This standard specifies the types and parameters, technical requirements, test methods, inspection rules, marks, coating, packaging, transportation and storage of compressed natural gas cylinders for automobiles (hereinafter referred to as cylinders). This standard is applicable to the design and manufacture of steel cylinders with a nominal working pressure of 16-20MPa (the pressure in this standard refers to gauge pressure), a nominal volume of 30-120L, and an operating temperature of -50°C to 60°C. Steel cylinders manufactured according to this standard are only allowed to be filled with natural gas that meets the relevant standards and has been dehydrated, desulfurized and delightened, with a moisture content of no more than 8mg and a hydrogen sulfide content of no more than 20mg per standard cubic meter. . This standard does not apply to gas storage cylinders used in compressed natural gas refueling stations, nor to composite gas cylinders.
GB 17258-1998 history
2022GB/T 17258-2022 Steel cylinders for the on-board storage of compressed natural gas as a fuel for automotive vehicles
2011GB 17258-2011 Steel cylinders for the on-board storage of compressed natural gas as a fuel for automotive vehicles
1998GB 17258-1998 Steel cylinders for the on-board of compressed natural gas as a fuel for vehicles