GSO ISO 19703:2013
火灾中有毒气体的产生和分析 计算物种产量 相当于实验火灾中的燃烧效率比

Generation and analysis of toxic gases in fire -- Calculation of species yields, equivalence ratios and combustion efficiency in experimental fires


GSO ISO 19703:2013 发布历史

GSO ISO 19703:2013由GSO 发布于 2013-12-31。

GSO ISO 19703:2013在国际标准分类中归属于: 13.220.01 消防综合。

GSO ISO 19703:2013 火灾中有毒气体的产生和分析 计算物种产量 相当于实验火灾中的燃烧效率比的最新版本是哪一版?

最新版本是 GSO ISO 19703:2013

GSO ISO 19703:2013的历代版本如下:

  • 2013年 GSO ISO 19703:2013 火灾中有毒气体的产生和分析 计算物种产量 相当于实验火灾中的燃烧效率比

 

This International Standard provides definitions and equations for the calculation of toxic product yields and the fire conditions under which they have been derived in terms of equivalence ratio and combustion efficiency. Sample calculations for practical cases are provided. The methods can be used to produce either instantaneous or averaged values for those experimental fires in which time-resolved data are available. This International Standard is intended to provide guidance to fire researchers for — appropriate experimental fire data to be recorded, — calculating average yields of gases and smoke in fire effluents in fire tests and fire-like combustion in reduced scale apparatus, — characterizing burning behaviour in experimental fires in terms of equivalence ratio and combustion efficiency using oxygen consumption and product generation data. This International Standard does not provide guidance on the operating procedure of any particular piece of apparatus or interpretation of data obtained therein (e.g. toxicological significance of results).

标准号
GSO ISO 19703:2013
发布
2013年
发布单位
GSO
当前最新
GSO ISO 19703:2013
 
 

GSO ISO 19703:2013相似标准


推荐

服务项目 | 以轨道交通为例防火阻燃服务能力

大量试验实际案例表明,在实际火灾,乘客遇到第一个危险不是火焰高温,而是因为火焰燃烧车厢内设备所产生有毒气体。吸入有害气体后,乘客有可能会快速失去应对能力,进而在火灾遭遇危险。这个试验能力包括烟密度测试毒性气体分析两个方面。...

科普锥形量热仪应用及原理等相关知识

TTI可以用来评价比较材料耐火性能。毒性测定材料燃烧时会释放出多种气体,包括CO、HCN、SO2、HCl、H2S等有毒气体有毒气体对人体有很大危害。它们组成百分可以通过锥形量热计附加设备进行收集分析。锥形量热仪要点如下:主要由六部分组成:燃烧室、装载平台、氧气分析仪、烟雾测量系统、通风装置及相关辅助设备。 氧气分析仪氧气分析仪是圆锥核心部件。这是一种高精度。...

沥青及沥青路面燃烧性能研究

图6 燃烧阶段CO、CO2释放量消光面积(Specific extinction area,SEA)指在燃烧过程某时刻单位质量试样燃烧产生烟量,表示试样分解挥发单位质量可燃物所产生能力。从试验结构看沥青材料生烟能力极强,试样在燃烧过程发烟量极大,保证救援逃生条件可见度极差。...

锥形量热仪性能及参数解读

二、烟生成速率(Smoke Produce Rate,简称SPR)SPR 被定义为消光面积与质量损失速率之比,单位为m2/ S ,式SEA为消光面积(Specific Extinction Area),SEA表示挥发单位质量材料所产生烟,它不直接表示生烟量大小,只是计算生烟量一个转换因子,单位为m?/kg。...





Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号