ANSI Z245.41-2008
废弃物和可回收材料用设备技术和操作.混合的可回收材料的处理设备.安全要求

Equipment Technology and Operations for Wastes and Recyclable Materials Facilities for the Processing of Commingled Recyclable Materials — Safety Requirements

ANSI Z245.41-2008 发布历史

This American National Standard is applicable to all persons who design, manufacture, assemble, modify,operate, clean, maintain, service, or repair material recovery facilities (MRFs) which engage in receiving,storing, and processing commingled recyclable materials which have been previously collected orotherwise diverted from the solid waste stream. This standard does not apply to scrap processingfacilities (North American Industry Classification system code number 42193, formerly Standard IndustrialClassification number 5093), unless the scrap processing facility operates a MRF, which MRF would thenbe subject to this standard.The safety requirements are divided into 7 sections and are applicable as described in 1.1.1 through1.1.3.1.1.1 Sections 1 through 3 provide general information and definitions and shall apply to all materialrecovery facilities (MRFs) covered by this standard.1.1.2 Sections 4 through 6 provide for physical plant, processing machinery and mobile equipmentrequirements that shall apply to both new and existing MRFs.1.1.3 Section 7 provides for safety programs and safety requirements that shall apply to both new andexisting MRFs.

ANSI Z245.41-2008由美国国家标准学会 US-ANSI 发布于 2008-02-27。

ANSI Z245.41-2008 在中国标准分类中归属于: J88 环境保护设备，在国际标准分类中归属于: 13.030.40 废物处置和处理设备和装置,13.030.50 回收。

ANSI Z245.41-2008 发布之时，引用了标准

• ANSI Z245.1-2008 废弃物和可回收材料用设备技术和操作.移动式废弃物和可回收材料的回收、运输和压实设备.安全要求
• ANSI Z245.2-2008 废弃物和可回收材料用设备技术和操作.固定压实机.安装、维护和操作的安全要求
• ANSI Z245.21-2008 废弃物和可回收材料用设备技术和操作.固定压实机.安全要求
• ANSI Z245.5-2008 废弃物和可再循环材料用设备技术和操作.打包设备.安装、维护和操作用安全要求
• ANSI Z245.51-2008 废弃物和可再循环材料用设备技术和操作.废碴压块设备.安全要求
• ANSI Z245.30-2008 废弃物和可回收材料用设备技术和运行的美国国家标准.废弃物容器.安全要求

ANSI Z245.41-2008的历代版本如下：

• 1997年 ANSI Z245.41-1997 废物和可循环材料的设备技术和运行.混合可再循环材料的加工设施.安全要求
• 2008年02月27日 ANSI Z245.41-2008 废弃物和可回收材料用设备技术和操作.混合的可回收材料的处理设备.安全要求

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 ANSI Z245.41-2008 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

ANSI Z245.41-2008

发布日期

2008年02月27日

实施日期

废止日期

无

中国标准分类号

J88

国际标准分类号

13.030.40;13.030.50

发布单位

US-ANSI

引用标准

ANSI A1264.1(R2002) ANSI/ASME B20.1-2001 ANSI/ASME B56.1-2000 ANSI/ASME B56.1a-2001 ANSI Z41-1999 ANSI/ASSE Z87.1-2003 ANSI Z89.1-2003 ANSI Z245.1-2008 ANSI Z245.2-2008 ANSI Z245.21-2008 ANSI Z245.5-2008 ANSI Z245.51-2008 ANSI Z245.30-2008 ANSI Z245.60-20

代替标准

ANSI Z245.41-2015

适用范围

This American National Standard is applicable to all persons who design, manufacture, assemble, modify,operate, clean, maintain, service, or repair material recovery facilities (MRFs) which engage in receiving,storing, and processing commingled recyclable materials which have been previously collected orotherwise diverted from the solid waste stream. This standard does not apply to scrap processingfacilities (North American Industry Classification system code number 42193, formerly Standard IndustrialClassification number 5093), unless the scrap processing facility operates a MRF, which MRF would thenbe subject to this standard.The safety requirements are divided into 7 sections and are applicable as described in 1.1.1 through1.1.3.1.1.1 Sections 1 through 3 provide general information and definitions and shall apply to all materialrecovery facilities (MRFs) covered by this standard.1.1.2 Sections 4 through 6 provide for physical plant, processing machinery and mobile equipmentrequirements that shall apply to both new and existing MRFs.1.1.3 Section 7 provides for safety programs and safety requirements that shall apply to both new andexisting MRFs.

ANSI Z245.41-2008 中可能用到的仪器设备