VDI/VDE/DGQ/DKD 2622 Blatt 15.4-2010 发布历史

The guideline describes procedures for the calibration of current clamps. These must be traceable to national standards. This is valid specialcially for such measuring equipment, which is used within the range of EMV applications (electromagnetic compatibility), since due to the high frequency ranges within this area during the calibration and determination of uncertainty special difficulties arise. The guideline gives detailed instructions for the determination of the uncertainty of measurement associated for calibration. The procedures described in the guideline guarantee that metrological characteristic values considering economic criteria and according to sufficiently expressive methods are determined. At the same time it ensures correct and comparable measured values in the context of the indicated uncertainty of measurement.

VDI/VDE/DGQ/DKD 2622 Blatt 15.4-2010由德国机械工程师协会 DE-VDI 发布于 2010-05。

VDI/VDE/DGQ/DKD 2622 Blatt 15.4-2010在国际标准分类中归属于: 17.220.20 电和磁量值的测量。

VDI/VDE/DGQ/DKD 2622 Blatt 15.4-2010 发布之时，引用了标准

DIN 1319-1-1995 测量技术基础.第1部分:基本术语
DIN V ENV 13005-1999 测量时不确定性说明的指南
DIN EN ISO 10012-2004 测量管理系统.测量过程和测量设备的要求
DIN EN ISO/IEC 17025-2005 测试和校准实验室能力的一般要求
DIN VDE 0701-0702-2008 电器检修、改进后的检验.电器的定期鉴定.电气安全的一般要求
CISPR 16-1-2-2003 飞行器燃料舱中用作爆炸抑制剂和挡板材料的纤维聚酰胺材料.试验方法
VDI 1000-2006 Establishing guidelines - Principles and procedures

VDI/VDE/DGQ/DKD 2622 Blatt 15.4-2010的历代版本如下：

2007年06月01日 VDI/VDE/DGQ/DKD 2622 Blatt 15.4-2007 Calibration of measuring equipment for electrical quantities - Passive measuring equipment for use in EMC-applications - Current clamps
2010年05月 VDI/VDE/DGQ/DKD 2622 Blatt 15.4-2010

VDI/VDE/DGQ/DKD 2622 Blatt 15.4-2010 由 VDI/VDE/DGQ/DKD 2622 Blatt 15.4-2007 变更而来。

非常抱歉，我们暂时无法提供预览，您可以试试：免费下载 VDI/VDE/DGQ/DKD 2622 Blatt 15.4-2010 前三页，或者稍后再访问。

注意：点击下载后，生成下载文件时间比较长，请耐心等待......

标准号: VDI/VDE/DGQ/DKD 2622 Blatt 15.4-2010
发布日期: 2010年05月
实施日期
废止日期: 无
国际标准分类号: 17.220.20
发布单位: DE-VDI
引用标准: DIN 1319-1-1995 DIN V ENV 13005-1999 DIN EN ISO 10012-2004 DIN EN ISO 14253-1-1999 DIN EN ISO/IEC 17025-2005 DIN ISO 10012-1-1992 DIN VDE 0701-0702-2008 ANSI C 63.4-2009 CISPR 16-1-2-2003 DKD-3-1998 ISO Draft Guide 99999-2006 BGV A 3-1979 VDI 1000-2006 VD
被代替标准: VDI/VDE/DGQ/DKD 2622 Blatt 15.4-2007

适用范围: The guideline describes procedures for the calibration of current clamps. These must be traceable to national standards. This is valid specialcially for such measuring equipment, which is used within the range of EMV applications (electromagnetic compatibility), since due to the high frequency ranges within this area during the calibration and determination of uncertainty special difficulties arise. The guideline gives detailed instructions for the determination of the uncertainty of measurement associated for calibration. The procedures described in the guideline guarantee that metrological characteristic values considering economic criteria and according to sufficiently expressive methods are determined. At the same time it ensures correct and comparable measured values in the context of the indicated uncertainty of measurement.

VDI/VDE/DGQ/DKD 2622 Blatt 15.4-2010

Calibration of measuring equipment for electrical quantities - Passive measuring equipment for use in EMC-applications - Current clamps