DIN EN 15000-2009
工业卡车的安全性 自驱动变量延伸卡车 纵向载荷力矩指示器和纵向载荷力矩限制器用规范、性能和试验要求

Safety of industrial trucks - Self propelled variable reach trucks - Specification, performance and test requirements for longitudinal load moment indicators and longitudinal load moment limiters; English version of DIN EN 15000:2009-06

DIN EN 15000-2009 发布历史

This European Standard specifies the technical requirements, verification and test procedure for the longitudinal load moment indicators (LLMI) and longitudinal load moment control (LLMC) systems operating in the forward direction for self propelled variable reach trucks covered by EN 1459. This European Standard completes the requirements of Clause 5.8.4 Longitudinal stability of EN 1459:1998 The LLMI has been designated by the words longitudinal safety warning devices in EN 1459 This European Standard covers LLMI and LLMC systems for stationary trucks performing loading or placing functions on consolidated, stable and level ground. This European Standard does not cover the risk due to lateral instability, or instability due to the travelling of the truck. The LLMI and LLMC are not intended for warning of the overturning risk whilst the truck is travelling. NOTE Acknowledging that, at the time of publication, the requirements included in this European Standard do not represent the state of the art, a transition period of 24 months is permitted after the date of publication, such that manufacturers can develop their products sufficiently to meet the requirements of this European Standard.

DIN EN 15000-2009由德国标准化学会 DE-DIN 发布于 2009-06，并于 2009-06-01 实施。

DIN EN 15000-2009 在中国标准分类中归属于: T59 其他专用汽车，在国际标准分类中归属于: 53.060 工业车辆。

DIN EN 15000-2009 发布之时，引用了标准

• EN 1175-1-1998 工业货车安全.电气要求.第1部分:电池驱动货车的一般要求
• EN 1175-2-1998 工业货车安全.电气安全.第2部分:内燃机驱动货车的一般要求
• EN 1175-3-1998 工业货车安全.电气安全.第3部分:内燃机驱动货车电力传输系统的特殊要求
• EN 1459-1998 工业用卡车的安全.自推式可变延伸卡车.包含修改件A2-2010
• EN 12895-2000 工业货车.电磁兼容性
• EN 60529-1991 隔离罩(IP规范)提供的保护等级规范(IEC 529-89)
• EN ISO 13849-1-2006 
• EN ISO 12100-1-2003 机械安全.设计用的基本概念,一般原则.第1部分:基本术语,方法论.包含修改件A1-2009［代替:CEN EN 292-1］*， 2022-07-22 更新
• EN ISO 12100-2-2003 械安全.基本概念和设计通则.第2部分:技术原理.包含修改件A1-2009［代替:CEN EN 292-2］*， 2022-07-22 更新
• EN ISO 13849-1-2008 
• ISO 3287-1978 动力工业卡车.控制符号

* 在 DIN EN 15000-2009 发布之后有更新，请注意新发布标准的变化。

DIN EN 15000-2009的历代版本如下：

• 2009年06月 DIN EN 15000-2009 工业卡车的安全性 自驱动变量延伸卡车 纵向载荷力矩指示器和纵向载荷力矩限制器用规范、性能和试验要求

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 DIN EN 15000-2009 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

DIN EN 15000-2009

发布日期

2009年06月

实施日期

2009年06月01日

废止日期

无

中国标准分类号

T59

国际标准分类号

53.060

发布单位

DE-DIN

引用标准

EN 1175-1-1998 EN 1175-2-1998 EN 1175-3-1998 EN 1459-1998 EN 12895-2000 EN 60529-1991 EN ISO 13849-1-2006 EN ISO 12100-1-2003 EN ISO 12100-2-2003 EN ISO 13849-1-2008 EN ISO 14121-1-2007 ISO 3287-1978

被代替标准

DIN EN 15000-2006

适用范围

This European Standard specifies the technical requirements, verification and test procedure for the longitudinal load moment indicators (LLMI) and longitudinal load moment control (LLMC) systems operating in the forward direction for self propelled variable reach trucks covered by EN 1459. This European Standard completes the requirements of Clause 5.8.4 Longitudinal stability of EN 1459:1998 The LLMI has been designated by the words longitudinal safety warning devices in EN 1459 This European Standard covers LLMI and LLMC systems for stationary trucks performing loading or placing functions on consolidated, stable and level ground. This European Standard does not cover the risk due to lateral instability, or instability due to the travelling of the truck. The LLMI and LLMC are not intended for warning of the overturning risk whilst the truck is travelling. NOTE Acknowledging that, at the time of publication, the requirements included in this European Standard do not represent the state of the art, a transition period of 24 months is permitted after the date of publication, such that manufacturers can develop their products sufficiently to meet the requirements of this European Standard.