IEC 61287-1:2014
轨道交通.安装在铁路机车上的电力变流器.第1部分:特性和试验方法
Railway applications - Power converters installed on board rolling stock - Part 1: Characteristics and test methods
IEC 61287-1:2014 发布历史
This part of IEC 61287 defines terminology@ service conditions@ general characteristics and test methods of electronic power converters onboard of rolling stock. This International Standard is applicable to power electronic converters mounted on board railway rolling-stock and intended for supplying ?C traction circuits; ?C auxiliary circuits of power vehicles@ coaches and trailers. The application of this standard extends as far as possible to all other traction vehicles@ including trolley-buses@ for example. This standard covers the complete converter assembly together with its mounting arrangements containing ?C semiconductor device assemblies; ?C integrated cooling systems; ?C integrated components like inductors@ capacitors@ transformers@ resistors@ contactors@ switches; ?C semiconductor drive units (SDU) and related sensors; ?C incorporated protection circuits. The following types of power sources are taken into consideration: ?C AC contact lines@ ?C DC contact lines@ ?C on-board supplies such as generators@ batteries and other electric power sources. This standard excludes converters which provide the electronic control supply for semiconductor drive units (SDU) and other supplies relevant to the converter operation such as sensors. NOTE 1 Electronic control equipment of converters and those sensors not related to semiconductor drive units and the printed circuit board assemblies of semiconductor drive units (SDU) are covered by IEC 60571. NOTE 2 Combined tests with the whole traction system or auxiliary supply system are not within the scope of this standard. E.g. rules for combined tests of a motor fed by a converter are given in the IEC 61377 series.
IEC 61287-1:2014由国际电工委员会 IX-IEC 发布于 2014-07-01，并于 2014-07-01 实施。
IEC 61287-1:2014 在中国标准分类中归属于: S35 牵引电气设备。
IEC 61287-1:2014 发布之时，引用了标准
- IEC 60050-551:1998 国际电工词汇 第551部分:电力电子学
- IEC 60050-811:1991 国际电工词汇 第811章:电力牵引
- IEC 60076-10:2001 电力变压器 第10部分：声级的测定
- IEC 60077-1:1999 轨道交通.机车车辆用电气设备 第1部分:一般运行条件和一般规则
- IEC 60270:2000 高电压试验技术.部分放电测量
- IEC 60310:2004 轨道交通.铁路车辆用牵引变压器和电感器
- IEC 60322:2001 轨道交通.机车车辆的电气设备 开敞式结构电力电阻器的规则
- IEC 60349-1:2010 电力牵引.铁路与道路车辆用旋转电机.第1部分:电子交流器供电的交流电动机除外的旋转电机
- IEC 60349-2:2010 电力牵引.铁路与道路车辆用旋转电机.第2部分:电子变流器补偿的交流电动机
- IEC 60349-4:2012 电力牵引.铁路与道路车辆用旋转电机.第4部分:与电子变流器相连接的永磁同步电机
- IEC 60384-4:2007 电子设备用固定电容器.第4部分:分规范.固体(MnO2)和非固体电解质的铝电解电容器
- IEC 60529:1989 由外壳提供的防护等级(IP代码)
- IEC 60571:2012 轨道交通.全部车辆用电子设备
- IEC 60721-3-5:1997 环境条件分类 第3部分:环境参数组及其严酷程度的分类分级 第5节:地面车辆上的设备
- IEC 60747-1:2006 半导体器件.第1部分:总则
IEC 61287-1:2014的历代版本如下：
- 1995年07月 IEC 61287-1:1995 安装在铁路机车上的电力变流器 第1部分:特性和试验方法
- 2005年09月 IEC 61287-1:2005 轨道交通.安装在铁路机车上的电力变流器.第1部分:特性和试验方法
- 2014年07月01日 IEC 61287-1:2014 轨道交通.安装在铁路机车上的电力变流器.第1部分:特性和试验方法
- 标准号
- IEC 61287-1:2014
- 发布日期
- 2014年07月01日
- 实施日期
- 2014年07月01日
- 废止日期
- 无
- 中国标准分类号
- S35
- 发布单位
- 国际电工委员会
- 引用标准
- IEC 60050-551:1998 IEC 60050-811:1991 IEC 60076-10:2001 IEC 60077-1:1999 IEC 60270:2000 IEC 60310:2004 IEC 60322:2001 IEC 60349-1:2010 IEC 60349-2:2010 IEC 60349-4:2012 IEC 60384-4:2007 IEC 60529:1989 IEC 60571:2012 IEC 60721-3-5:1997 IEC 60747-1:2006 IEC
- 被代替标准
- IEC 9/1918/FDIS:2014 IEC 61287-1:2005
- 适用范围
- This part of IEC 61287 defines terminology@ service conditions@ general characteristics and test methods of electronic power converters onboard of rolling stock. This International Standard is applicable to power electronic converters mounted on board railway rolling-stock and intended for supplying ?C traction circuits; ?C auxiliary circuits of power vehicles@ coaches and trailers. The application of this standard extends as far as possible to all other traction vehicles@ including trolley-buses@ for example. This standard covers the complete converter assembly together with its mounting arrangements containing ?C semiconductor device assemblies; ?C integrated cooling systems; ?C integrated components like inductors@ capacitors@ transformers@ resistors@ contactors@ switches; ?C semiconductor drive units (SDU) and related sensors; ?C incorporated protection circuits. The following types of power sources are taken into consideration: ?C AC contact lines@ ?C DC contact lines@ ?C on-board supplies such as generators@ batteries and other electric power sources. This standard excludes converters which provide the electronic control supply for semiconductor drive units (SDU) and other supplies relevant to the converter operation such as sensors. NOTE 1 Electronic control equipment of converters and those sensors not related to semiconductor drive units and the printed circuit board assemblies of semiconductor drive units (SDU) are covered by IEC 60571. NOTE 2 Combined tests with the whole traction system or auxiliary supply system are not within the scope of this standard. E.g. rules for combined tests of a motor fed by a converter are given in the IEC 61377 series.