DIN EN 10246-7-2005
钢管的无损检验.第7部分:无缝和焊接钢管(埋弧焊除外)纵向缺陷检测用全圆周自动超声波检验

Non-destructive testing of steel tubes - Part 7: Automatic full peripheral ultrasonic testing of seamless and welded (except submerged arc welded) tubes for the detection of longitudinal imperfections; GEnglish version of DIN EN 10246-7:2005

DIN EN 10246-7-2005 发布历史

This part of EN 10246 specifies the requirements for automatic full peripheral ultrasonic shear wave (including phased array technique) and Lamb wave testing of seamless and welded steel tubes, with the exception of submerged arc-weld (SAW) tubes, for the detection of longitudinal imperfections. This European Standard specifies acceptance levels and calibration procedures. This part of EN 10246 is applicable to the inspection of tubes with an outside diameter > 10 mm, and with an outside diameter-to-thickness ratio _> 5. For tubes with an outside diameter-to-thickness ratio < 5, one of the options specified in Annex B shall be used by agreement between purchaser and manufacturer. The European Standard EN 10246 "Non-destructive testing of steel tubes" comprises the parts shown in Annex A.

DIN EN 10246-7-2005由德国标准化学会 DE-DIN 发布于 2005-12。

DIN EN 10246-7-2005 在中国标准分类中归属于: H26 金属无损检验方法，在国际标准分类中归属于: 23.040.10 铁管和钢管,77.040.20 金属材料无损检测。

DIN EN 10246-7-2005的历代版本如下：

• 2005年12月 DIN EN 10246-7-2005 钢管的无损检验.第7部分:无缝和焊接钢管(埋弧焊除外)纵向缺陷检测用全圆周自动超声波检验

DIN EN 10246-7-2005 钢管的无损检验.第7部分:无缝和焊接钢管(埋弧焊除外)纵向缺陷检测用全圆周自动超声波检验 于 2011-07 变更为 DIN EN ISO 10893-10-2011 钢管无损检测.第10部分:纵向和/或横向缺陷检测用无缝和焊接(埋弧焊除外)钢管的自动全外围超声波探伤法(ISO 10893-10-2011).德文版本EN ISO 10893-10-2011。

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 DIN EN 10246-7-2005 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

DIN EN 10246-7-2005

发布日期

2005年12月

实施日期

废止日期

无

中国标准分类号

H26

国际标准分类号

23.040.10;77.040.20

发布单位

DE-DIN

代替标准

DIN EN ISO 10893-10-2011

适用范围

This part of EN 10246 specifies the requirements for automatic full peripheral ultrasonic shear wave (including phased array technique) and Lamb wave testing of seamless and welded steel tubes, with the exception of submerged arc-weld (SAW) tubes, for the detection of longitudinal imperfections. This European Standard specifies acceptance levels and calibration procedures. This part of EN 10246 is applicable to the inspection of tubes with an outside diameter > 10 mm, and with an outside diameter-to-thickness ratio _> 5. For tubes with an outside diameter-to-thickness ratio < 5, one of the options specified in Annex B shall be used by agreement between purchaser and manufacturer. The European Standard EN 10246 "Non-destructive testing of steel tubes" comprises the parts shown in Annex A.