GB/T 273.3-2015
Rolling bearings.Boundary dimensions, general plan.Part 3:Radial bearings
2021-06
- Standard No.
- GB/T 273.3-2015
- Language
- Chinese
- Release Date
- 2015
- Published By
- General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China
- Replace By
- GB/T 273.3-2020
- Lastest
- GB/T 273.3-2020
- Replace
- GB/T 273.3-1999
- Scope
- This part of GB/T 273 specifies the preferred dimensions of radial bearings of diameter series 7, 8, 9, 0, 1, 2, 3 and 4.
GB/T 273.3-2015 Referenced Document
- GB 17799.3-2012 Electromagnetic compatibility (EMC).Generic standards.Emission standard for residential,commercial and light-industrial environments
- GB 17799.4-2012 Electromagnetic compatibility(EMC).Generic standards.Emission standard for industrial environments
- GB 3836.14-2000 Electrical apparatus for explosive gas atmospheres. Part 14: Classification of hazardous areas
- GB 3836.4-2010 Explosive atmospheres.Part 4:Equipment protection by intrinsic safety "i"
- GB 4208-2008 Degrees of protection provided by enclosure(IP code)
- GB/T 15329.1 Rubber hoses and hose assemblies--Textile-reinforced hydraulic types--Specification--Part 1: Oil-based fluid applications
- GB/T 17799.1-1999 Electromagnetic compatibility-- Generic Standards-- Immunity for residential,commercial and light-industrial environments
- GB/T 17799.2-2003 Electromagnetic compatibility--Generic standards--Immunity for industrial environments
- GB/T 20057-2012 Rolling bearings.Single-row cylindrical roller bearings.Chamfer dimensions for loose rib and non-rib sides
- GB/T 20058-2006 Rolling bearings.Single-row angular contact ball bearings.Chamfer dimensions for outer ring non-thrust side
- GB/T 274-2000 Rolling bearings-Chamfer dimension-Maximum values
- GB/T 305-1998 Rolling bearings--Snap ring groove and snap ring on outer ring--Dimensions and tolerances
- GB/T 5563 Rubber and plastics hoses and hose assemblies.Hydrostatic testing
- GB/T 6104-2005 Powered industrial trucks.Terminology
- GB/T 6930-2002 Rolling bearings--Vocabulary
- GB/T 7811-2007 Rolling bearings Symbols for quantities
- GB/T 7826 System Reliability Analysis Technique Failure Mode and Effects Analysis (FMEA) program
GB/T 273.3-2015 history
- 2020 GB/T 273.3-2020 Rolling bearings—Boundary dimensions，general plan—Part 3:Radial bearings
- 2015 GB/T 273.3-2015 Rolling bearings.Boundary dimensions, general plan.Part 3:Radial bearings
- 1999 GB/T 273.3-1999 Rolling bearings--Radial bearings--Boundary dimensions,general plan
- 0000年 GB/T 273.3-1988
GB/T 273.3-2015 Rolling bearings.Boundary dimensions, general plan.Part 3:Radial bearings was changed to GOST R IEC 60601-1-8-2007 Medical electrical equipment. Part 1-8. General requirements for safety. General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems.