ISO 16841:2014
钢丝绳. 绳索安装的拉孔. 类型和最低要求
Steel wire ropes - Pulling eyes for rope installation - Types and minimum requirements
ISO 16841:2014 发布历史
This International Standard identifies the different types of pulling eyes prepared at, or attached to, a steel wire rope end for connection to another rope when installing a new rope or re-reeving an existing rope on a machine. This International Standard also specifies the minimum requirements for pulling eyes, including their geometry, strength, maximum line pull to which the pulling eye is intended to be subjected and information for use to be provided by the manufacturer. The pulling eyes covered by this International Standard are not intended to be subjected to a load when the machine performs a service operation. This International Standard applies to those pulling eyes prepared at, or attached to, ends of steel wire ropes conforming to ISO 2408 and ISO 10425. This International Standard does not apply to steel wire ropes with fibre cores. This International Standard does not cover those separate end connection accessories, which slide over the end of a rope and comprise an eye- and tubular-type braided rope, often referred to as a “wire rope stocking” or “cable sock”.
ISO 16841:2014由国际标准化组织 IX-ISO 发布于 2014-03。
ISO 16841:2014 在中国标准分类中归属于: H49 钢丝、钢丝绳，在国际标准分类中归属于: 77.140.65 钢丝、钢丝绳和环节链。
ISO 16841:2014 发布之时，引用了标准
- ISO 10425:2003 石油和天然气工业用钢丝绳.最低要求和验收条件
- ISO 17558:2006 钢丝绳.套接法.熔融金属和树脂套接
- ISO 17893:2004 钢丝绳.术语、标记和分类
- ISO 2408:2004 一般用途钢丝绳.最低要求
- ISO 7500-1:2004 静力单轴试验机的检验.第1部分:拉力和(或)压力试验机.测力系统的检验与校准
ISO 16841:2014的历代版本如下：
- 2014年 ISO 16841:2014 钢丝绳. 绳索安装的拉孔. 类型和最低要求
- 标准号
- ISO 16841:2014
- 发布
- 2014年
- 发布单位
- 国际标准化组织
- 当前最新
- ISO 16841:2014
- 引用标准
- ISO 10425:2003 ISO 17558:2006 ISO 17893:2004 ISO 2408:2004 ISO 7500-1:2004