GB/T 30790.6-2014 Paints and varnishes.Corrosion protection of steel structures by protective paint systems.Part 6: Laboratory performance test methods (English Version)
This part of GB/T 30790 specifies the laboratory test methods and test conditions for evaluating coating systems for corrosion protection of steel structures. The test results can be used as a reference for selecting a suitable coating system and should not be used as accurate information for determining durability. This standard covers protective paint systems for use on uncoated steel, hot-dip galvanized steel and thermally sprayed galvanized steel surfaces. This section does not apply to galvanized steel or protective coating systems for coated steel. Certain tests in this section are not applicable to many waterborne coating systems (see 4.2). However, some waterborne coating systems can be tested and evaluated using the procedures in this standard, and the test results should be taken into account. The environmental types defined in GB/T 30790.2 need to be considered.
GB/T 30790.6-2014 Referenced Document
GB/T 13288.1 Preparation of steel substrates before application of paints and related products.Surface roughness characteristics of blast-cleaned substrates.Part 1:Specification and definitions for ISO surface profile comparators for the assessment of abrasive blast-c
GB/T 13288.2 Preparation of steel substrates before application of paints and related products.Surface roughness characteristics of blast-cleaned steel substrates.Part 2:Method for the grading of surface profile of abrasive blast-cleaned steel.Comparator procedure
GB/T 13452.2 Paints and varnishes.Determination of film thickness
GB/T 13893 Paints and varnishes.Determination of resistance to humidity.Continuous condensation
GB/T 14293 Corrosion tests in artificial atmospheres--General requirement
GB/T 1771 Paints and varnishes.Determination of resistance to neutral salt spray(fog)
GB/T 20777 Paints and varnishes Examination and preparation of samples for testing
GB/T 30790.1 Paints and varnishes.Corrosion protection of steel structures by protective paint systems.Part 1:General introduction
GB/T 30790.2 Paints and varnishes.Corrosion protection of steel structures by protective paint systems.Part 2:Classification of environments
GB/T 30790.4 Paints and varnishes.Corrosion protection of steel structures by protective paint systems.Part 4: Types of surface and surface preparation
GB/T 30790.5 Paints and varnishes.Corrosion protection of steel structures by protective paint systems.Part 5: Protective paint systems
GB/T 3186 Paints, varnishes and raw materials for paints and varnishes. Sampling
GB/T 5210 Paints and varnishes. Pull-off test for adhesion
GB/T 8923.1 Preparation of steel substrates before application of paints and related products.Visual assessment of surface cleanliness.Part 1:Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coa
GB/T 9286 Paints and varnishes—Cross-cut test*, 2021-08-20 Update
ISO 2812-1 Paints and varnishes - Determination of resistance to liquids - Part 1: Immersion in liquids other than water*, 2017-10-31 Update
ISO 2812-2 Paints and varnishes — Determination of resistance to liquids — Part 2: Water immersion method*, 2018-11-06 Update
ISO 3231 Paints and varnishes; determination of resistance to humid atmospheres containing sulfur dioxide
ISO 4628-1 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 1: General introduction and designation system*, 2016-01-01 Update
ISO 4628-2 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering*, 2016-01-01 Update
ISO 4628-3 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting*, 2015-12-31 Update
ISO 554 Standard atmospheres for conditioning and/or testing; Specifications
GB/T 30790.6-2014 history
2014GB/T 30790.6-2014 Paints and varnishes.Corrosion protection of steel structures by protective paint systems.Part 6: Laboratory performance test methods