BS DD CLC/TS 50238-2-2010
轨道交通.全部车辆和火车探测系统间的兼容性.轨道电路的兼容性

Railway applications. Compatibility between rolling stock and train detection systems. Compatibility with track circuits

BS DD CLC/TS 50238-2-2010 发布历史

This Technical Specification defines, for the purpose of ensuring compatibility between rolling stock and track circuits the limits for conducted interference from rolling stock and the measurement method for verifying conformity of rolling stock to these limits. The interference limits are only applicable to interoperable rolling stock which is intended to run on lines exclusively equipped with preferred track circuit listed in this Technical Specification. National Notified Technical Rules are still to be used in all cases, where the line over which the rolling stock is intended to run is equipped with any type of older version or non-preferred track circuits that are not listed in this Technical Specification. However, the rolling stock test methodology (infrastructure conditions, test configurations, operational conditions, etc.) presented in this Technical Specification is also applicable to establish compatibility with non-preferred track circuits. This Technical Specification gives guidance on the derivation of interference current limits specified for rolling stock and defines measurement methods and evaluation criteria. This Technical Specification defines • a set of interference current limits for RST (Rolling Stock) applicable for each of the following types of traction system: - DC (750 V, 1,5 kV and 3 kV); - 16,7 Hz AC; - 50 Hz AC. • methodology for the demonstration of compatibility between rolling stock and track circuits, • measurement method to verify interference current limits and evaluation criteria. NOTE 1 The basic parameters of track circuits associated with the interference current limits for RST are not in the scope of this Technical Specification. NOTE 2 Any phenomena linked to traction power supply and associated protection (over voltage, short-circuit current, under- and over-voltage if regenerative brakes are used) is part of the track circuit design and outside the scope of this Technical Specification.

BS DD CLC/TS 50238-2-2010由英国标准学会 GB-BSI 发布于 2011-03-31，并于 2011-03-31 实施。

BS DD CLC/TS 50238-2-2010 在中国标准分类中归属于: S80 牵引供电综合，在国际标准分类中归属于: 29.280 电力牵引设备,45.060.10 机车。

BS DD CLC/TS 50238-2-2010 发布之时，引用了标准

• EN 50128 *， 2011-06-01 更新
• EN 50129 EN 50129-2018 AC2019
• EN 50163 轨道交通.牵引系统的供电电压;包含修改件A1-2007;合并勘误表2010年5月*， 2022-07-25 更新
• EN 50238 轨道交通.机车车辆和列车检测系统间的兼容性;合并勘误表2010年5月
• EN 50388 铁路设施.电源设备和铁道车辆.实现互操作性的电源(变电站)和铁道车辆间配合的技术标准.*， 2012-03-01 更新
• CLC/TR 50507 轨道交通.欧洲铁路用现有轨道回路的干扰限制

* 在 BS DD CLC/TS 50238-2-2010 发布之后有更新，请注意新发布标准的变化。

BS DD CLC/TS 50238-2-2010的历代版本如下：

• 2011年03月31日 BS DD CLC/TS 50238-2-2010 轨道交通.全部车辆和火车探测系统间的兼容性.轨道电路的兼容性
• 2011年03月31日 BS DD CLC/TS 50238-2-2011 铁路应用设施.全部车辆和火车探测系统间的兼容性.轨道电路的兼容性

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 BS DD CLC/TS 50238-2-2010 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

BS DD CLC/TS 50238-2-2010

发布日期

2011年03月31日

实施日期

2011年03月31日

废止日期

无

中国标准分类号

S80

国际标准分类号

29.280;45.060.10

发布单位

GB-BSI

引用标准

EN/TR 50126 EN 50128 EN 50129 EN 50163 EN 50238 EN 50388 CLC/TR 50507 UIC 550 ENV 13005

适用范围

This Technical Specification defines, for the purpose of ensuring compatibility between rolling stock and track circuits the limits for conducted interference from rolling stock and the measurement method for verifying conformity of rolling stock to these limits. The interference limits are only applicable to interoperable rolling stock which is intended to run on lines exclusively equipped with preferred track circuit listed in this Technical Specification. National Notified Technical Rules are still to be used in all cases, where the line over which the rolling stock is intended to run is equipped with any type of older version or non-preferred track circuits that are not listed in this Technical Specification. However, the rolling stock test methodology (infrastructure conditions, test configurations, operational conditions, etc.) presented in this Technical Specification is also applicable to establish compatibility with non-preferred track circuits. This Technical Specification gives guidance on the derivation of interference current limits specified for rolling stock and defines measurement methods and evaluation criteria. This Technical Specification defines • a set of interference current limits for RST (Rolling Stock) applicable for each of the following types of traction system: - DC (750 V, 1,5 kV and 3 kV); - 16,7 Hz AC; - 50 Hz AC. • methodology for the demonstration of compatibility between rolling stock and track circuits, • measurement method to verify interference current limits and evaluation criteria. NOTE 1 The basic parameters of track circuits associated with the interference current limits for RST are not in the scope of this Technical Specification. NOTE 2 Any phenomena linked to traction power supply and associated protection (over voltage, short-circuit current, under- and over-voltage if regenerative brakes are used) is part of the track circuit design and outside the scope of this Technical Specification.

BS DD CLC/TS 50238-2-2010系列标准