BS EN 50131-3:2009
报警系统.侵入和拦截系统.控制和指示设备

Alarm systems. Intrusion and hold-up systems. Control and indicating equipment

BS EN 50131-3:2009 发布历史

BS EN 50131-3:2009由英国标准学会 GB-BSI 发布于 2009-04-30，并于 2009-04-30 实施。

BS EN 50131-3:2009 在中国标准分类中归属于: A91 安全防范报警系统，在国际标准分类中归属于: 13.310 犯罪行为防范。

BS EN 50131-3:2009 报警系统.侵入和拦截系统.控制和指示设备的最新版本是哪一版？

最新版本是 BS EN 50131-3:2009 。

BS EN 50131-3:2009 发布之时，引用了标准

• EN 50130-4:1995 警报系统.第4部分:防火,防入侵,拦截,CCTV,访问控制和公共警报系统部件的抗干扰要求
• EN 50130-5:1998 警报系统.第5部分:环境试验方法
• EN 50131-1:2006 报警系统.侵入和拦劫系统.第1部分:系统要求;包含修改件A1-2009*， 2024-04-26 更新
• EN 50131-5-3:2005 报警系统.入侵探测系统.第5-3部分:使用射频技术的干扰报警仪器的要求;合并勘误表A1-2008
• EN 50131-6:2008 报警系统.侵入和拦劫系统.第6部分:电源
• EN 60068-1:1994 环境试验.第1部分:总则和指南(IEC 68-1-1988+勘误表 1988+A1-1992)
• EN 60068-2-75:1997 环境试验.第2部分:试验.试验Eh:锤击试验;替代 EN 60068-2-62-1995和EN 60068-2-63-1994;IEC 60068-2-75-1997
• EN 60529 隔离罩(IP规范)提供的保护等级规范(IEC 529-89)
• EN 62262 抗外部机械冲击的电气设备外壳的防护等级(IK码)

* 在 BS EN 50131-3:2009 发布之后有更新，请注意新发布标准的变化。

BS EN 50131-3:2009的历代版本如下：

• 2009年 BS EN 50131-3:2009 报警系统.侵入和拦截系统.控制和指示设备
• 2003年 BS DD CLC/TS 50131-3:2003 报警系统.入侵系统.控制及指示设备

This standard specifies the requirements, performance criteria and testing procedures for control and indicating equipment (CIE) intended for use in intrusion and hold-up alarm systems (I&HAS) installed in buildings. This document also applies to CIE to be used in IAS or HAS. The CIE may incorporate processing functions of other I&HAS components or its processing requirements may be distributed among such components. This standard specifies the requirements for CIE installed in buildings using specific or non-specific wired interconnections or wire-free interconnections. These requirements also apply to ACE that are installed inside or outside of the supervised premises and mounted in indoor or outdoor environments. Where CIE shares means of detection, interconnection, control, communication, processing and/or power supplies with other applications, these requirements apply to I&HAS functions only. This standard specifies performance requirements for CIE at each of the four security grades identified in the European Standard EN 50131-1, “Alarm Systems – Intrusion and hold-up systems – System requirements”. Requirements are also specified for four environmental classes covering applications for indoor and outdoor locations. This standard includes mandatory functions, which shall be provided on all CIE for the appropriate security grade, as well as optional functions that may additionally be provided. This standard does not deal with requirements for compliance with EU regulatory Directives, such as the EMC Directive, Low Voltage Directive, etc. except in that it specifies the equipment operating conditions for EMC susceptibility testing as required by EN 50130-4. NOTE In this standard reference to the term “I&HAS” is used throughout, except where there is specific need to differentiate between the IAS and HAS portions of a system. The term is intended to include IAS and HAS when such systems are installed separately.

标准号

BS EN 50131-3:2009

发布

2009年

发布单位

英国标准学会

当前最新

BS EN 50131-3:2009

 

 

引用标准

EN 50130-4:1995 EN 50130-5:1998 EN 50131-1-2006/A1:2009 EN 50131-1:2006 EN 50131-5-3:2005 EN 50131-6:2008 EN 60068-1:1994 EN 60068-2-75:1997 EN 60529 EN 62262

被代替标准

08/30177443 DC-2008 BS DD CLC/TS 50131-3:2003

BS EN 50131-3:2009相似标准

推荐