ASTM D1188-2007(2015)
使用涂层后的样品测定致密沥青混合物的毛体积比重和密度的标准试验方法

Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Coated Samples

ASTM D1188-2007(2015) 发布历史

3.1x00a0;This test method is useful in calculating percent air voids as given in Test Method D3203. Since specific gravity has no units, it must be converted to density when this type of measurement is required. This conversion is made by multiplying the specific gravity at a given temperature by the density of water at the same temperature.

1.1x00a0;This test method covers the determination of bulk specific gravity of specimens of Parafilm-coated, compacted bituminous mixtures as defined in Terminology E12.

1.2x00a0;This method should be used with samples that contain open or interconnecting voids or absorb more than 28201;% of water by volume, or both, as determined by Section 8.

1.3x00a0;The bulk specific gravity of the compacted bituminous mixtures may be used in calculating the unit weight of the mixture.

1.4x00a0;This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

ASTM D1188-2007(2015)由美国材料与试验协会 US-ASTM 发布于 2007。

ASTM D1188-2007(2015)在国际标准分类中归属于: 91.100.50 粘合料、密封材料,93.080.20 道路建筑材料。

ASTM D1188-2007(2015)的历代版本如下：

• 2007年09月15日 ASTM D1188-07 使用涂层样品的压实沥青混合料的体积比重和密度的标准测试方法
• 2015年07月01日 ASTM D1188-07(2015) 使用涂层样品的压实沥青混合料的体积比重和密度的标准测试方法
• 2007年09月15日 ASTM D1188-07e1 使用涂层样品的压实沥青混合料的体积比重和密度的标准测试方法
• 1996年 ASTM D1188-1996(2002) 用涂石蜡样品测定压实的沥青混合料的体积比重和密度的标准试验方法
• 1996年 ASTM D1188-1996(2002)e1 用涂石蜡样品测定压实的沥青混合料的体积比重和密度的标准试验方法
• 1996年 ASTM D1188-1996e1 用涂石蜡样品测定压实的沥青混合料的体积比重和密度的标准试验方法
• 2007年 ASTM D1188-2007 使用涂层样品的压实沥青混合料的毛体积比重和密度的标准试验方法
• 2007年 ASTM D1188-2007(2015) 使用涂层后的样品测定致密沥青混合物的毛体积比重和密度的标准试验方法
•  ASTM D1188-2007(R2015) ASTM D1188-2007(R2015)
• 2007年 ASTM D1188-2007e1 用涂层样品测定压实的沥青混合料的体积比重和密度的标准试验方法
• 1996年08月10日 ASTM D1188-96(2002) 用石蜡涂层试样测定压实沥青混合物的堆积比重和密度的标准试验方法
• 1996年08月10日 ASTM D1188-96(2002)e1 用石蜡涂层试样测定压实沥青混合物的堆积比重和密度的标准试验方法
• 1996年08月10日 ASTM D1188-96e1 用石蜡涂层试样测定压实沥青混合物的堆积比重和密度的标准试验方法

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 ASTM D1188-2007(2015) 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

ASTM D1188-2007(2015)

发布日期

2007年

实施日期

废止日期

无

国际标准分类号

91.100.50;93.080.20

发布单位

US-ASTM

适用范围

3.1x00a0;This test method is useful in calculating percent air voids as given in Test Method D3203. Since specific gravity has no units, it must be converted to density when this type of measurement is required. This conversion is made by multiplying the specific gravity at a given temperature by the density of water at the same temperature.

1.1x00a0;This test method covers the determination of bulk specific gravity of specimens of Parafilm-coated, compacted bituminous mixtures as defined in Terminology E12.

1.2x00a0;This method should be used with samples that contain open or interconnecting voids or absorb more than 28201;% of water by volume, or both, as determined by Section 8.

1.3x00a0;The bulk specific gravity of the compacted bituminous mixtures may be used in calculating the unit weight of the mixture.

1.4x00a0;This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.