SAE J 1113/27-2012
车辆元件电磁兼容性的测量过程.第27部分:辐射电磁场的抗干扰性.振荡搅拌混响法

Electromagnetic Compatibility Measurements Procedure for Vehicle Components Part 27 Immunity to Radiated Electromagnetic Fields Mode Stir Reverberation Method

SAE J 1113/27-2012 发布历史

Vehicle electrical/electronic systems may be affected when immersed in an electromagnetic field generated by sources such as radio and TV broadcast stations, radar and communication sites, mobile transmitters, cellular phones etc. The reverberation method is used to evaluate the immunity of electronic devices in the frequency range of 500 MHz to 2.0 GHz, with possible extensions to 200 MHz to 10 GHz, depending upon chamber size and construction. Optional pulse modulation testing at HIRF (High Intensity Radiated Fields) test levels, based upon currently known environmental threats, has been added to this revision of the standard. This document addresses the Mode Stire (Continous Stirring) Reverberation testing method which has been successfully utilized as a design and production stage development tool for many years. The Model Tuned (Stepped Tuner) Reverberation testing method is covered in the SAE J1113-28 document. This document provides the component design and test engineers with a test procedure and the performance requirements necessary to evaluate the immunity of electronic devices to radiated electromagnetic fields early in the design stage as well as pilot and production stages. Ensuring electromagnetic compatibility early in the development stage will minimize costly changes later in the program and will prevent excessive component level hardening during full-vehicle level testing. The reverberation test method performs a dual function. The primary function of the method is to provide a bench test procedure correlative to vehicle-level radiated immunity testing in the anechoic chamber and at mobile transmitter sites. The method can be used to evaluate the relative performance of different designs of the same device.

SAE J 1113/27-2012由美国机动车工程师协会 US-SAE 发布于 2012-06-07。

SAE J 1113/27-2012 在中国标准分类中归属于: T04 基础标准与通用方法，在国际标准分类中归属于: 33.100.20 抗扰度,43.040.10 电气和电子设备。

SAE J 1113/27-2012 发布之时，引用了标准

• IEC 61000-4-21-2011 电磁兼容性(EMC).第4-21部分:试验和测量技术.混响室试验方法
• ISO 11452-11-2010 道路车辆.窄带辐射电磁能量的电干扰元部件试验方法.第11部分:混响室
• RTCA DO-160G-2010 RTCA DO-160G-2010
• SAE J 1113/1-2012 车辆、船(长15米)和机械(除飞机)(16.6 Hz～18 GHz)的部件的电磁兼容性测量方法和限值

SAE J 1113/27-2012的历代版本如下：

• 1995年02月01日 SAE J 1113/27-1995 车辆元件电磁兼容性的测量过程.第27部分:辐射电磁区的抗干扰性
• 2005年09月27日 SAE J 1113/27-2005 车辆元件电磁兼容性的测量过程.第27部分:辐射电磁场的抗干扰性.振荡搅拌混响法
• 2012年06月07日 SAE J 1113/27-2012 车辆元件电磁兼容性的测量过程.第27部分:辐射电磁场的抗干扰性.振荡搅拌混响法

SAE J 1113/27-2012 车辆元件电磁兼容性的测量过程.第27部分:辐射电磁场的抗干扰性.振荡搅拌混响法 由 SAE J 1113/27-2005 变更而来。

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 SAE J 1113/27-2012 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

SAE J 1113/27-2012

发布日期

2012年06月07日

实施日期

废止日期

无

中国标准分类号

T04

国际标准分类号

33.100.20;43.040.10;

发布单位

US-SAE

引用标准

IEC 61000-4-21-2011 ISO 11452-11-2010 MIL-STD-461-2007 RTCA DO-160G-2010 SAE J 1113/1-2012 NBS 1092 NIST 1506 NIST 1508

被代替标准

SAE J 1113/27-2005

适用范围

Vehicle electrical/electronic systems may be affected when immersed in an electromagnetic field generated by sources such as radio and TV broadcast stations, radar and communication sites, mobile transmitters, cellular phones etc. The reverberation method is used to evaluate the immunity of electronic devices in the frequency range of 500 MHz to 2.0 GHz, with possible extensions to 200 MHz to 10 GHz, depending upon chamber size and construction. Optional pulse modulation testing at HIRF (High Intensity Radiated Fields) test levels, based upon currently known environmental threats, has been added to this revision of the standard. This document addresses the Mode Stire (Continous Stirring) Reverberation testing method which has been successfully utilized as a design and production stage development tool for many years. The Model Tuned (Stepped Tuner) Reverberation testing method is covered in the SAE J1113-28 document. This document provides the component design and test engineers with a test procedure and the performance requirements necessary to evaluate the immunity of electronic devices to radiated electromagnetic fields early in the design stage as well as pilot and production stages. Ensuring electromagnetic compatibility early in the development stage will minimize costly changes later in the program and will prevent excessive component level hardening during full-vehicle level testing. The reverberation test method performs a dual function. The primary function of the method is to provide a bench test procedure correlative to vehicle-level radiated immunity testing in the anechoic chamber and at mobile transmitter sites. The method can be used to evaluate the relative performance of different designs of the same device.

SAE J 1113/27-2012系列标准