DIN EN 1439-2008
液化石油气(LPG)设备和附件.LPG钢瓶罐装前、罐装中以及灌装后的检验程序

LPG equipment and accessories - Procedure for checking LPG cylinders before, during and after filling; English version of DIN EN 1439:2008-06

DIN EN 1439-2008 发布历史

This European Standard specifies the procedures to be adopted when checking transportable refillable LPG cylinders before, during and after filling. This European Standard applies to transportable refillable LPG cylinders of water capacity from 0,5 I up to and including 150 I. This European Standard does not apply to cylinders permanently installed in vehicles, or to plant and filling equipment. This standard is applicable to the following: -- welded and brazed steel LPG cylinders with a specified minimum wall thickness (see EN 1442 and EN 12807 or an equivalent standard); -- welded steel LPG cylinders without specified minimum wall thickness (see EN 14140 or an equivalent standard); -- welded aluminium LPG cylinders (see EN 13110 or an equivalent standard); -- composite LPG cylinders (see EN 14427 or an equivalent standard). Specific requirements for different types of cylinders are detailed in Annex A, Annex B, Annex C and Annex D. NOTE Rejection limits for a particular type of protected cylinder are given in Annex G. This standard is intended to be applied to cylinders complying with RID/ADR (including pi marked cylinders) and also to existing non RID/ADR cylinder populations.

DIN EN 1439-2008由德国标准化学会 DE-DIN 发布于 2008-06。

DIN EN 1439-2008 在中国标准分类中归属于: E98 油、气集输设备，在国际标准分类中归属于: 23.020.30 压力容器、气瓶。

DIN EN 1439-2008 发布之时，引用了标准

• EN 1440 液化石油气设备及配件.传统可移动可再装的钎焊焊接液化石油气（LPG）钢瓶.检验周期*， 2016-02-01 更新
• EN 10028-7 压力容器钢板.第7部分:不锈钢*， 2016-07-01 更新
• EN 12816 液化石油气(LPG)设备和配件.可运输可再充填钢,铝液化石油气(LPG)瓶*， 2022-07-21 更新
• EN 13952 *， 2017-06-01 更新
• EN 14140 液化石油气(LPG)设备及附件.液化气(LPG)用便携可再装式焊接钢气缸.替代设计及建造*， 2014-12-01 更新
• EN 14427-2004 液化石油气(LPG)用可移动的可再充填式全包装复合气瓶.设计和建造.包含修改件A1-2005
• EN 14894 *， 2013-04-01 更新

* 在 DIN EN 1439-2008 发布之后有更新，请注意新发布标准的变化。

DIN EN 1439-2008的历代版本如下：

• 2005年12月 DIN EN 1439-2005 LPG设备和组件.可运输可再灌装的焊接和钎焊液化气(LPG)钢瓶.灌装前、灌装中和灌装后的检测程序
• 2008年06月 DIN EN 1439-2008 液化石油气(LPG)设备和附件.LPG钢瓶罐装前、罐装中以及灌装后的检验程序

DIN EN 1439-2008 液化石油气(LPG)设备和附件.LPG钢瓶罐装前、罐装中以及灌装后的检验程序 由 DIN EN 14763-2005 变更而来。

DIN EN 1439-2008 液化石油气(LPG)设备和附件.LPG钢瓶罐装前、罐装中以及灌装后的检验程序 由 DIN EN 14794-2005 变更而来。

DIN EN 1439-2008 液化石油气(LPG)设备和附件.LPG钢瓶罐装前、罐装中以及灌装后的检验程序 由 DIN EN 14913-2006 变更而来。

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 DIN EN 1439-2008 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

DIN EN 1439-2008

发布日期

2008年06月

实施日期

废止日期

无

中国标准分类号

E98

国际标准分类号

23.020.30

发布单位

DE-DIN

引用标准

EN 1440 EN 10028-7 EN 12816 EN 13952 EN 14140 EN 14427-2004 EN 14894

被代替标准

DIN EN 1439-2005 DIN EN 1439-2007 DIN EN 14763-2005 DIN EN 14794-2005 DIN EN 14913-2006

适用范围

This European Standard specifies the procedures to be adopted when checking transportable refillable LPG cylinders before, during and after filling. This European Standard applies to transportable refillable LPG cylinders of water capacity from 0,5 I up to and including 150 I. This European Standard does not apply to cylinders permanently installed in vehicles, or to plant and filling equipment. This standard is applicable to the following: -- welded and brazed steel LPG cylinders with a specified minimum wall thickness (see EN 1442 and EN 12807 or an equivalent standard); -- welded steel LPG cylinders without specified minimum wall thickness (see EN 14140 or an equivalent standard); -- welded aluminium LPG cylinders (see EN 13110 or an equivalent standard); -- composite LPG cylinders (see EN 14427 or an equivalent standard). Specific requirements for different types of cylinders are detailed in Annex A, Annex B, Annex C and Annex D. NOTE Rejection limits for a particular type of protected cylinder are given in Annex G. This standard is intended to be applied to cylinders complying with RID/ADR (including pi marked cylinders) and also to existing non RID/ADR cylinder populations.

DIN EN 1439-2008 中可能用到的仪器设备