EN ISO 11126-3-1997
涂料和相关产品应用前钢基底的制备.非金属喷抛清理研磨剂规范.第3部分:铜精炼熔渣

Preparation of steel substrates before application of paints and related products Specifications for non-metallic blast-cleaning abrasives Part 3: Copper refinery slag ISO 11126-3: 1993

EN ISO 11126-3-1997 发布历史

This part of ISO 11126 specifies requirements for copper refinery slag abrasives, as supplied for blast-cleaning processes. It specifies ranges of particle sizes and values for apparent density, Mohs hardness, moisture content, conductivity of aqueous extract and water-soluble chlorides. The requirements specified in this part of ISO 11126 apply to abrasives supplied in the “new” condition only. They do not apply to abrasives either during or after use. Test methods for non-metallic blast-cleaning abrasives are given in the various parts of ISO 11127. NOTE 1 Information on commonly referenced national standards for non-metallic abrasives is given in Annex A. NOTE 2 Although this part of ISO 11126 has been developed specifically to meet requirements for preparation of steelwork, the properties specified will generally be appropriate for use when preparing other material surfaces, or components, using blast-cleaning techniques. These techniques are described in ISO 8504-2:1992, Preparation of steel substrates before application of paints and related products — Surface preparation methods — Part 2: Abrasive blast-cleaning.

EN ISO 11126-3-1997由欧洲标准化委员会 IX-CEN 发布于 1997-07-01。

EN ISO 11126-3-1997 在中国标准分类中归属于: A29 材料防护，在国际标准分类中归属于: 87.020 涂料涂覆工艺。

EN ISO 11126-3-1997 发布之时，引用了标准

• ISO 11127-1-1993 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的试验方法 第1部分:抽样
• ISO 11127-2-1993 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的试验方法 第2部分:颗粒尺寸分布的测定
• ISO 11127-3-1993 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的试验方法 第3部分:表观密度测定
• ISO 11127-4-1993 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的试验方法 第4部分:通过玻璃载片试验评定硬度
• ISO 11127-5-1993 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的试验方法 第5部分:含水量测定
• ISO 11127-6-1993 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的试验方法 第6部分:通过测量电导率测定水溶性杂质
• ISO 11127-7-1993 涂装油漆和有关产品前钢材预处理 非金属喷沙清理磨料的试验方法 第7部分:水溶性氯化物的测定

EN ISO 11126-3-1997的历代版本如下：

• 1997年07月01日 EN ISO 11126-3-1997 涂料和相关产品应用前钢基底的制备.非金属喷抛清理研磨剂规范.第3部分:铜精炼熔渣
• 2018年10月01日 EN ISO 11126-3-2018

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 EN ISO 11126-3-1997 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

EN ISO 11126-3-1997

发布日期

1997年07月01日

实施日期

废止日期

无

中国标准分类号

A29

国际标准分类号

25.220.10;87.020

发布单位

IX-CEN

引用标准

ISO 11127-1-1993 ISO 11127-2-1993 ISO 11127-3-1993 ISO 11127-4-1993 ISO 11127-5-1993 ISO 11127-6-1993 ISO 11127-7-1993

适用范围

This part of ISO 11126 specifies requirements for copper refinery slag abrasives, as supplied for blast-cleaning processes. It specifies ranges of particle sizes and values for apparent density, Mohs hardness, moisture content, conductivity of aqueous extract and water-soluble chlorides. The requirements specified in this part of ISO 11126 apply to abrasives supplied in the “new” condition only. They do not apply to abrasives either during or after use. Test methods for non-metallic blast-cleaning abrasives are given in the various parts of ISO 11127. NOTE 1 Information on commonly referenced national standards for non-metallic abrasives is given in Annex A. NOTE 2 Although this part of ISO 11126 has been developed specifically to meet requirements for preparation of steelwork, the properties specified will generally be appropriate for use when preparing other material surfaces, or components, using blast-cleaning techniques. These techniques are described in ISO 8504-2:1992, Preparation of steel substrates before application of paints and related products — Surface preparation methods — Part 2: Abrasive blast-cleaning.

EN ISO 11126-3-1997系列标准

谁引用了EN ISO 11126-3-1997 更多引用