"The attached inspection guidelines are recommended for use during structured analyzer system inspection. The inspection should be performed by qualified individuals. This recommended practice is intended to be a guide and not a ""how to"" document. These are guidelines and should be modified to include any special project requirements. These guidelines cover three basic areas@ which are: a) ANALYZER INSPECTION: Inspection of an analyzer and the analyzer-specific application engineering. b) PACKAGED ANALYZER SYSTEM INSPECTION: Inspection of an analyzer building@ shelter@ enclosure@ highway controllers@ and any other equipment used to support the analyzer operation (other than the analyzer and its sample system). c) SAMPLE SYSTEM INSPECTION: Inspection of all vendor-supplied equipment that will be installed between the process sample tap and the analyzer. For the purposes of this document@ STRUCTURED TESTING is defined as any witnessed test procedure that follows a predefined format. Purpose The purpose of this recommended practice is to establish procedures for analyzer@ packaged analyzer system@ and sample system inspection and testing. The guidelines are intended to provide minimum requirements for inspecting and testing analyzers@ sample systems@ and analyzer systems prior to final acceptance. In no instance is this recommended practice intended to override any established company procedures."