GB/T 23753-2020 Technical parameters and requirements for 110 kV and above oil-immersed shunt reactors

Scope: This standard specifies the terms, definitions, conditions of use, performance parameters, technical requirements, design and structure, inspection rules and methods, symbols, Lifting `packaging. Transport and storage. It also stipulates the performance parameters, technical requirements, design and structure, inspection rules and methods, marking, lifting, packaging, transportation and storage of the neutral point grounding reactor used for supporting oil-immersed shunt reactors of 110 kV and above. This standard applies to single-phase and three-phase oil-immersed shunt reactors with a rated frequency of 50 Hz and a nominal voltage of 110 kV and above, and neutral point grounding reactors for 110 kV and above oil-immersed shunt reactors . For reactors with special requirements, such as capacity-adjusting reactors, if the rated impedance has ±5%% or ±10%% taps, the adjustment of reactor capacity can be realized through off-excitation tap changers, and its technical requirements can be referred to. .

DL/T 722 Guide to the analysis and the diagnosis of gases dissolved in transformer oil
GB 2536 Fluids for electrotechnical applications.Unused mineral insulating oils for transformers and switchgear
GB/T 11604 Testing procedure of radio interference generated by high voltage equipment
GB/T 4109 Insulated bushings for alternating voltages above 1 000 V*， 2022-03-09 Update

2020 GB/T 23753-2020 Technical parameters and requirements for 110 kV and above oil-immersed shunt reactors
2009 GB/T 23753-2009 Specification and technical requirements for 330kV and 500kV oil-immersed shunt reactors

GB/T 23753-2020Technical parameters and requirements for 110 kV and above oil-immersed shunt reactors