IEEE C 37.41-2008
高压(>1000 V)熔断器,熔断器和熔断,分配闭合式单极空气开关,熔断器断开开关以及与这些设备配套使用的熔断器连线和附件的设计试验

Design Tests for High-Voltage (>1000 V) Fuses, Fuse and Disconnecting Cutouts, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Fuse Links and Accessories Used with These Devices

IEEE C 37.41-2008 发布历史

This standard specifies design test requirements for high-voltage (above 1000 V) fuses, distribution enclosed single-pole air switches, disconnecting cutouts, fuse disconnecting switches, and accessories for use on ac power and distribution systems. Devices with rated maximum voltages to 170 kV are covered. The devices to which this standard applies are as follows: a) Distribution and power class expulsion type fuses b) Distribution and power class current-limiting type fuses c) Distribution and power class fuse disconnecting switches d) Item a) through item c) used in fuse enclosure packages e) Fuse supports of the type intended for use with distribution and power class fuses, and fuse disconnecting switches f) Fuse and disconnecting cutouts g) Disconnecting devices created by the use of a removable switch blade in a distribution or power class fuse support h) Distribution class enclosed single-pole air switches i) Distribution class and power class expulsion, current-limiting, and combination types of external capacitor fuses used with a capacitor unit, groups of units, or capacitor banks j) Backup current-limiting fuses (“motor-starter fuses”) used in conjunction with high-voltage Class E2 motor starters (see ANSI/UL 347-2000 [B1])1 k) Fuse links when used exclusively with distribution class and power class fuses, and distribution class and power class fuse disconnecting switches l) Item a) through item d) and item f) through item i) having integral load-break means This standard specifies the minimum testing requirements for fuses and related devices. Such standardization is needed to ensure uniform minimum product testing for devices within the document scope. Test areas covered are based on historical experience.

IEEE C 37.41-2008由美国电气电子工程师学会 US-IEEE 发布于 2008-11-10。

IEEE C 37.41-2008 在中国标准分类中归属于: K31 低压配电电器。

IEEE C 37.41-2008 发布之时，引用了标准

• ANSI C37.46 电力熔断器和熔丝切断开关规范*， 2022-07-23 更新
• ANSI C37.47 配电熔断式断路开关、熔断支座和限流熔断器的规范
• IEC 60282-1 高压保险丝 - 第1部分:限流保险丝*， 2020-04-14 更新
• IEC 60282-2 高压熔断器.第2部分:冲击式熔断器
• IEEE 4-1995 高压测试技术
• IEEE C37.20.3 金属封装中断器开关装置的IEEE标准(1 kV-38 kV)*， 2022-07-23 更新
• IEEE C37.40 
• IEEE C37.43 并联电容保护用额定电压为1 kV～38 kV的高压喷溅、限流和组合型配电盒功率等级外部熔丝
• IEEE C37.45 高压(>1000 V)封闭式单极空气配电开关设计试验规范*， 2016-05-15 更新
• IEEE C37.48 高压熔断器、封闭式单极空气配电开关、熔断器切断开关和附件的应用、操作和维护指南

* 在 IEEE C 37.41-2008 发布之后有更新，请注意新发布标准的变化。

IEEE C 37.41-2008的历代版本如下：

• 2008年11月10日 IEEE C 37.41-2008 高压(>1000 V)熔断器,熔断器和熔断,分配闭合式单极空气开关,熔断器断开开关以及与这些设备配套使用的熔断器连线和附件的设计试验

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 IEEE C 37.41-2008 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

IEEE C 37.41-2008

发布日期

2008年11月10日

实施日期

废止日期

无

中国标准分类号

K31

发布单位

US-IEEE

引用标准

ANSI C37.42 ANSI C37.46 ANSI C37.47 ANSI C63.2-1987 IEC 60282-1 IEC 60282-2 IEEE 4-1995 IEEE C37.20.3 IEEE C37.40 IEEE C37.43 IEEE C37.45 IEEE C37.48

被代替标准

IEEE C 37.41-2000

适用范围

This standard specifies design test requirements for high-voltage (above 1000 V) fuses, distribution enclosed single-pole air switches, disconnecting cutouts, fuse disconnecting switches, and accessories for use on ac power and distribution systems. Devices with rated maximum voltages to 170 kV are covered. The devices to which this standard applies are as follows: a) Distribution and power class expulsion type fuses b) Distribution and power class current-limiting type fuses c) Distribution and power class fuse disconnecting switches d) Item a) through item c) used in fuse enclosure packages e) Fuse supports of the type intended for use with distribution and power class fuses, and fuse disconnecting switches f) Fuse and disconnecting cutouts g) Disconnecting devices created by the use of a removable switch blade in a distribution or power class fuse support h) Distribution class enclosed single-pole air switches i) Distribution class and power class expulsion, current-limiting, and combination types of external capacitor fuses used with a capacitor unit, groups of units, or capacitor banks j) Backup current-limiting fuses (“motor-starter fuses”) used in conjunction with high-voltage Class E2 motor starters (see ANSI/UL 347-2000 [B1])1 k) Fuse links when used exclusively with distribution class and power class fuses, and distribution class and power class fuse disconnecting switches l) Item a) through item d) and item f) through item i) having integral load-break means This standard specifies the minimum testing requirements for fuses and related devices. Such standardization is needed to ensure uniform minimum product testing for devices within the document scope. Test areas covered are based on historical experience.

IEEE C 37.41-2008 中可能用到的仪器设备