Proposed Test procedure for Evaluation of Systems of Insulating Materials for Electric Machinery Employing Form-Wound Pre-Insulated Coils (Machines rated at 50-2000 horsepower and below 6600 volts)
"Purpose.??The chief purpose of this test procedure is to classify insulation systems in accordance with their temperature limits by test@ rather than by chemical composition. The intention is@ first@ to classify according to the recognized A@ B and H categories@ whose usual continuous hot-spot temperatures are 105@ 130 and 180C@ respectively. Second@ to ascertain whether it is appropriate to change the present hot-spot temperatures for certain applications. It is not the intention to use this procedure at present to define any new or intermediate insulation classes. A wide variety of synthetic electrical insulating materials are available for application in electric machinery and apparatus. Included in these materials are the silicones@ fluorocarbons@ wire enamels@ new films@ rubbers and varnishes. As there is a growing tendency to either rely solely on these materials as electrical insulation@ or to employ them with the old familiar materials in novel combinations@ there is a corresponding increase in the problems associated with the selection and evaluation of insulations. Frequently an insulation ""system"" or combination of insulation materials must be evaluated rather than one insulating ""material"". Many of the specifications regulating the use of insulation materials were written before the advent of the newer synthetics and were based upon experience gained with the old materials over a long period of time. Difficulties arise@ therefore@ when an effort is made to classify these new materials or combinations for insulation purposes under the American Standards as Class A@ Class B or Class H insulations. This test procedure has been prepared to outline useful procedures for the evaluation of systems of insulation for form-wound rotating electric machines. It is expected that the several insulating materials@ or components@ making up any insulation system to be tested will first be screened in accordance with specific test procedures for each type of material. This procedure is intended to evaluate insulation systems for use in usual service conditions with air cooling. It does not cover such special requirements as machines enclosed in gas atmospheres@ subjected to strong chemicals@ to metal dusts or to submersion in liquids. "