Replacement: This part of IEC 61558 deals with the safety of small reactors for general applications. NOTE 1 Safety includes electrical@ thermal and mechanical aspects. Unless otherwise specified@ from here onward@ the term transformer or reactor covers small reactors. This part is applicable to stationary or portable@ single-phase or polyphase@ air-cooled (natural or forced) general purpose reactors including alternating current@ premagnetised and current compensated independent or associated reactors. The rated supply voltage does not exceed 1 000 V a.c. or 1 500V ripple-free d.c.@ the rated supply frequency and the internal operational frequencies do not exceed 1 MHz. The rated power does not exceed: ?C 25 kVAR a.c. (25 kW d.c.) for single-phase reactors@ ?C 50 kVAR a.c. (50 kW d.c.) for poly-phase reactors. This part is applicable to reactors without limitations of the rated power subject to an agreement between the purchaser and the manufacturer. This part is applicable to dry-type reactors. The windings may be encapsulated or nonencapsulated. This part does not apply to: ?C reactors covered by IEC 60289; ?C ballast for tubular fluorescent covered by IEC 61347-2-8; ?C ballast for discharge lamps (excluding tubular fluorescent lamps) covered by IEC 61347-2-9. NOTE 2 For reactors filled with liquid dielectric or pulverised material such as sand@ additional requirements are under consideration. NOTE 3 Attention is drawn to the following: - for reactors intended to be used in vehicles@ on board ships@ and aircraft@ additional requirements (from other applicable standards@ national rules@ etc.) may be necessary; - measures to protect the enclosure and the components inside the enclosure against external influences such as fungus@ vermin@ termites@ solar-radiation@ and icing should also be considered; - the different conditions for transportation@ storage@ and operation of the reactor should also be considered; - additional requirements in accordance with other appropriate standards and national rules may be applicable to reactors intended for use in special environments@ such as tropical environment. NOTE 4 Normally@ reactors are intended to be associated with equipment for functional requirements of the equipment or requirements by the installation rules or by other appliance specifications. NOTE 5 Reactors incorporating electronic circuits and components are also covered by this standard. NOTE 6 The protection against electric shock may be provided (or completed) by other parts or features of the equipment@ such as the body. NOTE 7 Reactors for particular applications will in the future be covered by complementary normative annexes. NOTE 8 Future technological development of reactors may necessitate a need to increase the upper limit of the frequencies@ until then this part may be used as a guidance document.
EN 61558-2-20-2011由CENELEC - European Committee for Electrotechnical Standardization 发布于 2011-02-01,并于 2011-03-28 实施。
非常抱歉,我们暂时无法提供预览,您可以试试: 免费下载 EN 61558-2-20-2011 前三页,或者稍后再访问。
点击下载后,生成下载文件时间比较长,请耐心等待......
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号