ASTM F3309/F3309M-24由美国材料与试验协会 US-ASTM 发布于 2024-03-28。
ASTM F3309/F3309M-24在国际标准分类中归属于: 49.020 航空器和航天器综合。
ASTM F3309/F3309M-24 小型飞机系统和设备简化安全评估的标准实施规程的最新版本是哪一版?
最新版本是 ASTM F3309/F3309M-24 。
1.1 This practice covers methods for conducting a simplified safety assessment of aircraft systems and equipment. The material was developed through open consensus of international experts in general aviation. This information was created by focusing on Level 1 and Level 2 Normal Category aeroplanes employing conventional systems. The content may be more broadly applicable. It is the responsibility of the Applicant to substantiate broader applicability as a specific means of compliance. If the criteria specified within this simplified practice is deemed not to be relevant to a particular application, the Applicant should use the safety assessment process defined in Practice F3230 . The topics covered within this practice are: Procedural Flowchart, Failure Condition Identification and Classification, Safety Objectives, Design and Installation Appraisal, Qualitative Analysis of Failure Conditions, Common Mode Analysis, Use of Similarity, and Documentation. 1.2 An applicant intended to propose this information as Means of Compliance for a design approval must seek guidance from their respective oversight authority (for example, published guidance from applicable CAA) concerning the acceptable use and application thereof. For information on which oversight authorities have accepted this standard (in whole or in part) as an acceptable Means of Compliance to their regulatory requirements (hereinafter “the Rules”), refer to the ASTM Committee F44 web page (www.astm.org/COMMITTEE/F44.htm). 1.3 Units— This practice may present information in SI units, English Engineering units, or both; the values stated in each system may not be exact equivalents. Each system shall be used independently of the other; combining values from the two systems may result in nonconformance with the standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
几乎所有的交通工具都要用到电池,如果发生故障可能导致不同程度的后果。特别是在飞机上,电源起着至关重要的作用。蓄电池作为飞机电气系统中的应急供电单元,在主发电机及APU发电机不能正常工作时,为保证飞机飞行安全的关键设备供电,同时还可以作为航前和航后短时维护用电源,在飞机飞行安全中起着至关重要的作用。目前,航空领域应用的蓄电池主要有镍镉蓄电池和锂离子蓄电池。...
飞机系统已经从原来的115V L-N /208VL-L,400Hz固定频率转变为以115VAC和230VAC为基础的机载电源系统,工作频率范围从360到800Hz。这种宽频率简化了机械复杂性,现在发电机可以变化频率以调节引擎的速度。一些航空电子设备测试标准存在军事和商业航空的机载设备,确保电源总线在实际使用中可能发生的波动和异常免疫。...
根据这一计划,中国商飞将采用国际通行的认证认可手段,依据国际先进标准建立航空产业质量管理体系(AS9100);对标欧洲EASA、美国FAA等国际适航认证要求,建立健全适应国际航空产业特定要求的质量、安全、环境、能源、职业健康安全等管理规范,加快国际适航认证标准、规范的等效转化,助推国产大飞机进入国际航空市场;针对国产大飞机项目系统集成度高、供应商众多等特点,建立供应商分类分级管理模式,对航材、航空设备...
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号