ISO 22968-2010
强制通风油燃器
Forced draught oil burners
ISO 22968-2010 发布历史
This International Standard specifies the terminology, test procedures and general requirements for the construction and operation of automatic forced draught oil burners supplied with a fuel having a viscosity at the burner inlet of 1,6 mm2/s (cSt) to 6 mm2/s (cSt) at 20 °C or higher, boiling petroleum in accordance with ISO 8217-based first raffinates, and the provision of related control and safety devices. It is applicable to the following: a) automatic oil burners (hereinafter called “burners”) fitted with a combustion air fan and equipped as described in Clause 5, intended for use in appliances of different types and operated with fuel oils; b) single burners with a single combustion chamber, for which, where such burners are fitted to a single appliance, the requirements of the relevant appliance standard also apply; c) single-fuel and dual-fuel burners when operating only on oil; d) the oil function of dual-fuel burners designed to operate simultaneously on gaseous and liquid fuels, which, for the former, the requirements of ISO 22967 also apply. It is not applicable to burners used in direct fired processes either with defined combustion chamber applications or where the combustion chamber wall surface temperature is greater than 750 °C or the heat-transfer medium temperature is greater than 500 °C.
ISO 22968-2010由国际标准化组织 IX-ISO 发布于 2010-11，并于 2010-11-01 实施。
ISO 22968-2010 在中国标准分类中归属于: J98 锅炉及其辅助设备，在国际标准分类中归属于: 27.060.10 液体和固体燃料燃烧器。
ISO 22968-2010 发布之时，引用了标准
- ISO 7-1 用螺纹密封的管螺纹 第1部分:尺寸、公差与标记 技术勘误表
- ISO 228-1 非螺纹密封的管螺纹 第1部分:标记、尺寸和公差
- ISO 1129 锅炉、过热器和热交换器用钢管 尺寸、公差和单位常用重量
- ISO 3183 石油和天然气工业.管道用钢管.交货技术条件.第3部分:C级要求的管道
- ISO 6806 油燃烧器用软管和软管组件.规范*， 2017-06-01 更新
- ISO 7005 金属法兰第3部分:铜合金和复合法兰
- ISO 8217 石油产品.燃料(F级).船用燃料规格*， 2017-03-01 更新
- ISO 9329-1 压力用途的无缝钢管 交货技术条件 第1部分:规定室温性能的非合金钢
- ISO 9330-1 压力用途的焊接钢管 交货技术条件 第1部分:规定室温性能的非合金钢管
- ISO/IEC 17025 测试和校准实验室能力的一般要求*， 2017-11-29 更新
- ISO 22967 强制通风煤气炉
- ISO 23550 燃气和/或燃油燃烧器和电器的安全性和控制设备.一般要求
- ISO 23552-1 除了日本的特定区域要求之外
- ISO 23553-1 燃油燃烧器和燃油器具的安全和控制装置.特殊要求.第1部分:自动和半自动阀门*， 2022-02-15 更新
- IEC 60204-1 IEC 60204-1-2021
- IEC 60335-1-2001 家用和类似用途 安全 第1部分：一般要求
- IEC 60335-2-102-2004 家用和类似用途电器的安全.第2-102部分:有电连接的气体、油和固体燃烧燃烧设备的特殊要求
- IEC 60529 IEC 60529-2013
- IEC 60730-2-5-2004 Automatic Electrical Controls for Household and Similar Use - Part 2-5: Particular Requirements for Automatic Electrical Burner Control Systems (Edition 3.1: Consolidated Reprint: 9/2004)
- IEC 60747-5-2 修改件1.分立半导体器件和集成电路.第5-2部分:光电子器件.基本额定值和特性
- IEC 60947-5-1 低压开关设备和控制设备第5-1部分:控制电路装置和开关元件机电控制电路装置*， 2016-05-25 更新
* 在 ISO 22968-2010 发布之后有更新，请注意新发布标准的变化。
ISO 22968-2010的历代版本如下：
- 2010年11月 ISO 22968-2010 强制通风油燃器
- 标准号
- ISO 22968-2010
- 发布日期
- 2010年11月
- 实施日期
- 2010年11月01日
- 废止日期
- 无
- 中国标准分类号
- J98
- 国际标准分类号
- 27.060.10
- 发布单位
- 国际标准化组织
- 引用标准
- ISO 7-1 ISO 228-1 ISO 1129 ISO 3183 ISO 6806 ISO 7005 ISO 8217 ISO 9329-1 ISO 9330-1 ISO/IEC 17025 ISO 22967 ISO 23550 ISO 23552-1 ISO 23553-1 IEC 60204-1 IEC 60335-1-2001 IEC 60335-2-102-2004 IEC 60529 IEC 60730-2-5-2004 IEC 60747-5-2 IEC 60947-5-1 IEC 6
- 被代替标准
- ISO/FDIS 22968-2010
- 适用范围
- This International Standard specifies the terminology, test procedures and general requirements for the construction and operation of automatic forced draught oil burners supplied with a fuel having a viscosity at the burner inlet of 1,6 mm2/s (cSt) to 6 mm2/s (cSt) at 20 °C or higher, boiling petroleum in accordance with ISO 8217-based first raffinates, and the provision of related control and safety devices. It is applicable to the following: a) automatic oil burners (hereinafter called “burners”) fitted with a combustion air fan and equipped as described in Clause 5, intended for use in appliances of different types and operated with fuel oils; b) single burners with a single combustion chamber, for which, where such burners are fitted to a single appliance, the requirements of the relevant appliance standard also apply; c) single-fuel and dual-fuel burners when operating only on oil; d) the oil function of dual-fuel burners designed to operate simultaneously on gaseous and liquid fuels, which, for the former, the requirements of ISO 22967 also apply. It is not applicable to burners used in direct fired processes either with defined combustion chamber applications or where the combustion chamber wall surface temperature is greater than 750 °C or the heat-transfer medium temperature is greater than 500 °C.