IMS Network Testing (INT); IMS NNI Interoperability Test Specifications; Part 1: Test purposes for IMS NNI Interoperability (V4.1.3; Includes Diskette)
The present document specifies interoperability Test Purposes (TPs) for IMS NNI interworking based on the IP Multimedia Call Control Protocol based on Stage 3 Session Initiation Protocol (SIP) and Session Description Protocol (SDP) standard@ TS 124 229 [1]. TPs are defined using the TPLan notation also described in ES 202 553 [4]. Test purposes have been written based on the test specification framework described in TS 102 351 [2] and the interoperability testing methodology defined in TS 102 237-1 [3]@ i.e. interoperability testing with conformance checking. The scope of these test purposes is not to cover all requirements specified in TS 124 229 [1]. TPs have been only specified for requirements that are observable at the interface between two IMS core network implementations@ i.e. IMS NNI. For the purpose of the present document an IMS core network as a whole - not its components - are considered to be under test. In a separate section a set of test purposes has been developed to cover the MGCF aspects as defined in clause 5.5 of TS 124 229 [1]. To trigger events at the Mg and Mj reference point the IMS core network will connect to a PSTN network via an MGCF. The interworking between IMS and PSTN is described in TS 129 163 [6]. NOTE: Requirements pertaining to a UE or an AS implementation or IMS core network requirements that can only be observed at the interface between UE and IMS CN are explicitly not within the scope of the present document. The latter requirements have been dealt with from a UE and conformance perspective in TS 134 229-3 [5].