GB 17258-2011
Steel cylinders for the on-board storage of compressed natural gas as a fuel for automotive vehicles (English Version)

Standard No.

GB 17258-2011

Language

Chinese, Available in English version

Release Date

2011

Published By

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China

Status

Be replaced 2023-05

Replace By

GB/T 17258-2022

Latest

GB/T 17258-2022

Replace

GB 17258-1998

Scope

This standard specifies the types, parameters, technical requirements, test methods, inspection rules, marks, coating, packaging, transportation and storage of compressed natural gas cylinders for automobiles (hereinafter referred to as cylinders). This standard is applicable to the design and manufacture of steel cylinders with a nominal working pressure of 20 MPa (the standard pressure refers to gauge pressure), a nominal water volume of 30 L to 300 L, an operating temperature of -40 °C to 65 °C, and a design service life of 15 years. . Steel cylinders manufactured according to this standard are only used to fill compressed natural gas for vehicles that comply with GB 18047, used as fuel for vehicles, and fixed on vehicles; additional loads caused by external forces, etc. are not included in the service conditions. This standard does not apply to gas storage cylinders used in compressed natural gas refueling stations, nor to steel cylinders of welded construction.

GB 17258-2011 Referenced Document

• GB 13447 Steel blank for seamless gas cylinder
• GB 15385 Method for hydraulic burst test of gas cylinders
• GB 18047 compressed natural gas as vehicle fuel*， 2017-09-07 Update
• GB 18248 Seamless steel tubes for gas cylinder
• GB 7144 Coloured cylinder mark for gases
• GB 8335 Special threads for gas cylinders
• GB/T 12137 Methods for leakage test of gas cylinders*， 2015-12-10 Update
• GB/T 12606 Full-circumference automatic magnetic flux leakage testing of seamless and welded (except submerged arc welded) ferromagnetic steel pipes for longitudinal and/or transverse imperfections*， 2021-12-01 Update
• GB/T 13005 Terminology of gas cylinders
• GB/T 13298 Inspection methods of microstructure for metals
• GB/T 13320 Metellographic grading atlas and assessing method for steel die forgings
• GB/T 1979 Standard diagrams for macrostructure and defect of structural steels
• GB/T 222 Permissible tolerances for chemical composition of steel products
• GB/T 223.1 Determination of carbon content in iron,steel and alloy
• GB/T 223.10 Methods for chemical analysis of iron,steel and alloy The cupferron separation-chrome azurol S photometric method for the determination of aluminium content
• GB/T 223.11 Determination of chromium content in iron, steel and alloy by visual titration or potentiometric titration
• GB/T 223.12 Methods for chemical analysis of iron,steel and alloy--The sodium carbonate separation-diphenyl carbazide photometric method for the determination of chromium content
• GB/T 223.13 Methods for chemical analysis of iron,steel and alloy The ammonium ferrous sulfate titration method for the determination of vanadium content
• GB/T 223.14 Methods for chemical analysis of iron,steel and alloy The N-benzoy-N-phenylhydroxylamine extraction photometric method for the determination of vanadium content
• GB/T 223.15 Chemical analysis of iron,steel and alloy--The determination of titanium by gravimetric method
• GB/T 223.16 Methods for chemical analysis of iron,steel and alloy--The chromotropic acid photometric method for the determination of titanium content
• GB/T 223.17 Methods for chemical analysis of iron,steel and alloy--The diantipyrylmethane photometric method for the determination of titanium content
• GB/T 223.18 Methods for chemical analysis of iron steel and alloy.The sodium thiosulfate separation iodimetric method for the determination of cupper content
• GB/T 223.19 Methods for chemical analysis of iron,steel and alloy--The neocuproine-chloroform extraction photometric method for the determination of copper content
• GB/T 223.20 Methods for chemical analysis of iron steel and alloy.The Potentiometric titration method for the determination of cobalt content
• GB/T 223.21 Methods for chemical analysis of iron steel and alloy.The 5-CL-PADAB spectrophotometric method for the determination of cobalt content
• GB/T 223.22 Methods for chemical analysis of iron ,steel and alloy.The nitroso-R-salt spectrophotometric method for the determination of cobalt content
• GB/T 223.23 Iron,,steel and alloy.Determination of nickel content.The dimethylglyoxime spectrophotometric method
• GB/T 223.24 Methods for chemical analysis of iron, steel and alloy.The extraction seperation--The dimethylglyoxime spectrophotometric method for the determination of nickel content
• GB/T 223.25 Methods for chemical analysis of iron, steel and alloy.The dimethylglyoxime gravimetric method for the determination of nickel content
• GB/T 223.26 Iron,steel and alloy.Determination of molybdenum content.The thiocyanate spectrophotometric method
• GB/T 223.27 Methods for chemical analysis of iron, steel and alloy.The thiocyanate-butyl acetate extraction spectrophotometric method for the determination of molybdenum content
• GB/T 223.28 Methods for chemical analysis of iron,steel and alloy--The α-benzoinoxime gravimetric method for the determination of molybdenum content
• GB/T 223.29 Iron,steel and alloy.Determination of lead content.Carrier precipitation-xylenol orange spectrophotometric method
• GB/T 223.3 Methods for chemical analysis of iron, steel and alloy--The diantipyrylmethane phosphomolybdate gravimetric method for the determination of phosphorus content
• GB/T 223.30 Methods for chemical analysis of iron,steel and alloy. The arsenazo Ⅲ spectrophotometric method for the determination of zirconium content after separation by p-bromomandelic acid
• GB/T 223.31 Iron,steel and alloy.Determination of arsenic content.Distillation-molybdenum blue spectrophotometric method
• GB/T 223.32 Methods for chemical analysis of iron,steel and alloy. The hypophosphite reduction-iodimetric method for the determination of arsenic content
• GB/T 223.33 Methods for chemical analysis of iron,steel and alloy. The chlorophosphonazo mA photometric method for the determination of cerium content after extraction separation
• GB/T 223.34 Methods for chemical analysis of iron,steel and alloy-The determination of hydrochloric acid-insoluble content of iron powders
• GB/T 223.35 Methods for chemical analysis of iron,steel and alloy--The pulse heating inert gas fusion-coulometric titration method for the determination of oxygen content
• GB/T 223.36 Methods for chemical analysis of iron, steel and alloy. The neutral titration method for the determinaion of nitrogen content after distillation separation
• GB/T 223.37 Iron, steel and alloy—Determination of nitrogen content—Indophenol blue spectrophotometric method after distillation separation*， 2020-06-02 Update
• GB/T 223.38 Methods for chemical analysis of iron,steel and alloy--The anion-exchange separation-gravimetric method for the determination of niobium content
• GB/T 223.39 Methods for chemical analysis iron,steel and alloy. The sulphochlorophenol S photometric method for the determination of niobium content
• GB/T 223.4 Alloyed steel.Determination of manganese content.Potentiometric or visual titration method
• GB/T 223.40 Iron, steel and alloy Determination of niobium content by the sulphochlorophenol S spectrophotometric method
• GB/T 223.41 Methods for chemical analysis of iron,steel and alloy--The anion-exchange separation-pyrogallol photometric method for the determination of tantalum content
• GB/T 223.42 Methods for chemical analysis of iron,steel and alloy--The anion-exchange separation-bromopyrogallol red photometric method for the determination of tantalum content
• GB/T 223.43 Iron,steel and alloy.Determination of tungsten content.Gravimetric method and spectrophotometric method
• GB/T 223.45 Methods for chemical analysis of iron,steel and alloy. The cupral Separation-xylidyl blue Ⅱphotometric method for the determination of magnesium content
• GB/T 223.46 Methods for chemical analysis of iron,steel and alloy--The flame atomic absorption spectrometric method for the determination of magnesium content
• GB/T 223.47 Methods for chemical analysis of iron,steel and alloy. The carrier precipitation-molybdenum blue potometric method for the determination of antimony content
• GB/T 223.48 Methods for chemical analysis of iron,steel and alloy--The semixylenol orange photometric method for the determination of bismuth content
• GB/T 223.49 Methods for chemical analysis of iron,steel and alloy. Extraction separation-chlorophosphonazo mA spectrophotometric method for the determination of the total rare tarth content
• GB/T 223.5 Steel and iron.Determination of acid-soluble silicon and total silicon content.Reduced molybdosilicate spectrophotometric method
• GB/T 223.50 Methods for chemical analysis of iron, steel and alloy. The phenylfluorone-CTMAB direct photometric method for the determination of tin content
• GB/T 223.51 Methods for chemical analysis of iron,steel and alloy--The 2-(5-Bromo-2-pyridylazo)-5-diethylaminophenol photometric method for the determination of zinc content
• GB/T 223.52 Methods for chemical analysis of iron,steel and alloy--The hydroxylamine hydrochloride-iodometric method for the determination of selenium content
• GB/T 223.53 Methods for chemical analysis of iron,steel and alloy--The flame atomic absorption spectrophotometric method for the determination of copper content
• GB/T 223.54 Iron, steel and alloy—Determination of nickel content—Flame atomic absorption spectrometric method*， 2022-07-11 Update
• GB/T 223.55 Iron, steel and alloy. Determination of tellurium content. Oscillo-polarographic method
• GB/T 223.56 Methods for chemical analysis of iron,steel and alloy--The sulfhydryl cotton fiber separation-oscillopolarographic method for the determination of tellurium content
• GB/T 223.57 Methods for chemical analysis of iron,steel and alloy--The extraction-absorption catalytic polarographic method for the determination of cadmium content
• GB/T 223.58 Methods for chemical analysis of iron,steel and alloy--The sodium arsenite-sodium nitrite titrimetric method for the determination of manganese content
• GB/T 223.59 Iron,steel and alloy.Determination of phosphorus content.Bismuth phosphomolybdate blue spectrophotometic method and antimony phosphomolybdate blue spectruophotometric method
• GB/T 223.6 Methods for chemical analysis of iron,steel and alloy. The neutralization titrimetric method for the determination of boron content
• GB/T 223.60 Methods for chemical analysis of iron, steel and alloy--The perchloric acid dehydration gravimetric method for the determination of silicon content
• GB/T 223.61 Methods for chemical analysis of iron, steel and alloy--The ammonium phosphomolybdate volumetric method for the determination of phosphorus content
• GB/T 223.62 Methods for chemical analysis of iron, steel and alloy--The butyl acetate extraction photometric method for the determination of phosphorus content
• GB/T 223.63 Iron, steel and alloy—Determination of manganese content—Sodium (potassium) periodate spectrophotometric method*， 2022-07-11 Update
• GB/T 223.64 Iron,steel and alloy.Determination of manganese content.Flame atomic absorption spectrometric method
• GB/T 223.65 Steel, iron and alloy.Determination of cobalt content.Flame atomic absorption spectrometric method*， 2012-12-31 Update
• GB/T 223.66 Methods for chemical analysis of iron,steel and alloy--The thiocyanate-chlorpromazine hydrochloride-chloroform extraction photometric method for the determination of tungsten content
• GB/T 223.67 Iron,steel and alloy.Determination of sulfur content.Methylene blue spectrophotometric method
• GB/T 223.68 Methods for chemical analysis of iron, steel and alloy. The potassium iodate titration method after combustion in the pipe furnace for the determination of sulfur content
• GB/T 223.69 Iron,steel and alloy.Determination of carbon contents.Gas-volumetric method after combustion in the pipe furnace
• GB/T 223.7 Iron powder--Determination of iron content--Potassium dichromate titration method
• GB/T 223.70 Iron,steel and alloy.Determination of iron contents. o-Phenanthroline spectrophotometric method
• GB/T 223.71 Methods for chemical analysis of iron, steel and alloy. The gravimetric method after combustion in the pipe furnace for the determination of carbon content
• GB/T 223.72 Iron,steel and alloy.Determination of sulfur content.Gravimetric method
• GB/T 223.73 Iron,steel and alloy.Determination of iron contents. Titanium trichloride-potassium dichromate titration method
• GB/T 223.74 Methods for chemical analysis of iron, steel and alloy. The combustion gravimetric/gas-volumetric method for the determination of combined carbon content
• GB/T 223.75 Iron,steel and alloy.Determination of boron content. Methanol distillation-curcumin photometric method
• GB/T 223.76 Methods for chemical analysis iron,steel and alloy.The flame atomic absorption spertrometric method for the determination of vanadium content
• GB/T 223.77 Methods for chemical analysis iron,steel and alloy.The flame atomic absorption spertrometric method for the determination of calcium content
• GB/T 223.78 Methods for chemical analysis of iron,steel and alloy-Curcumin spectrophotometric method for the determination of boron content
• GB/T 223.79 Iron and steel-Determination of multi-element contents-X-ray fluorescence spectrometry (Routine method)
• GB/T 223.8 Methods for chemical analysis of iron,steel and alloy The sodium fluoride separation-EDTA titration method for the determination of aluminium content
• GB/T 223.80 Iron,steel and alloy-Determination of trace bismuth and arsenic contents- Hydride generation-atomic fluorescence spectrometric method
• GB/T 223.81 Iron,steel and alloy-Determination of total aluminum and total aluminum and total boron contents-Microwave digestion-inductively coupled plasma mass spectrometric method
• GB/T 223.82 Steel and iron.Determination of hydrogen content.Thermal conductivity/infrared method after fusion under inert gas*， 2018-05-14 Update
• GB/T 223.83 Steel and iron.Determination of high sulfur content.Infrared absorption method after combustion in an induction furnace
• GB/T 223.84 Steel and iron.Determination of titanium content.Diantipyrylmethane spectrophotometric method
• GB/T 223.85 Steel and iron.Determination of sulfur content.Infrared absorption method after combustion in an induction furnace
• GB/T 223.86 Steel and iron.Determination of total carbon content.Infrared absorption method after combustion in an induction furnace
• GB/T 223.87 Iron, steel and alloy.Determination of calcium and magnesium.Inductively coupled plasma mass spectrometric method*， 2018-05-14 Update
• GB/T 223.88 Iron, steel and alloy—Determination of calcium and magnesium contents—Inductively coupled plasma atomic emission spectrometric method*， 2019-06-04 Update
• GB/T 223.89 Iron, steel and alloy—Determination of tellurium content—Hydride generation-atomic fluorescence spectrometric method*， 2019-08-30 Update
• GB/T 223.9 Iron,steel and alloy.Determination of aluminium content.Chrome azurol S photometric method
• GB/T 223.90 Iron, steel and alloy—Determination of silicon content—Inductively coupled plasma atomic emission spectrometric method*， 2021-08-20 Update
• GB/T 223.91 Iron, steel and alloy—Determination of copper—2,2’-Biquinoline spectrophotometric method*， 2021-08-20 Update
• GB/T 224 Determination of the depth of decarburization of steels*， 2019-06-04 Update
• GB/T 226 Test method for macrostructure and defect of steel by etching*， 2015-09-11 Update
• GB/T 228.1 Metallic materials—Tensile testing—Part 1: Method of test at room temperature*， 2021-12-31 Update
• GB/T 229 Metallic materials—Charpy pendulum impact test method*， 2020-09-29 Update
• GB/T 23 Bolts,small hexagon head with hole through the shank
• GB/T 232 Metallic materials.Bend test
• GB/T 4157-2006 Laboratory testing of metals for resistance to specific forms of environmental cracking in HS environments
• GB/T 4336 Determination of multi-element content in carbon steel and medium and low alloy steel Spark discharge atomic emission spectrometry (conventional method) Amendment No. 1
• GB/T 5777 Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections*， 2019-06-04 Update
• GB/T 8336 Special thread gauges for gas cylinders
• GB/T 9251 Methods for hydrostatic test of gas cylinders*， 2022-03-09 Update
• GB/T 9252 Method for pressure cycling test of gas cylinders*， 2017-10-14 Update

GB 17258-2011 history

• 2022 GB/T 17258-2022 Steel cylinders for the on-board storage of compressed natural gas as a fuel for automotive vehicles
• 2011 GB 17258-2011 Steel cylinders for the on-board storage of compressed natural gas as a fuel for automotive vehicles
• 1998 GB 17258-1998 Steel cylinders for the on-board of compressed natural gas as a fuel for vehicles