in the estimation of corrosion rates by several methods. One example is by means of Tafel line extrapolation, see Practices G3 and G102. Polarization resistance measurements are also determined using electrode potential measurements, see Test Method G59 and Guide G96.

5.5 Corrosion potential measurements are used to determine whether metal surfaces are passive in the environment in question, see Test Method C876.

5.6 Corrosion potential measurements are used in the evaluation of alloys to determine their resistance or susceptibility to various forms of localized corrosion, see Test Methods F746, F2129, G61, and G150.

5.7 Corrosion potentials are used to determine the metallurgical condition of some aluminum alloys, see Test Method G69. Similar measurements have been used with hot dipped galvanized steel to determine their ability to cathodically polarize steel. See Appendix X2.

5.8 Corrosion potentials are used to evaluate aluminum and magnesium alloys as sacrificial anodes for underground and immersion cathodic protection application, see Test Method G97 and NACE TM0190–2012.

5.9 Corrosion potentials are used to evaluate the galvanic performance of alloy pairs for use in seawater and other conductive electrolytes, see Test Method F3044, Guide G71, and Guide G82.

5.10 Electrode potential measurements are used to establish cathodic protection levels to troubles......

电极电位测量中的参比电极

如电极电位的定义所示，要测量金属的电极电位，必须将该金属与氢电极组成测量电池，然后用电位差计或其他测量仪器测出该电池的电动势。氢电极在金属电极电位测量中起比较电极的作用，电化学测量中将它称为参比电极。由于氢电极制作和使用都较困难，在实际测量中，经常采用比较方便的饱和甘汞电极、银-氯化银电极和铜-硫酸铜电极等作为参比电极。...

标准电极电位的相关问题

例如电对Zn2+/Zn的标准电极电位的数值为-0.76伏，较Cu数值+0.34伏为小，所以Zn原子较Cu原子容易失去电子，即Zn是较强的还原剂。　　（4）物质的还原态的还原能力越强，其对应的氧化态的氧化能力就越弱，标准电极电位越小；物质氧化态的氧化能力越强，其对应的还原态的还原能力就越弱，标准电极电位越大。...

标准电极电位的基本概述

　　标准电极电位是以标准氢原子作为参比电极，即氢的标准电极电位值定为0，与氢标准电极比较，电位较高的为正，电位较低者为负。如氢的标准电极电位H2←→H+ 为0.000V，锌标准电极电位Zn ←→Zn2+ 为-0.762V，铜的标准电极电位Cu ←→Cu2+为+0.342V。　　金属浸在只含有该金属盐的电解溶液中，达到平衡时所具有的电极电位，叫做该金属的平衡电极电位。...

标准电极电位的正确使用

电极电位是表示某种离子或原子获得电子而放还原的趋势。如将某一金属放进它的溶液中（规定溶液中金属离子的浓度为lm），在25℃时，金属电极与标准氢电极（电极电位为零）之间的电位差，叫做该金属的标准电极电位。一些金属、非金属以及同一种金属具有不同价态的离子的标准电极电位，这些数值都是与标准氢电极比较而得出的。...