ASTM E2231-15
评定表面燃烧特性用管道和导管绝缘材料的试样制备和安装的标准实施规程

Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics

被代替

标准号

ASTM E2231-15

发布

2015年

发布单位

美国材料与试验协会

替代标准

ASTM E2231-18

当前最新

ASTM E2231-21

 

 

引用标准

ASTM A390 ASTM C1136 ASTM C1224 ASTM C1396/C1396M ASTM C168 ASTM E176 ASTM E2599 ASTM E84 IEEE/ASTM SI 10

适用范围

5.1 Pipe and duct insulation systems are often evaluated with Test Method E84 to comply with building or mechanical code requirements. This practice describes, in detail, specimen preparation and mounting procedures for single-component pipe or duct insulation systems and for multi-component pipe or duct insulation systems.

5.2 The material, system, composite, or assembly tested shall be representative of the completed insulation system used in actual field installations, in terms of the components, including their respective thicknesses.

5.3 Pipe and duct insulation systems consist of a variety of materials and constructions.

5.4 Some testing laboratories have developed a number of protocols for testing pipe or duct insulation systems which utilize one generic type of materials, all of them with an insulation core and a jacket. Those protocols are the origin of this practice, which makes them generic, to reduce material bias in the standard; they have resulted in the procedures presented in 6.1. The procedures presented in 6.2 – 6.5 address other types of pipe or duct insulation systems.

5.5 This practice addresses specimen preparation and mounting of systems of the types described in 5.5.1 – 5.5.3 and testing of supplementary materials as described in 5.6.

5.5.1 Multi-component systems containing an insulation core and a jacket, with or without adhesive between insulation core and jacket, not intended to be bonded to a pipe or duct substrate. Specimen preparation and mounting for such systems is described in 6.1 if they are self-supporting and in 6.2 if they are not self-supporting.

5.5.2 Single component systems, not intended to be bonded to a pipe or duct substrate. Specimen preparation and mounting for such systems is described in 6.3 if they are self-supporting and in 6.4 if they are not self-supporting.

5.5.3 Systems intended to be bonded to a pipe or duct substrate. Specimen preparation and mounting for such systems is described in 6.5.

5.5.4 Reflective insulation materials (see 3.2.10 and 3.2.11) intended to be used as pipe or duct insulation materials and installed with an air gap shall be tested using the procedures for specimen preparation and mounting procedures described in Practice E2599. Reflective insulation materials intended to be used as pipe or duct insulation materials and installed without an air gap shall b......

45°燃烧性测试实验方法

一、主题内容与适用范围　　本标准规定了服装用纺织品易燃性的测定方法及评定服装用纺织品易燃性的三种等级。　　本标准适用于测量易燃纺织品穿着时一旦点燃后燃烧的剧烈程度和速度。　　二、引用标准：GB 5457 纺织品及纺织制品的燃烧性能词汇表　　三、术语　　3.1 绒面。指织物中具有各种绒头的表面，如拉绒、起绒、簇绒、植绒或类似的表面。　　3.2 易燃性。...

FTT单体燃烧测试仪（SBI）

• “气体控制箱”，安装在测试箱观察窗旁边，以便操作人员可以同时查看测试试样和丙烷流量(mg/s)。该装置包括3个流量水平控制器、警示灯和过载设备。• “气体分流器”包括质量流量控制器，用于控制丙烷气体流量。两个供气管中的电磁阀和回火抑制器用于气体流向燃烧器的自动安全操作。这些被放置在靠近测试框架的地方，通过减少电磁阀和燃烧器之间的管道长度来提高燃烧器的响应时间。...

ASTM D1230-1994 服装纺织品可燃性的测试方法

引用标准2.1 ASTM标准：D123 与纺织；品有关的术语D484 烃类干洗溶剂的说明D2724 粘合、熔合和叠层服装纺织物的测试方法E122 评定批或处理批量尺度用样本大小的选择2.2 AATCC 试验方法AATCC 135 机织物和针织物在家用自动洗衣机中洗涤后尺寸的变化3. 术语3.1 定义：3.1.1 可燃纺织品—遭受外部火源时，可点燃并燃烧或可产生可点燃并燃烧的蒸汽。...

45°燃烧测试仪原理

b.气体燃烧器，4 1/2号注射器针头制成的。c. 计时器可自动计时，并准确到0.1s。2 刷毛装置用于起绒或簇绒织物的试样制备。由一个放置试样夹的合适滑动架和垂直安装于试样表面上的负重尼龙毛刷构成。滑动架下装四个轮子，可沿试样前后方向移动，它的移动距离稍超过试样暴露的长度。并装有供滑动轮子移动的导轨。...

---

谁引用了ASTM E2231-15 更多引用

ASTM C1728-23 柔性气凝胶绝缘材料标准规范 ASTM C1482-23 聚酰亚胺柔性蜂窝绝热和吸声材料的标准规范 ASTM C1410-17(2023) 蜂窝状三聚氰胺隔热和吸声材料的标准规范 ASTM C1594-23 聚酰亚胺硬质蜂窝绝热材料标准规范 ASTM E84-23 建筑材料表面燃烧特性的标准试验方法 ASTM C534/C534M-23 薄板和管状预制柔性弹性泡沫绝热材料标准规范 ASTM C1534-22 用作管道系统热和吸音衬垫的柔性聚合物泡沫板绝缘材料的标准规范 ASTM E2599-22 建筑用反射绝缘、辐射屏障和乙烯基拉伸天花板材料的样品制备和安装以评估表面燃烧特性的标准实施规程 ASTM C1728-22 柔性气凝胶绝缘标准规范 ASTM E84-22 建筑材料表面燃烧特性的标准试验方法

---