SAE J2570-2019
SAE J 2570-2009
SAE J2570-2019 发布历史
"This SAE Information Report defines the minimum performance specifications for accelerometers@ load cells@ and angular position transducers used within Anthropomorphic Test Devices (ATDs) when performing impact tests per SAE J211@ ""Instrumentation for Impact Test"". This report does not define methodology and equipment for performing verification tests of the transducers. It is intended that any agency proposing to conduct tests in accordance with SAE J211 shall be able to demonstrate that the transducers they use would meet the performance requirements specified in this document. Purpose The purpose of this document is to provide guidelines for choosing accelerometers@ load cells@ and angular position transducers for use in impact testing. The aim is to provide uniformity in transducer measurements@ and provide a basis for meaningful comparisons of test results from different sources. Field of Application The transducer specifications defined in this document apply in particular to those transducers used within ATDs@ and whose outputs are used to calculate various injury estimates. The transducer specifications also apply to sensors used for the calibration of ATDs."
SAE J2570-2019由SAE - SAE International 发布于 2019-01-01，并于 2019-01-01 实施。
SAE J2570-2019的历代版本如下：
- 2001年09月01日 SAE J2570-2001
- 2009年08月12日 SAE J2570-2009 拟人试验装置传感器的性能规范
- 2019年01月01日 SAE J2570-2019 SAE J 2570-2009
- 标准号
- SAE J2570-2019
- 发布日期
- 2019年01月01日
- 实施日期
- 2019年01月01日
- 废止日期
- 无
- 中国标准分类号
- /
- 国际标准分类号
- /
- 发布单位
- SAE - SAE International
- 适用范围
- "This SAE Information Report defines the minimum performance specifications for accelerometers@ load cells@ and angular position transducers used within Anthropomorphic Test Devices (ATDs) when performing impact tests per SAE J211@ ""Instrumentation for Impact Test"". This report does not define methodology and equipment for performing verification tests of the transducers. It is intended that any agency proposing to conduct tests in accordance with SAE J211 shall be able to demonstrate that the transducers they use would meet the performance requirements specified in this document. Purpose The purpose of this document is to provide guidelines for choosing accelerometers@ load cells@ and angular position transducers for use in impact testing. The aim is to provide uniformity in transducer measurements@ and provide a basis for meaningful comparisons of test results from different sources. Field of Application The transducer specifications defined in this document apply in particular to those transducers used within ATDs@ and whose outputs are used to calculate various injury estimates. The transducer specifications also apply to sensors used for the calibration of ATDs."