GSO ISO 14855-1:2011由GSO 发布于 2011-10-12。
GSO ISO 14855-1:2011在国际标准分类中归属于: 83.080.01 塑料综合。
GSO ISO 14855-1:2011 复合肥料受控条件下塑料材料需氧生物分解峰值的估算 二氧化碳气体上升的分析方法 第1部分:通用方法的最新版本是哪一版?
最新版本是 GSO ISO 14855-1:2011 。
ISO 14855-1:2005 specifies a method for the determination of the ultimate aerobic biodegradability of plastics, based on organic compounds, under controlled composting conditions by measurement of the amount of carbon dioxide evolved and the degree of disintegration of the plastic at the end of the test. This method is designed to simulate typical aerobic composting conditions for the organic fraction of solid mixed municipal waste. The test material is exposed to an inoculum which is derived from compost. The composting takes place in an environment wherein temperature, aeration and humidity are closely monitored and controlled. The test method is designed to yield the percentage conversion of the carbon in the test material to evolved carbon dioxide as well as the rate of conversion. Also specified is a variant of the method, using a mineral bed (vermiculite) inoculated with thermophilic microorganisms obtained from compost with a specific activation phase, instead of mature compost. This variant is designed to yield the percentage of carbon in the test substance converted to carbon dioxide and the rate of conversion.
▲反应器示意图 适用标准:(1) GB/T 19277.1-2011:受控堆肥条件下材料最终需氧生物分解能力的测定采用测定释放的二氧化碳的方法 第1部分:通用方法;(2) ISO 14855.1-2012:在控制复合条件下塑料材料富氧菌生物降解性和非集合性的测定.二氧化碳增量分析法.第1部分:通用方法;(3) ASTM D5338-2015:测定受控合成条件, 合并嗜热温度条件下塑料材料曝气生物降解能力的标准试验方法...
三、生物降解性标准:围绕塑料降解的第2个要点,也就是生物降解性,目前常用于塑料生物降解的相关标准有:GB/T 19277.1-2011(等同ISO 14855-1:2005)受控堆肥条件下材料终需氧生物分解和崩解能力的测定 采用测定释放的二氧化碳的方法 第1部分 通用方法GB/T 19277.2-2013(等同ISO 14855-2:2007)受控堆肥条件下材料终需氧生物分解能力的测定 采用测定释放的二氧化碳的方法...
我司所开发的RTK PBDA-300堆肥降解测试设备,按照《GB/T19277.1受控堆肥条件下材料最终需氧生物分解能力的测定采用测定释放的二氧化碳的方法第1部分:通用方法》要求研制,该设备可提供一个稳定的受控模拟需氧堆肥条件。在此条件下,试验材料在降解反应容器中进行强烈的需氧降解,并释放CO2气体,设备通过气体传感器实时在线监测CO2产量,软件自动记录和保存数据。...
释出二氧化碳的分析方法GB/T38737塑料 受控污泥消化系统中材料最终厌氧生物分解率测定 采用测量释放生物气体的方法GB/T33797塑料 在高固体份堆肥条件下最终厌氧生物分解能力的测定 采用分析测定释放生物气体的方法DB46/T505参考海南地标《塑料制品中不可降解成分的快速 检测》实验室内部方法参考GB/T20197-2006 标注出降解和不可降解成分及比例实验室内部方法参考GB/T20197...
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号