DIN EN ISO 10893-10-2011
钢管无损检测.第10部分:纵向和/或横向缺陷检测用无缝和焊接(埋弧焊除外)钢管的自动全外围超声波探伤法(ISO 10893-10-2011).德文版本EN ISO 10893-10-2011

Non-destructive testing of steel tubes - Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections (ISO 10893-10:2011); German v

DIN EN ISO 10893-10-2011 发布历史

This part of ISO 10893 specifies requirements for automated full peripheral ultrasonic shear wave (generated by conventional or phased array technique) testing of seamless and welded (except submerged arc-welded) steel tubes, for the detection of longitudinal and/or transversal imperfections. Unless otherwise specified in the purchase order, the testing method is applied for the detection of predominantly longitudinal imperfections. In the case of testing on longitudinal imperfections, Lamb wave testing may be applied at the discretion of the manufacturer. For seamless tubes, by agreement between purchaser and manufacturer, testing principles of this international standard may be applied to detect imperfections having other orientations. This part of ISO 10893 is applicable to the inspection of tubes with an outside diameter greater than or equal to 10 mm, normally with an outside diameter-to-thickness ratio greater or equal to 5. This part of ISO 10893 can also be applicable to the testing of circular hollow sections.

DIN EN ISO 10893-10-2011由德国标准化学会 DE-DIN 发布于 2011-07。

DIN EN ISO 10893-10-2011 在中国标准分类中归属于: H26 金属无损检验方法，在国际标准分类中归属于: 23.040.10 铁管和钢管,77.040.20 金属材料无损检测。

DIN EN ISO 10893-10-2011 发布之时，引用了标准

• ISO 5577 无损检测. 超声检测. 词汇
• ISO 9712 无损检测.无损检测人员的资格和认证*， 2021-12-21 更新
• ISO 11484 钢产品.无损检测（NDT）人员的雇主资格体系*， 2019-04-01 更新

* 在 DIN EN ISO 10893-10-2011 发布之后有更新，请注意新发布标准的变化。

DIN EN ISO 10893-10-2011的历代版本如下：

• 2011年07月 DIN EN ISO 10893-10-2011 钢管无损检测.第10部分:纵向和/或横向缺陷检测用无缝和焊接(埋弧焊除外)钢管的自动全外围超声波探伤法(ISO 10893-10-2011).德文版本EN ISO 10893-10-2011

DIN EN ISO 10893-10-2011 钢管无损检测.第10部分:纵向和/或横向缺陷检测用无缝和焊接(埋弧焊除外)钢管的自动全外围超声波探伤法(ISO 10893-10-2011).德文版本EN ISO 10893-10-2011 由 DIN EN 10246-7-2005 变更而来。

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 DIN EN ISO 10893-10-2011 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

DIN EN ISO 10893-10-2011

发布日期

2011年07月

实施日期

废止日期

无

中国标准分类号

H26

国际标准分类号

23.040.10;77.040.20

发布单位

德国标准化学会

引用标准

ISO 5577 ISO 9712 ISO 11484

被代替标准

DIN EN 10246-6-2000 DIN EN 10246-7-2005 DIN EN ISO 10893-10-2009

适用范围

This part of ISO 10893 specifies requirements for automated full peripheral ultrasonic shear wave (generated by conventional or phased array technique) testing of seamless and welded (except submerged arc-welded) steel tubes, for the detection of longitudinal and/or transversal imperfections. Unless otherwise specified in the purchase order, the testing method is applied for the detection of predominantly longitudinal imperfections. In the case of testing on longitudinal imperfections, Lamb wave testing may be applied at the discretion of the manufacturer. For seamless tubes, by agreement between purchaser and manufacturer, testing principles of this international standard may be applied to detect imperfections having other orientations. This part of ISO 10893 is applicable to the inspection of tubes with an outside diameter greater than or equal to 10 mm, normally with an outside diameter-to-thickness ratio greater or equal to 5. This part of ISO 10893 can also be applicable to the testing of circular hollow sections.

DIN EN ISO 10893-10-2011相似标准

推荐

DIN EN ISO 10893-10-2011系列标准

DIN EN ISO 10893-10-2011 中可能用到的仪器设备