DIN EN ISO 15614-7-2007
金属材料焊接程序的规范和鉴定.焊接程序试验.第7部分:覆盖焊接(ISO 15614-7:2007)

Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 7: Overlay welding (ISO 15614-7:2007); English version of DIN EN ISO 15614-7:2007-09

DIN EN ISO 15614-7-2007 发布历史

This part of ISO 15614 specifies how a preliminary welding procedure specification for overlay welding is qualified by welding procedure tests. This part of ISO 15614 defines the conditions for carrying out welding procedure tests and the range of qualification for welding procedures for all practical welding operations within the range of variables listed in Clause 8. Additional tests may be required by application standards. This part of ISO 15614 applies to all welding processes suitable for overlay welding. This part of ISO 15614 is applicable to all new welding procedures. However, it does not invalidate previous welding procedure tests made to former national standards or specifications. Where additional tests are carried out to make the qualification technically equivalent, they are only done on a test piece made in accordance with this part of ISO 15614. This part of ISO 15614 does not apply to overlay welding where cracks are intentionally produced (e.g. special hardfacing applications).

DIN EN ISO 15614-7-2007由德国标准化学会 DE-DIN 发布于 2007-09。

DIN EN ISO 15614-7-2007 在中国标准分类中归属于: J33 焊接与切割，在国际标准分类中归属于: 25.160.10 焊接工艺。

DIN EN ISO 15614-7-2007 发布之时，引用了标准

• ISO 15609-1 金属材料焊接工艺规范和鉴定焊接工艺规范第1部分:电弧焊接*， 2019-08-16 更新
• ISO 15609-2 金属材料焊接程序的规范和资格 - 焊接程序规范 - 第2部分:气焊*， 2019-08-16 更新
• ISO 15609-3 金属材料的焊接程序规范和鉴定.焊接程序规范.第3部分:电子束焊
• ISO 15609-4 金属材料的焊接工艺规范和评定.焊接程序规范.第4部分:激光束焊接*， 2009-05-01 更新
• ISO 15613 金属材料的焊接程序规范和鉴定.基于预生产焊接试验的鉴定
• ISO 15614-1 金属材料焊接工艺的规范和评定.焊接工艺试验.第1部分:钢的电弧焊和气焊以及镍和镍合金的电弧焊.修改件1*， 2019-07-09 更新
• ISO 17640 *， 2018-09-30 更新
• ISO 17637 焊接无损检测. 熔焊连接的目视检验
• ISO 17639 金属材料焊缝的破坏性试验.焊缝的宏观和微观检验*， 2022-02-07 更新
• ISO/TR 25901 焊接和相关工艺 - 词汇 - 第4部分:电弧焊接*， 2016-03-17 更新
• ISO 3452 无损检测——渗透检测第6部分:低于10℃的渗透检测*， 2008-11-20 更新
• ISO 5173 金属材料焊缝的破坏性试验.弯曲试验.修改件1*， 2011-10-25 更新
• ISO 6947 焊接 - 工作位置 - 坡度和旋转角度的定义*， 2019-10-12 更新
• ISO 9015-1 金属材料焊接的破坏性试验 硬度试验 第1部分：弧焊接头的硬度试验
• ISO 14174 焊接耗材 - 用于埋弧焊和电焊焊接的焊剂 - 分类*， 2019-04-09 更新
• ISO 14175 焊接消耗品.熔焊及相关工艺用气体和气体混合物*， 2008-03-01 更新

* 在 DIN EN ISO 15614-7-2007 发布之后有更新，请注意新发布标准的变化。

DIN EN ISO 15614-7-2007的历代版本如下：

• 2007年09月 DIN EN ISO 15614-7-2007 金属材料焊接程序的规范和鉴定.焊接程序试验.第7部分:覆盖焊接(ISO 15614-7:2007)
• 2017年03月 DIN EN ISO 15614-7-2017 金属材料焊接程序的规范和鉴定.焊接程序试验.第7部分:覆盖焊接(ISO 15614-7-2016);德文版本EN ISO 15614-7-2016

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 DIN EN ISO 15614-7-2007 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

DIN EN ISO 15614-7-2007

发布日期

2007年09月

实施日期

废止日期

无

中国标准分类号

J33

国际标准分类号

25.160.10

发布单位

DE-DIN

引用标准

ISO /TR 15608 ISO 15609-1 ISO 15609-2 ISO 15609-3 ISO 15609-4 ISO 15613 ISO 15614-1 ISO 17640 ISO 17637 ISO 17639 ISO/TR 25901 ISO 3452 ISO 5173 ISO 6947 ISO 9015-1 ISO 14174 ISO 14175

代替标准

DIN EN ISO 15614-7-2017

适用范围

This part of ISO 15614 specifies how a preliminary welding procedure specification for overlay welding is qualified by welding procedure tests. This part of ISO 15614 defines the conditions for carrying out welding procedure tests and the range of qualification for welding procedures for all practical welding operations within the range of variables listed in Clause 8. Additional tests may be required by application standards. This part of ISO 15614 applies to all welding processes suitable for overlay welding. This part of ISO 15614 is applicable to all new welding procedures. However, it does not invalidate previous welding procedure tests made to former national standards or specifications. Where additional tests are carried out to make the qualification technically equivalent, they are only done on a test piece made in accordance with this part of ISO 15614. This part of ISO 15614 does not apply to overlay welding where cracks are intentionally produced (e.g. special hardfacing applications).

DIN EN ISO 15614-7-2007系列标准

谁引用了DIN EN ISO 15614-7-2007 更多引用