GSO ISO 14855-1:2011
复合肥料受控条件下塑料材料需氧生物分解峰值的估算 二氧化碳气体上升的分析方法 第1部分:通用方法

Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions - Method by analysis of evolved carbon dioxide - Part 1: General method


 

 

非常抱歉,我们暂时无法提供预览,您可以试试: 免费下载 GSO ISO 14855-1:2011 前三页,或者稍后再访问。

您也可以尝试购买此标准,
点击右侧 “立即购买” 按钮开始采购(由第三方提供)。

 

标准号
GSO ISO 14855-1:2011
发布
2011年
发布单位
GSO
当前最新
GSO ISO 14855-1:2011
 
 
适用范围
ISO 14855-1:2005 specifies a method for the determination of the ultimate aerobic biodegradability of plastics, based on organic compounds, under controlled composting conditions by measurement of the amount of carbon dioxide evolved and the degree of disintegration of the plastic at the end of the test. This method is designed to simulate typical aerobic composting conditions for the organic fraction of solid mixed municipal waste. The test material is exposed to an inoculum which is derived from compost. The composting takes place in an environment wherein temperature, aeration and humidity are closely monitored and controlled. The test method is designed to yield the percentage conversion of the carbon in the test material to evolved carbon dioxide as well as the rate of conversion. Also specified is a variant of the method, using a mineral bed (vermiculite) inoculated with thermophilic microorganisms obtained from compost with a specific activation phase, instead of mature compost. This variant is designed to yield the percentage of carbon in the test substance converted to carbon dioxide and the rate of conversion.

GSO ISO 14855-1:2011相似标准


推荐

什么是可堆肥塑料生物降解测试系统?

▲反应器示意图 适用标准:(1) GB/T 19277.1-2011:受控堆肥条件下材料最终生物分解能力测定采用测定释放二氧化碳方法 1部分通用方法;(2) ISO 14855.1-2012:在控制复合条件下塑料材料生物降解性和非集合性测定.二氧化碳增量分析法.1部分通用方法;(3) ASTM D5338-2015:测定受控合成条件, 合并嗜热温度条件下塑料材料曝气生物降解能力标准试验方法...

浅谈限塑令下生物降解标准和仪器设备

三、生物降解性标准:围绕塑料降解2个要点,也就是生物降解性,目前常用于塑料生物降解相关标准有:GB/T 19277.1-2011(等同ISO 14855-1:2005)受控堆肥条件下材料生物分解和崩解能力测定 采用测定释放二氧化碳方法 1部分 通用方法GB/T 19277.2-2013(等同ISO 14855-2:2007)受控堆肥条件下材料生物分解能力测定 采用测定释放二氧化碳方法...

国际无塑料袋日 我们能做不止是堆肥降解测试设备

我司所开发RTK PBDA-300堆肥降解测试设备,按照《GB/T19277.1受控堆肥条件下材料最终生物分解能力测定采用测定释放二氧化碳方法1部分通用方法》要求研制,该设备可提供一个稳定受控模拟堆肥条件。在此条件下,试验材料在降解反应容器中进行强烈降解,并释放CO2气体,设备通过气体传感器实时在线监测CO2产量,软件自动记录和保存数据。...

活动邀约|生物塑料到底能不能降解?哪些产品堆肥降解检测能合格?微谱带你来一探究竟

释出二氧化碳分析方法GB/T38737塑料 受控污泥消化系统中材料最终厌生物分解率测定 采用测量释放生物气体方法GB/T33797塑料 在高固体份堆肥条件下最终厌生物分解能力测定 采用分析测定释放生物气体方法DB46/T505参考海南地标《塑料制品中不可降解成分快速 检测》实验室内部方法参考GB/T20197-2006 标注出降解和不可降解成分及比例实验室内部方法参考GB/T20197...





Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号