ASTM D5321-12
用直接剪切法测定土壤与土工合成物或土工合成物之间摩擦系数的标准试验方法

Standard Test Method for Determining the Shear Strength of Soil-Geosynthetic and Geosynthetic-Geosynthetic Interfaces by Direct Shear

被代替

ASTM D5321-12 发布历史

ASTM D5321-12由美国材料与试验协会 US-ASTM 发布于 2012。

ASTM D5321-12 在中国标准分类中归属于: W59 其他纺织制品。

ASTM D5321-12 用直接剪切法测定土壤与土工合成物或土工合成物之间摩擦系数的标准试验方法的最新版本是哪一版？

最新版本是 ASTM D5321/D5321M-21 。

ASTM D5321-12的历代版本如下：

• 2021年 ASTM D5321/D5321M-21 通过直接剪切测定土壤 - 土工合成 - 土工合成界面剪切强度的标准试验方法
• 2020年 ASTM D5321/D5321M-20 通过直接剪切测定土壤 - 土工合成 - 土工合成界面剪切强度的标准试验方法
• 2019年 ASTM D5321/D5321M-19 通过直接剪切测定土壤 - 土工合成 - 土工合成界面剪切强度的标准试验方法
• 2017年 ASTM D5321/D5321M-17 通过直接剪切测定土壤 - 土工合成 - 土工合成界面剪切强度的标准试验方法
• 2014年 ASTM D5321/D5321M-14 采用直接剪力法测定土壤与土工合成物或土工合成物之间抗剪强度的标准试验方法
• 2013年 ASTM D5321/D5321M-13 采用直接剪力法测定土壤与土工合成物或土工合成物之间抗剪强度的标准试验方法
• 2012年 ASTM D5321-12 用直接剪切法测定土壤与土工合成物或土工合成物之间摩擦系数的标准试验方法
• 2008年 ASTM D5321-08 用直接剪力法测定土壤与土工合成物或土工合成物之间摩擦系数的标准试验方法
• 2002年 ASTM D5321-02 用直接剪力法测定土壤与土工合成物或土工合成物之间摩擦系数的标准试验方法
• 1992年 ASTM D5321-92(1997) 通过直接剪切测定土壤 - 土工合成 - 土工合成界面剪切强度的标准试验方法

 

5. Significance and UseTop Bottom

5.1 The procedure described in this test method for determination of the shear resistance of the soil and geosynthetic or geosynthetic and geosynthetic interface is intended as a performance test to provide the user with a set of design values for the test conditions examined. The test specimens and conditions, including normal stresses, are generally selected by the user.

5.2 This test method may be used for acceptance testing of commercial shipments of geosynthetics, but caution is advised as outlined in 5.2.1.

5.2.1 The shear resistance can be expressed only in terms of actual test conditions (see Note 4 and Note 5). The determined value may be a function of the applied normal stress, material characteristics (for example, of the geosynthetic), soil properties, size of sample, drainage conditions, displacement rate, magnitude of displacement, and other parameters.

Note 4???In the case of acceptance testing requiring the use of soil, the user must furnish the soil sample, soil parameters, and direct shear test parameters. The method of test data interpretation for purposes of acceptance should be mutually agreed to by the users of this standard.Note 5???Testing under this test method should be performed by laboratories qualified in the direct shear testing of soils and meeting the requirements of Practice D3740, especially since the test results may depend on site-specific and test conditions.

5.2.2 This test method measures the total resistance to shear between a geosynthetic and a supporting material (substratum) or a geosynthetic and an overlying material (superstratum). The total shear resistance may be a combination of sliding, rolling and interlocking of material components.

5.2.3 This test method does not distinguish between individual mechanisms, which may be a function of the soil and geosynthetic used, method of material placement and hydration, normal and shear stresses applied, means used to hold the geosynthetic in place, rate of shear displacement, and other factors. Every effort should be made to identify, as closely as practicable, the sheared area and failure mode of the specimen. Care should be taken, including close visual inspection of the specimen after testing, to ensure that the testing conditions are representative of those being investigated.

5.2.4 Information on precision among laboratories is incomplete. In cases of dispute, comparative tests to determine whether a statistical bias exists among laboratories may be advisable.

5.3 The test results can be used in the......

标准号

ASTM D5321-12

发布

2012年

发布单位

美国材料与试验协会

替代标准

ASTM D5321/D5321M-13

当前最新

ASTM D5321/D5321M-21

 

 

ASTM D5321-12相似标准

推荐

谁引用了ASTM D5321-12 更多引用