SAE AMS 2649D-2013
高强度钢部件的腐蚀检查

Etch Inspection of High Strength Steel Parts

SAE AMS 2649D-2013 发布历史

This specification establishes the requirements for etch inspection of bare high strength low alloy steel parts having tensile strength of 180 ksi (1241 MPa) and higher and of carburized parts to detect overheating caused by abusive machining or grinding in the heat treated condition, and to detect localized discontinuous carburization. This process is not applicable to surface hardened steels produced by nitriding or carbonitriding. This process may remove 0.0001 to 0.0005 inch (2.5 to 12.7 micrometers) from the surface of the part.

SAE AMS 2649D-2013由美国机动车工程师协会 US-SAE 发布于 2013-12-13。

SAE AMS 2649D-2013在国际标准分类中归属于: 49.025.10 钢。

SAE AMS 2649D-2013 发布之时，引用了标准

• SAE AMS 2759/9D-2009 钢部件的(烘烤法)氢脆性消除
• ARP1923 

SAE AMS 2649D-2013的历代版本如下：

• 2013年12月13日 SAE AMS 2649D-2013 高强度钢部件的腐蚀检查

SAE AMS 2649D-2013 海带加工品 由 SAE AMS 2649C-2008 变更而来。

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 SAE AMS 2649D-2013 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

SAE AMS 2649D-2013

发布日期

2013年12月13日

实施日期

废止日期

无

国际标准分类号

49.025.10

发布单位

US-SAE

引用标准

MIL-PRF-16173 MIL-PRF-32033 SAE AMS 2759/9D-2009 ARP1923

被代替标准

SAE AMS 2649C-2008

适用范围

This specification establishes the requirements for etch inspection of bare high strength low alloy steel parts having tensile strength of 180 ksi (1241 MPa) and higher and of carburized parts to detect overheating caused by abusive machining or grinding in the heat treated condition, and to detect localized discontinuous carburization. This process is not applicable to surface hardened steels produced by nitriding or carbonitriding. This process may remove 0.0001 to 0.0005 inch (2.5 to 12.7 micrometers) from the surface of the part.