ZH
RU
ES
Wire Flame Retardancy Test
Wire Flame Retardancy Test, Total:500 items.
In the international standard classification, Wire Flame Retardancy Test involves: Components and accessories for telecommunications equipment, Electrical wires and cables, Protection against fire, Products of the textile industry, Rubber and plastics products, Protective equipment, Electromechanical components for electronic and telecommunications equipment, Galvanic cells and batteries, Wood, sawlogs and sawn timber, Insulating materials, Paper and board, Transformers. Reactors, Audio, video and audiovisual engineering, Continuous handling equipment, Electrical and electronic testing, Road vehicle systems, Welding, brazing and soldering, Testing of metals, Clothes, Materials for aerospace construction, Tyres, Rotating machinery, Conducting materials, Terminology (principles and coordination), Paints and varnishes, Fuels, Analytical chemistry, Integrated circuits. Microelectronics, Printed circuits and boards, Electronic components in general, Textile fibres, Flexible drives and transmissions, Footwear, Insulating fluids, Electrical accessories, Leather technology, Products of non-ferrous metals, Ceramics, Electricity. Magnetism. Electrical and magnetic measurements, Aerospace electric equipment and systems, Thermodynamics and temperature measurements, Non-ferrous metals, Resistors, Products of the chemical industry, Switchgear and controlgear, Surface treatment and coating, Corrosion of metals, Glass, Packaging and distribution of goods in general, Power transmission and distribution networks, Railway rolling stock, Plastics, Wood-based panels, Protection against electric shock, Electrical engineering in general, Industrial furnaces, ENVIRONMENT. HEALTH PROTECTION. SAFETY, Wastes, Environmental protection, Insulation, Test conditions and procedures in general, Fuel cells, Fasteners, Commercial vehicles, Power stations in general, Electrical equipment for working in special conditions.
AT-ON, Wire Flame Retardancy Test
- ONORM E 3652-1989 Tests on cables and flexible cords; flame retardance-test on bunched cables
- ONORM E 3510 Teil.4-1990 Concepts for cables, flexible cords and insulated wires; Flame retardance, low temperature resistance, heat resistance; terms and definitions.
- ONORM EN 2310-1991 Aerospace series - Test methods for the flame resistance rating of non-metallic materials
PL-PKN, Wire Flame Retardancy Test
- PN E04160-55-1989 Electric cables Methods of testing Tests for flame retardance
- PN E06130-02-1986 Power line carrier systems Coupling systems Line traps Requirements and tests
- PN T05129-1988 Electromechanical components for electronic equipment -- Basic testing procedures and measuring methods -- Cable clamping tests, explosion hazard tests, chemical resistance tests, fire hazard tests, R.F. resistance tests, capacitance tests, shielding and
- PN E04410-21-1986 Electroinsulating varnishes Test methods Testing of volume resistivity
- PN E06508-1990 Decade resistance boxes General requirements and tests
- PN E06509-1990 Standard resistors General requirements and tests
Professional Standard - Electron, Wire Flame Retardancy Test
- SJ 2933-1988 High-voltage connecting wires with flame retarding insulation for use in television receivers
- SJ/Z 9178-1995 Specifications for determination of 2W flame-retardant power type wirewound resistors used for VCR
- SJ/Z 9179-1995 Specifications for determination of porcelain-shell flame-retardant power type wirewound resistors used for VCR
Professional Standard - Coal, Wire Flame Retardancy Test
- MT/T 386-1995 Test method and determination rules for fire redundancy of flame retardant cables intended to be used in coal mines
- MT 386-1995 Test method and judgment rules for flame retardancy of flame retardant cables used in coal mines
- MT/T 386-2011 Test methods and compliance of flame resistant performance for mining cables
- MT 374-1994 Safety test methods and judgment rules for flame retardant and antistatic V-belts
- MT 818.10-1999 Flame retardant cables intended to be used in coal mines Unit 1: Moveable flame retardant flexible cables intended to be used in coal mines Part 10 Lamp wires of miner's helmet intended to be used in coal mines
- MT 450-1995 Test method and judgment rules for flame retardant and antistatic properties of steel cord conveyor belts used in coal mines
- MT 449-1995 Flame retardant and antistatic test methods and judgment rules for steel wire rope traction conveyor belts used in coal mines
- MT 113-1995 General test methods and judgment rules for flame retardant and antistatic properties of polymer products used in coal mines
- MT/T 113-1995
Korean Agency for Technology and Standards (KATS), Wire Flame Retardancy Test
- KS K 0180-2021 Test method for electrical resistance of yarns
- KS C 3619-1994(2009) Flame test method for flame retardant sheath of telecommunication cables
- KS C 3619-1994 Flame test method for flame retardant sheath of telecommunication cables
- KS C 3341-2014 Halogen free flame retardant poly-olefin insulation wire
- KS C 3341-2015 Halogen free flame retardant poly-olefin insulation wire
- KS C IEC 60332-3-21-2003(2018)
- KS F 2298-2016(2021) Flame retardant testing method for vertical protection mesh
- KS F 2298-1985 Flame retardant testing method for vertical protection mesh
- KS K 0583-2016 Test method for flame resistance of cloth：Horizontal method
- KS M 6678-2008(2018) Flame resistant conveyor belts－Classification and test method
- KS K 0583-2016(2021) Test method for flame resistance of cloth：Horizontal method
- KS M 6678-2006 Flame resistant conveyor belts－Classification and test method
- KS K 0583-2022 Test method for flame resistance of cloth: Horizontal method
- KS M 6678-1974 Flame resistant conveyor belts－Classification and test method
- KS K 0583-1985 Test method for flame resistance of cloth: Horizontal method
- KS C 2603-1980 Testing Method for Conductor-Resistance and Resistivity of Metallic Resistance materials
- KS C 3341-2012 Halogen free flame retardant poly-olefin power control, cable & insulation wire
- KS M ISO 16392:2010 Tyres-Electrical resistance-Test method for measuring electrical resistance of tyres on a test rig
- KS M 6678-2008 Flame resistant conveyor belts－Classification and test method
- KS B ISO 17654:2003 Destructive tests on welds in metallic materials-Resistance welding-Pressure tests on resistance seam welds
- KS B ISO 17654-2003(2013) Destructive tests on welds in metallic materials－Resistance welding－Pressure tests on resistance seam welds
- KS B ISO 17654:2014 Destructive tests on welds in metallic materials－Resistance welding－Pressure tests on resistance seam welds
- KS C IEC 62567:2022 Overhead lines — Methods for testing self-damping characteristics of conductors
- KS M ISO 340:2008 Conveyor belts－Laboratory scale flammability characteristics－Requirements and test method
- KS M 7074-2021 Testing method for flame resistance of treated paper and paperboard
- KS M 7074-2002 Testing method for flame resistance of treated paper and paperboard
- KS C ISO 8205-3:2001 Water-cooled secondary connection cables for resistance welding-Part 3:Test requirements
- KS C ISO 8205-3:2015 Water-cooled secondary connection cables for resistance welding－Part 3：Test requirements
- KS C IEC 60512-2-2:2009 Connectors for electronic equipment-Tests and measurements-Part 2-2:Electrical continuity and contact resistance tests-Test 2b:Contact resistance-Specified test current method
- KS C IEC 60512-2-2:2014 Connectors for electronic equipment－Tests and measurements－Part 2-2：Electrical continuity and contact resistance tests－Test 2b：Contact resistance－Specified test current method
- KS C IEC 60512-2-3:2008 Connectors for electronic equipment-Tests and measurements-Part 2-3:Electrical continuity and contact resistance tests-Test 2c:Contact resistance variation
- KS C IEC 60512-2-3:2014 Connectors for electronic equipment-Tests and measurements-Part 2-3:Electrical continuity and contact resistance tests-Test 2c:Contact resistance variation
- KS C IEC 60345:2002 Method of test for electrical resistance and resistivity of insulating materials at elevated temperatures
- KS C IEC 60512-2-1:2008 Connectors for electronic equipment-Tests and measurements-Part 2-1:Electrical continuity and contact resistance tests-Test 2a:contact resistance-Millivolt level method
- KS C IEC 60512-2-1:2014 Connectors for electronic equipment－Tests and measurements－Part 2-1：Electrical continuity and contact resistance tests－Test 2a：contact resistance－Millivolt level method
- KS C 6424-1999 Test methods of potentiometers for use in electronic equipment
- KS C 6424-1989 Test methods of potentiometers for use in electronic equipment
- KS C 6424-1986 Test methods of potentiometers for use in electronic equipment
- KS C IEC 60332-1-2002(2012) Tests on electric cables under fire conditions－Part 1：Test on a single vertical insulated wire or cable
- KS B ISO 14273:2021 Resistance welding — Destructive testing of welds— Specimen dimensions and procedure for tensile shear testing resistance spot and embossed projection welds
- KS B ISO 14273:2016 Specimen dimensions and procedure for shear testingresistance spot and embossed projection welded joints
- KS C 1004-1997 Testing method for thermo-electromotive force of metallic resistance materials
- KS C 6429-2001 TEST METHODS OF FIXED RESISTORS FOR ELECTRONIC EQUIPMENT
- KS C 6429-1997 TEST METHODS OF FIXED RESISTORS FOR ELECTRONIC EQUIPMENT
- KS C 1004-1997(2022) Testing method for thermo-electromotive force of metallic resistance materials
- KS C 1004-1982 Testing method for thermo-electromotive force of metallic resistance materials
- KS W 0926-2014 Environmental tests for aircraft equipment - Insulation resistance and high voltage tests for electrical equipment
- KS B ISO 14272:2021 Resistance welding — Destructive testing of welds— Specimen dimensions and procedure for cross tension testing of resistance spot and embossed projection welded joints
- KS B ISO 14272:2016 Specimen dimensions and procedure for cross tension testingresistance spot and embossed projection welded joints
- KS C 2129-2004 TESTING METHODS FOR DC RESISTANCE OR CONDUCTANCE OF INSULATING MATERIALS
- KS C ISO 14270:2022 Resistance welding — Destructive testing of welds — Specimen dimensions and procedure for mechanized peel testing resistance spot, seam and embossed projection welds
- KS W 0926-1997(2012) Environmental tests for aircraft equipment - Insulation resistance and high voltage tests for electrical equipment
- KS C 2608-2013 Testing method of electrical resistance-temperature characteristics of metallic resistance materials
- KS C 2608-1980 Testing method of electrical resistance-temperature characteristics of metallic resistance materials
- KS L 2109-2006 Measuring methods of surface resistivity for glass substrates
- KS C 2712-2001(2021) Test methods of negative temperature coefficient thermistor
- KS D 0403-1998(2018) Routine test of resistance spot and projection welds
- KS C IEC 61482-1-2005(2010) Liver working－Flame－resistant materials for clothing for thermal protection of workers－Thermal hazards of an electric arc－Part 1：Test methods
Japanese Industrial Standards Committee (JISC), Wire Flame Retardancy Test
- JIS C 3521:1986 Flame test method for flame retardant sheath of telecommunication cables
- JIS C 3612:2002 600V Flame retardant polyethylene insulated wires
- JIS C 3612 AMD 1:2022 600 V Flame retardant polyethylene insulated wires (Amendment 1)
- JIS K 6324:1994 Flame resistant conveyor belts -- Classification and test methods
- JIS C 2525:1994 Testing method for conductor-resistance and resistivity of metallic resistance materials
- JIS C 1301:1977 Insulation resistance testers (magneto generator operated)
- JIS C 5402-2-2:2005 Connectors for electrical equipment -- Tests and measurements -- Part 2-2: Electrical continuity and contact resistance tests -- Test 2b: Contact resistance -- Specified test current method
- JIS C 2526:1994 Testing method for electrical resistance-temperature characteristics of metallic resistance materials
- JIS C 5402-2-3:2005 Connectors for electronic equipment -- Tests and measurements -- Part 2-3: Electrical continuity and contact resistance tests -- Test 2c: Contact resistance variation
- JIS C 5402-2-1:2005 Connectors for electronic equipment -- Tests and measurements -- Part 2-1: Electrical continuity and contact resistance tests -- Test 2a : Contact resistance -- Millivolt level method
- JIS T 8022:2006 Protective clothing -- Protection against heat and flame -- Method of test for limited flame spread
- JIS K 7114:1995 Testing method for evaluation of the resistance of plastics to chemical substances
- JIS C 5202:1990 Test methods of fixed resistors for electronic equipment
- JIS C 3665-1-1:2007 Tests on electric and optical fibre cables under fire conditions -- Part 1-1: Test for vertical flame propagation for a single insulated wire or cable -- Apparatus
Military Standard of the People's Republic of China-General Armament Department, Wire Flame Retardancy Test
- GJB 17.5-1984 Test methods for aviation wires and cables Surface resistance test
- GJB 17.18-1984 Test methods for aviation wires and cables Combustion test
- GJB 360.33-1987 Test methods for electronic and electrical components Contact resistance testing
- GJB 360.29-1987 Test methods for electronic and electrical components DC resistance test
- GJB 360.28-1987 Test methods for electronic and electrical components Insulation resistance test
- GJB 360.35-1987 Test methods for electronic and electrical components Resistance voltage coefficient test
- GJB 360.30-1987 Test methods for electronic and electrical components Resistance-temperature characteristics test
- GJB 17.2-1984 Test methods for aviation wires and cables Voltage test
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Wire Flame Retardancy Test
- GB/T 3048.16-1994 Test methods for determining electrical properties of electric cables and wires.Surface resistance test
- GB/T 19666-2005 Flame retardant and fire resistant wires and cables
- GB/T 3048.4-1994 Test methods for determining electrical properties of electric cables and wires.Measurement of D.C. resistance of conductors
- GB/T 17658-1999 Test of burning behaviour for flame retardant treated wood--Method of test for fire propagation
- GB/T 12666.2-1990 Test method on electric wires or cables under fire conditions--Part 2:Test on a single vertical insulated wire or cable
- GB/T 12666.4-1990 Test method on electric wires or cables under fire conditions--Part 4:Test on a single slanting insulated wire or cable
- GB/T 12666.3-1990 Test method on electric wires or cables under fire conditions--Part 3:Test on a single horitontal insulated wire or cable
- GB/T 3048.6-1994 Test methods for determining electrical properties of electric cables and wires.Determining insulation resistance.Voltmeter-ammeter method
- GB/T 32129-2015 Halogen free low smoke and flame-retardant compounds for wires and cables
- GB/T 3048.16-2007 Test methods for electrical properties of electric cables and wires.Part 16: Surface resistance test
- GB/T 3048.5-2007 Test methods for electrical properties of electric cables and wires.Part 5: Test of insulation resistance
- GB/T 3048.2-1994 Test methods for determining electrical properties of electric cables and wires.Measurement of resistivity of metallic conductive materials
- GB/T 12666.1-2008 Test method on a single wire or cable under fire conditions.Part1:Vertical specimen flame test
- GB/T 12666.2-2008 Test method on a single wire or cable under fire conditions.Part2:Horizontal specimen flame test
- GB/T 12666.3-2008 Test method on a single wire or cable under fire conditions.Part 3:Slanting specimen flame test
- GB/T 14656-1993 Test method for burning behaviour of flame-retardant paper and board
- GB/T 14656-2009 Test method for burning behavior of flame-retardant paper and board
- GB/T 3048.4-2007 Test methods for electrical properties of electric cables and wires.Part 4: Test of DC resistance of conductors
- GB/T 3048.5-1994 Test methods for determining electrical properties of electric cables and wires.Determining insulation resistance.Comparison-galvanometer method
- GB/T 3048.2-2007 Test methods for electrical properties of wires and cables - Part 2: Tests for resistivity of metallic materials
- GB/T 3048.3-1994 Test methods for determining electrical properties of electric cables and wires.Measurement of volumeresistivity of semi-conducting rubbers and plastics
- GB/T 12666.1-1990 Test method on electric wires or cables under fire conditions--Part 1:General
- GB/T 3048.3-2007 Test methods for electrical properties of electric cables and wires.Part 3: Test of volume resistivity of semi-conducting rubbers and plastics
- GB/T 18380.3-2001 Tests on electric cables under fire conditions Part 3: Test on bunched wires or cables
- GB/T 19248-2003 Test method for measuring the resistance of package leads
- GB/T 12631-1990 Test method for resistance of conductor of printed boards
- GB/T 18380.1-2001 Tests on electric cables under fire conditions Part 1: Test on a single vertical insulated wire or cable
- GB/T 10581-2006 Method of test for electrical resistance and resistivity of insulating materials at elevated temperatures
- GB/T 18380.2-2001 Tests on electric cables under fire conditions Part 2: Test on a single amall vertical insulated copper wire or cable
- GB/T 41708-2022 Test method for resistivity of glass melts
- GB/T 22043-2008 Clothing.Electrostatic properties.Test method for measurement of the electrical resistance through a material(vertical resistance)
- GB/T 1410-2006 Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials
- GB/T 1410-1989 Methods of test for volume resistivity and surface resistivity of solid insulating materials
- GB/T 15064.3-1994 Method for resistivity of colloidal graphite for kinescope
- GB/T 10066.4-1988 Test methods for electroheat installations--Indirect resistance furnaces
- GB/T 14342-1993 Testing method for specific resistance of synthetic staple fibres
- GB/T 6102.2-2012 Test method for moisture regain in raw cotton.Electrical resistance meter
- GB/T 13300-1991 High resistance alloys for electrical hearting.Testing method for accelerated life
- GB/T 18380.13-2008 Burning tests on electric and optical cables under flame conditions - Part 13: Test method for the determination of burning drips/particles by the vertical flame spread test for single insulated wires and cables
- GB/T 5441.4-1985 Test methods for communication cable--Impedance and impedance irregularities test of coaxial pair--Pulse method
- GB/T 12476.9-2010 Electrical apparatus for use in the presence of combustible dust.Part 9:Test methods.Methods for determining the electrical resistivity of dust in layers
- GB 12476.9-2010 Electrical apparatus for use in the presence of combustible dust.Part 9:Test methods.Methods for determining the electrical resistivity of dust in layers
- GB/T 18380.11-2008 Tests on electric and optical fibre cables under fire conditions.Part 11: Test for vertical flame propagation for a single insulated wire or cable.Apparatus
- GB/T 18380.21-2008 Tests on electric and optical fibre cables under fire conditions.Part 21:Test for vertical flame propagation for a single small insulated wire or cable.Apparatus
- GB/T 3048.7-1994 Test methods for determining electrical properties of electric cables and wires.Tracking resistance test
- GB/T 3048.9-1994 Test methods for determining electrical properties of electric cables and wires.A.C. spark test of insulated cores
Group Standards of the People's Republic of China, Wire Flame Retardancy Test
- T/HLJZX 001-2022 Flame retardant polyethylene wire and cable sleeve
- T/YGWCA 01-2022 Flame retardant soft polyvinyl chloride plastics for wire and cable
- T/CAS 529-2021 Test methods of conductor DC resistance for short samples of electric cables and wires
- T/SHPTA 023.1-2022 Flame-retardant polyethylene compounds for wire and cable Part 1：Flame-retardant polyethylene oversheathing compounds for power cable
- T/SHPTA 006-2021 Soft polyvinyl chloride flame retardant sheathing material for wire and cable
- T/GDWCA 0082-2022 General rules for B1 Halogen free low smoke flame retardant and fire resistant wires and cables
- T/GDWCA 0084-2022 Burning behavior grade B1 halogen free low smoke and flame-retardant insulation compounds for wires and cables
- T/GDWCA 0083-2022 Burning behavior grade B1 halogen free low smoke and flame-retardant sheathing compounds for wires and cables
- T/JMBX 0224-2022 Test method for flame retardancy of finished non-metallic parts of electric bicycles
- T/SHPTA 052-2023 Irradiation cross-linked halogen-free flame retardant cable material for 150 °Cautomotive wires
- T/CPCIF 0194-2022 The anti-blooming test of powder flame retardants in thermoplastics
- T/FQIA 001-2022 Polyvinyl chloride insulated flame retardant and fire resistant electric cables and wires with rated voltage up to and including 450/750 V
- T/CITS 015-2023 PVC insulated flame-retardant and fire-resistant cables and wires with rated voltage of 450/750V and below
- T/ZZB 0410-2018 Anti-dripping halogen free low smoke and flame-retardant thermoplastic polyolefin sheathing compounds for wires and cables
- T/LJQ 0006-2022 Assessment requirements for quality grading and forerunner-flame retardant and fire resistant electric wires and cables of special material
- T/FJAS 024-2023 Fuel cell electric vehicles thermal balance test method for fuel cell systems
International Organization for Standardization (ISO), Wire Flame Retardancy Test
- ISO 15025:2000 Protective clothing - Protection against heat and flame - Method of test for limited flame spread
- ISO 340:1988 Conveyor belts; flame retardation; specifications and test method
- ISO 340:2022 Conveyor belts — Laboratory scale flammability characteristics — Requirements and test method
- ISO 16392:2007 Tyres - Electrical resistance - Test method for measuring electrical resistance of tyres on a test rig
- ISO 16392:2017 Tyres - Electrical resistance - Test method for measuring electrical resistance of tyres on a test rig
- ISO 17654:2011 Resistance welding - Destructive tests of welds - Pressure test of resistance seam welds
- ISO 340:1982 Flame retardation of conveyor belts — Specifications and method of test
- ISO 10447:2022 Resistance welding — Testing of welds — Peel and chisel testing of resistance spot and projection welds
- ISO 8205-3:2012 Water-cooled secondary connection cables for resistance welding - Part 3: Test requirements
- ISO 8205-3:1993 Water-cooled secondary connection cables for resistance welding; part 3: test requirements
- ISO 340:2004 Conveyor belts - Laboratory scale flammability characteristics - Requirements and test method
- ISO 340:2013 Conveyor belts - Laboratory scale flammability characteristics - Requirements and test method
- ISO 17654:2003 Destructive tests on welds in metallic materials - Resistance welding - Pressure test on resistance seam welds
German Institute for Standardization, Wire Flame Retardancy Test
- DIN 46453-6:1986-07 Winding wires; resistance wires, test method of the temperature coefficient of the direct current resistance
- DIN VDE 0472-512:1985 Testing of cables, wires and flexible cords; resistance between protective conductor and semi-conductive layer
- DIN EN 60512-20-2:2001 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 20-2: Test: 20b: Flammability tests; Fireproofness (IEC 60512-20-2:2000); German version EN 60512-20-2:2000
- DIN 46453-6:1986 Winding wires; resistance wires, test method of the temperature coefficient of the direct current resistance
- DIN EN ISO 17654:2011-12 Resistance welding - Destructive tests of welds - Pressure test of resistance seam welds (ISO 17654:2011); German version EN ISO 17654:2011
- DIN EN ISO 17653:2012-08 Resistance welding - Destructive tests on welds in metallic materials - Torsion test of resistance spot welds (ISO 17653:2012); German version EN ISO 17653:2012
- DIN EN 60512-2-2:2004 Connectors for electronic equipment - Tests and measurements - Part 2-2: Electrical continuity and contact resistance tests - Test 2b: Contact resistance - Specified test current method (IEC 60512-2-2:2003); German version EN 60512-2-2:2003
- DIN EN 2310:1991-09 Aerospace series; test methods for the flame resistance rating of non-metallic materials; german version EN 2310:1991
- DIN EN 60512-21-1:2010 Connectors for electronic equipment - Tests and measurements - Part 21-1: R.F. resistance tests - Test 21a: R.F. shunt resistance (IEC 60512-21-1:2010); German version EN 60512-21-1:2010
- DIN EN 60695-2-11:2001 Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods; Glow-wire flammability test method for end-products (IEC 60695-2-11:2000); German version EN 60695-2-11:2001
- DIN EN 61241-2-2:1996 Electrical apparatus for use in the presence of combustible dust - Part 2: Test methods - Section 2: Method for determining the electrical resistivity of dust in layers (IEC 61241-2-2:1993 + Corrigendum 1994); German version EN 61241-2-2:1995
Professional Standard - Aerospace, Wire Flame Retardancy Test
- QJ 1323.21-1987 Electromagnetic Relay Test Method Coil Resistance Test
- QJ 936-1985 Low level contact resistance test method
- QJ 1323.20-1987 Electromagnetic relay test method Insulation resistance test
- QJ 1323.22-1987 Electromagnetic relay test method contact resistance (static) test
- QJ 1238.16-1987 Insulation resistance test of cable test method on missile launch vehicle
NL-NEN, Wire Flame Retardancy Test
Canadian General Standards Board （CGSB), Wire Flame Retardancy Test
British Standards Institution (BSI), Wire Flame Retardancy Test
- BS EN 60512-21-1:2010 Connectors for electronic
equipment. Tests and
measurements.
Part 21-1: R.F. resistance tests. Test 21a:
R.F. shunt resistance
- BS EN ISO 8205-3:2012 Water-cooled secondary connection cables for resistance welding. Test requirements
- BS EN 2310:1991 Test methods for the flame resistance rating of non-metallic materials
- BS ISO 16392:2007 Tyres - Electrical resistance - Test method for measuring electrical resistance of tyres on a test rig
- BS EN 60512-2-2:2003 Connectors for electronic equipment - Tests and measurements - Electrical continuity and contact resistance tests - Test 2b - Contact resistance - Specified test current method
- BS EN 60512-2-3:2002 Connectors for electronic equipment - Tests and measurements - Electrical continuity and contact resistance tests - Test 2c - Contact resistance variation
- BS ISO 16392:2017 Tracked Changes. Tyres. Electrical resistance. Test method for measuring electrical resistance of tyres on a test rig
- BS 3466:1962 Methods of test for resistance per unit length of metallic electrical resistance material
- BS EN ISO 17654:2011 Resistance welding. Destructive tests of welds. Pressure test of resistance seam welds
- BS 3467:1962 Method of test for temperature coefficient of resistance of alloy wire for precision resistors
- BS EN ISO 340:2013 Conveyor belts. Laboratory scale flammability characteristics. Requirements and test method
- BS EN 60512-2-1:2002 Connectors for electronic equipment - Tests and measurements - Electrical continuity and contact resistance tests - Test 2a - Contact resistance - Millivolt level method
- BS EN 50289-1-2:2001 Communication cables - Specifications for test methods - Electrical test methods - DC resistance - d.c.resistance
- BS EN 50289-1-11:2002 Communication cables - Specifications for test methods - Electrical test methods - Characteristic impedance, input impedance, return loss
- BS EN 60512-3-1:2002 Connectors for electronic equipment - Tests and measurements - Insulation tests - Test 3a - Insulation resistance
- BS EN 62567:2013 Overhead lines. Methods for testing self-damping characteristics of conductors
- BS EN ISO 10447:2015 Resistance welding. Testing of welds. Peel and chisel testing of resistance spot and projection welds
- BS EN 60512-20-3:2010 Connectors for electronic
equipment. Tests and
measurements.
Part 20-3: Fire hazard tests. Test 20c:
Flammability, glow-wire
- BS 6233:1982 Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials
- BS EN 60695-2-11:2001 Fire hazard testing - Test methods - Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products
- BS EN 60695-2-11:2014 Fire hazard testing. Glowing/hot-wire based test methods. Glow-wire flammability test method for end-products (GWEPT)
- BS EN 60512-19-1:2010 Connectors for electronic equipment - Tests and measurements - Chemical resistance tests - Test 19a - Fluid resistance of pre-insulated crimp barrels
- BS EN 2591-707:2001 Elements of electrical and optical connection - Test methods - Electrical elements - Measurement of characteristic impedance of a bus or a stub terminator
- BS PD IEC/TS 62282-7-1:2017 Fuel cell technologies. Test methods. Single cell performance tests for polymer electrolyte fuel cells (PEFC)
- BS EN 61340-2-3:2000 Electrostatics. Methods of test for determining the resistance and resistivity of solid planar materials used to avoid electrostatic charge accumulation. Section 3: Methods of test for determining the resistance and resistivity of solid planar materials u
Indonesia Standards, Wire Flame Retardancy Test
- SNI 08-7180-2006 Test methods of flame resistance on carpets - Tablet tests
- SNI 04-6189-1999 Measurements of winding resistance of an alternating current machines during operation at alternating voltage
Professional Standard - Public Safety Standards, Wire Flame Retardancy Test
- GA/T 537-2005 Flame-retardant、fire-proof、fire resistance specifications of testing method of busbar trunking system (busways)
- GA/T 42.1-1992 Test method for combustion performance of fire retardant wood wood stack method
- GA/T 42.2-1992 Test method for combustion performance of flame retardant wood by fire tube method
- GA 495-2004 Specification of flame-retardant floor-covering
应急管理部, Wire Flame Retardancy Test
- XF/T 537-2005 Test methods for flame retardant, fireproof and fire-resistant properties of busbar trunk systems (busbar ducts)
- XF 495-2004 Performance requirements and test methods for flame retardant floor covering materials
Society of Automotive Engineers (SAE), Wire Flame Retardancy Test
- SAE J1495-2005 Test Procedure for Battery Flame Retardant Venting Systems
- SAE J1495-2013 Test Procedure for Battery Flame Retardant Venting Systems
- SAE J1495-1992 Test Procedure for Battery Flame Retardant Venting Systems
- SAE J1495-1998 Test Procedure for Battery Flame Retardant Venting Systems
Professional Standard - Railway, Wire Flame Retardancy Test
- TB/T 2364-1993 Test method for resistance braking performance of diesel locomotives
- TB/T 2367-1993 Test method for starting resistance of electric and diesel locomotives
- TB/T 2249-1996 Test method for insulation resistance of railway passenger car electric wiring
- TB/T 2380-1993 Water resistance test method for diesel locomotive
- TB/T 2381-1993 Diesel locomotive line running test
- TB/T 2514-1995 Electric locomotive resistance test method
- TB/T 2381-2017 Route running test before delivery for diesel locomotive
- TB/T 2078-2006 Technical specifications for water. resistance loaded test equipment of diesel electric locomotive
- TB/T 2514-2014 Resistance test methods for electrical locomotive and EMU
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Wire Flame Retardancy Test
- GB/T 33101-2016 Dipped flame-resistant canvas—Test methods of burning character
- GB/T 35497-2017 Rubber shoes—Test method of flame retardant performance for rubber shoes material
- GB/T 12631-2017 Test method for resistance of conductors of printed boards
国家市场监督管理总局、中国国家标准化管理委员会, Wire Flame Retardancy Test
- GB/T 17658-2018 Test of burning behavior for flame retardant treated wood—Method of test for fire propagation
- GB/T 19666-2019 General rules for flame retardant and fire resistant electric wires and cables or optical fiber cables
- GB/T 18380.13-2022 Tests on electric and optical fibre cables under fire conditions—Part 13:Test for vertical flame propagation for a single insulated wire or cable—Procedure for determination of flaming droplets/particles
- GB/T 18380.11-2022 Tests on electric and optical fibre cables under fire conditions—Part 11:Test for vertical flame propagation for a single insulated wire or cable—Apparatus
Shanghai Provincial Standard of the People's Republic of China, Wire Flame Retardancy Test
- DB31/ 65-1991 Test method for flame retardant performance of wallpaper
- DB31/ 571-1992 Test method for flame retardant properties of carpets 45° burning method
- DB31/ 570-1992 Test method for flame retardant properties of carpets Vertical combustion method
- DB31/ 572-1992 Test method for flame retardant properties of carpets - Horizontal combustion method
- DB31/ 149-1994 Safety standard for flame retardant semi-rigid polyethylene wire conduit for buildings
Professional Standard - Machinery, Wire Flame Retardancy Test
- JB/T 10436-2004 Cross-linkable flame-retar dant polyolefin compounds for wire and cable
- JB/T 4279.2-1994 Enamelled winding wire test equipment verification method DC resistance test device
- JB/T 7900-2002 Standard test method for change of resistance with temperature of high resistance alloys for electrical heating
- JB/T 4278.5-1993 Rubber plastic wire and cable test equipment verification method single wire and cable vertical combustion DZ-1 method test device
- JB/T 4279.2-2008 Verification procedure for test equipment of enamelled winding wire.Part 2:DC electrical resistance tester
- JB/T 4278.5-2011 Verification procedure for test equipment of rubber plastic wire and cable.Part 5: Single insulated wire and cable vertical burning test device
- JB/T 5540-1991 DC high resistance resistor. Test method
- JB/T 4278.18-2011 Verification procedure for test equipment of rubber plastic wire and cable.Part 18: Copper single insulated wire and cable vertical burning test device
- JB/T 8537-1997 Laboratory test method of dust specific electric resistance
- JB/T 8537-2010 Testing method for dust resistivity in lab
- JB/T 8537-2023 Testing method for dust resistivity in laboratory
- JB/T 4278.15-2011 Verification procedure for test equipment of rubber plastic wire and cable.Part 15: Bundle burning test device
- JB/T 12254-2015 Test method for resistivity of brush and contacts with the micro motor
- JB/T 6773-1993 Test method of resistivity of metal-graphite products
工业和信息化部, Wire Flame Retardancy Test
- JB/T 10436-2022 Cross-linkable flame retardant polyolefin materials for wires and cables
- SJ/T 2932-2016 Flame retardant PVC insulated installation wire and cable
- SJ/T 11627-2016 On-line testing method of silicon wafer resistivity for solar cells
Institute of Electrical and Electronics Engineers (IEEE), Wire Flame Retardancy Test
- IEEE 817-1993 Test procedure for flame-retardant coatings applied to insulated cables in cable trays
- IEEE Std C62.33-1982 Test specifications for varistor surge-protective devices
KR-KS, Wire Flame Retardancy Test
- KS C IEC 60332-3-21-2003(2023)
- KS C 2608-2013(2023) Testing method of electrical resistance-temperature characteristics of metallic resistance materials
- KS C IEC 62567-2022 Overhead lines — Methods for testing self-damping characteristics of conductors
- KS C IEC 60512-2-2-2009 Connectors for electronic equipment－Tests and measurements－Part 2-2：Electrical continuity and contact resistance tests－Test 2b：Contact resistance－Specified test current method
- KS B ISO 10447-2009 Resistance welding－Peel and chisel testing of resistance spot and projection welds
- KS C IEC 60512-2-3-2008 Connectors for electronic equipment－Tests and measurements－Part 2-3：Electrical continuity and contact resistance tests－Test 2c：Contact resistance variation
- KS C IEC 60512-2-1-2008 Connectors for electronic equipment－Tests and measurements－Part 2-1：Electrical continuity and contact resistance tests－Test 2a：contact resistance－Millivolt level method
- KS B ISO 14273-2021 Resistance welding — Destructive testing of welds— Specimen dimensions and procedure for tensile shear testing resistance spot and embossed projection welds
- KS B ISO 14272-2021 Resistance welding — Destructive testing of welds— Specimen dimensions and procedure for cross tension testing of resistance spot and embossed projection welded joints
- KS K ISO 14460-2012(2022) Protective clothing for automobile racing drivers－Protection against heat and flame－Performance requirements and test methods
- KS C ISO 14270-2022 Resistance welding — Destructive testing of welds — Specimen dimensions and procedure for mechanized peel testing resistance spot, seam and embossed projection welds
IPC - Association Connecting Electronics Industries, Wire Flame Retardancy Test
YU-JUS, Wire Flame Retardancy Test
- JUS N.C9.001-1980 High-voltage connecting wire with flame retarding insulation for use in television receivers
- JUS N.C0.036-1980 Testing offlexible cords and cables. Measurements ofinsulation resistance, resistance of semi-conducting layers and surface resistance.
- JUS N.R4.468-1978 Electromechanical components for dectronic equipment. Test methods. Test 17c: Cable clamp, resistance to cable pull (tensUe)
- JUS N.C0.041-1984 Testing ofcables and flexible cords. Resistance to direct voltage
- JUS N.R3.021-1981 Fixed low povver non-wirewound resistors. Selection of methods of test and general reguirements
- JUS N.C0.050-1984 Electrical power andlighting. Tests of insulatedconductors and cables. I/Vear resistance
IN-BIS, Wire Flame Retardancy Test
CZ-CSN, Wire Flame Retardancy Test
Taiwan Provincial Standard of the People's Republic of China, Wire Flame Retardancy Test
- CNS 7126-1986 Method of Test of High-Voltage Resistance Cables for Automobiles
- CNS 8659-1982 Method of Test for Conductor - Resistance and Resistivity of Metallic Resistance Materials
- CNS 13277-1993 Method of Test for Cold Filter Plugging Point of Distillate Fuels
- CNS 8660-1982 Method of Test for Electrical Resistance-Temperature Characteristics of Metallic Resistance Materials
- CNS 685-1980 Testing Standard for D. C. Resistance of Insulated Conductors
- CNS 15111-2007 Methods of test for electrical conductivity and resistivity of water
- CNS 3635-1985 Insulation Resistance Testing Method for Electronic Components
- CNS 8661-1982 Method of Test for Thermo - Electromotive Force of Metallic Resistance Materials
- CNS 15130-3-10-2007 Tests on electric cables under fire conditions - Part 3-10 : Test for vertical flame spread of vertically-mounted bunched wires or cables - Apparatus
- CNS 15130-3-22-2007 Tests on electric cables under fire conditions - Part 3-22 : Test for vertical flame spread of vertically-mounted bunched wires or cables - Category A
- CNS 15130-3-23-2007 Tests on electric cables under fire conditions - Part 3-23 : Test for vertical flame spread of vertically-mounted bunched wires or cables - Category B
- CNS 15130-3-24-2007 Tests on electric cables under fire conditions - Part 3-24 : Test for vertical flame spread of vertically-mounted bunched wires or cables - Category C
- CNS 15130-3-25-2007 Tests on electric cables under fire conditions - Part 3-25 : Test for vertical flame spread of vertically-mounted bunched wires or cables - Category D
Association Francaise de Normalisation, Wire Flame Retardancy Test
- NF C42-160-2*NF EN 60477-2:1998 Laboratory resistors. Part 2 : laboratory a.c. resistors.
- NF A82-020:1985 Electric resistance welding. Machines for electric resistance welding. Specifications and tests.
- NF T47-108:1993 Conveyor belts. Flame retardation. Specifications and test method.
- NF R12-751:2008 Tyres - Electrical resistance - Test method for measuring electrical resistance of tyres on a test rig.
- NF A82-046:1999 Electric resistance welding - Characterization of resistance welding electrodes - Test procedure
- NF C42-160*NF EN 60477:1998 Laboratory d.c. resistors.
- NF A82-111:1989 Electric resistance welding. Low impedance cables. Sizes, specifications and tests.
- NF A82-025:1986 Electric resistance welding. Machines for electric resistance welding with rectified current. Specifications and tests.
- NF A89-574*NF EN ISO 17654:2011 Resistance welding - Destructive tests of welds - Pressure test of resistance seam welds
- NF EN ISO 17653:2012 Soudage par résistance - Essais destructifs des soudures sur matériaux métalliques - Essai de torsion de soudure par résistance par points
- NF A82-112-3:1996 Water-cooled secondary connection cables for resistance welding. Part 3 : test requirements.
- NF EN 4057-302:2007 Série aérospatiale - Frettes de câblage pour harnais - Méthodes d'essais - Partie 302 : tenue à la flamme
- NF C93-400-2-2*NF EN 60512-2-2:2003 Connectors for electronic equipment - Tests and measurements - Part 2-2 : electrical continuity and contact resistance tests - Test 2b : contact resistance - Specified test current method.
- NF C26-915:1967 TEST METHODS FOR INSULATING VARNISHES. VOLUME RESISTIVITY AND SURFACE RESISTIVITY.
- NF EN 62567:2014 Lignes électriques aériennes - Méthodes d'essai des caractéristiques d'auto-amortissement des conducteurs
- NF T47-108*NF EN ISO 340:2013 Conveyor belts - Laboratory scale flammability characteristics - Requirements and test method
- NF C93-400-21-1*NF EN 60512-21-1:2011 Connectors for electronic equipment - Tests and measurements - Part 21-1 : R.F. resistance tests - Test 21a : R.F. shunt resistance.
- NF A82-045:1986 Electric resistance welding. Rectifier equipment for resistance welding machines. Specifications and tests.
- NF C93-400-20-3*NF EN 60512-20-3:2011 Connectors for electronic equipment - Tests and measurements - Part 20-3 : fire hazard tests - Test 20c : flammability, glow-wire
- NF C93-400-2-1*NF EN 60512-2-1:2002 Connectors for electronic equipment - Tests and measurements - Part 2-1 : electrical continuity and contact resistance tests - Test 2a : contact resistance - Millivolt level method
- NF C93-400-2-3*NF EN 60512-2-3:2002 Connectors for electronic equipment - Tests and measurements - Part 2-3 : electrical continuity and contact resistance tests - Test 2c : contact resistance variation
- NF C34-567*NF EN 62567:2014 Overhead lines - Methods for testing self-damping characteristics of conductors
- NF C26-215:1982 Method of testing insulating materials. Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials.
- XP P18-481:2022 Essai sur béton durci - Mesure de la résistivité électrique
- NF A89-566*NF EN ISO 14329:2004 Resistance welding - Destructive tests of welds - Failure types and geometric measurements for resistance spot, seam and projection welds
- NF A89-570*NF EN ISO 14273:2016 Resistance welding - Destructive testing of welds - Specimen dimensions and procedure for tensile shear testing resistance spot and embossed projection welds
- NF EN ISO 14272:2016 Soudage par résistance - Essais destructifs des soudures - Dimensions des éprouvettes et mode opératoire pour l'essai de traction en croix des soudures par résistance par points et par bossages
- NF EN ISO 14323:2015 Soudage par résistance - Essais destructifs des soudures - Dimensions des éprouvettes et mode opératoire pour les essais de cisaillement par choc et les essai de traction par choc sur éprouvettes en croix des soudures par résistance par points et ...
- NF A89-569*NF EN ISO 14272:2016 Resistance welding - Destructive testing of welds - Specimen dimensions and procedure for cross tension testing of resistance spot and embossed projection welds
Danish Standards Foundation, Wire Flame Retardancy Test
- DS/EN ISO 17654:2011 Resistance welding - Destructive tests of welds - Pressure test of resistance seam welds
- DS/EN 13087-7/A1:2002 Protective helmets - Test methods - Part 7: Flame resistance
- DS/EN 13087-7:2000 Protective helmets - Test methods - Part 7: Flame resistance
- DS/EN ISO 17653:2012 Resistance welding - Destructive tests on welds in metallic materials - Torsion test of resistance spot welds
- DS/ISO 340:1983 Flame retardation of conveyor belts. Specifications and method of test
- DS/EN 60512-2-2:2003 Connectors for electronic equipment - Tests and measurements - Part 2-2: Electrical continuity and contact resistance tests - Test 2b: Contact resistance - Specified test current method
- DS/EN 60512-2-1:2002 Connectors for electronic equipment - Tests and measurements - Part 2-1: Electrical continuity and contact resistance tests - Test 2a: Contact resistance - Millivolt level method
- DS/IEC 512-9:1988 Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 9: Cable-clamping tests, explosion hazard tests, chemical resistance tests, shielding and filtering an dmagnetic interference tests
American Society for Testing and Materials (ASTM), Wire Flame Retardancy Test
- ASTM D6413/D6413M-22 Standard Test Method for Flame Resistance of Textiles (Vertical Test)
- ASTM F1958/F1958M-99(2010) Standard Test Method for Determining the Ignitability of Non-flame-Resistant Materials for Clothing by Electric Arc Exposure Method Using Mannequins
- ASTM D5664-10 Standard Test Method for Evaluating the Effects of Fire-Retardant Treatments and Elevated Temperatures on Strength Properties of Fire-Retardant Treated Lumber
- ASTM D1360-98(2004) Standard Test Method for Fire Retardancy of Paints (Cabinet Method)
- ASTM D1360-98 Standard Test Method for Fire Retardancy of Paints (Cabinet Method)
- ASTM D1360-98(2011) Standard Test Method for Fire Retardancy of Paints (Cabinet Method)
- ASTM D6194-97 Standard Test Method for Glow-Wire Ignition of Materials
- ASTM D6194-08 Standard Test Method for Glow-Wire Ignition of Materials
- ASTM D1169-19 Standard Test Method for Specific Resistance (Resistivity) of Electrical Insulating Liquids
- ASTM D1169-19a Standard Test Method for Specific Resistance (Resistivity) of Electrical Insulating Liquids
- ASTM D116-86(2011) Standard Test Methods for Vitrified Ceramic Materials for Electrical Applications
- ASTM D1169-09 Standard Test Method for Specific Resistance (Resistivity) of Electrical Insulating Liquids
- ASTM D1169-11 Standard Test Method for Specific Resistance (Resistivity) of Electrical Insulating Liquids
- ASTM D5664-99 Standard Test Method for Evaluating the Effects of Fire-Retardant Treatments and Elevated Temperatures on Strength Properties of Fire-Retardant Treated Lumber
- ASTM D5664-01a Standard Test Method for Evaluating the Effects of Fire-Retardant Treatments and Elevated Temperatures on Strength Properties of Fire-Retardant Treated Lumber
- ASTM D5664-02 Standard Test Method for Evaluating the Effects of Fire-Retardant Treatments and Elevated Temperatures on Strength Properties of Fire-Retardant Treated Lumber
- ASTM D5664-08 Standard Test Method for Evaluating the Effects of Fire-Retardant Treatments and Elevated Temperatures on Strength Properties of Fire-Retardant Treated Lumber
- ASTM B84-90(2001) Standard Test Method for Temperature-Resistance Constants of Alloy Wires for Precision Resistors
- ASTM B84-90(1995)e1 Standard Test Method for Temperature-Resistance Constants of Alloy Wires for Precision Resistors
- ASTM B84-07(2019) Standard Test Method for Temperature-Resistance Constants of Alloy Wires for Precision Resistors
- ASTM D7936-20 Standard Test Method for Flammability of Electrical Insulating Materials Intended for Wires or Cables When Burning in Horizontal Configuration
- ASTM B63-90(2001) Standard Test Method for Resistivity of Metallically Conducting Resistance and Contact Materials
- ASTM B63-90(1995)e1 Standard Test Method for Resistivity of Metallically Conducting Resistance and Contact Materials
- ASTM D3936-11 Standard Test Method for Resistance to Delamination of the Secondary Backing of Pile Yarn Floor Covering
- ASTM D3936-12 Standard Test Method for Resistance to Delamination of the Secondary Backing of Pile Yarn Floor Covering
- ASTM E644-11(2019) Standard Test Methods for Testing Industrial Resistance Thermometers
- ASTM C483-95 Standard Test Method for Electrical Resistance of Conductive Ceramic Tile
- ASTM D2898-10(2017) Standard Practice for Accelerated Weathering of Fire-Retardant-Treated Wood for Fire Testing
- ASTM B826-09 Standard Test Method for Monitoring Atmospheric Corrosion Tests by Electrical Resistance Probes
- ASTM F1971-05 Standard Test Method for Electrical Resistance of Tires Under Load On the Test Bench
- ASTM D3201-94(1998)e1 Standard Test Method for Hygroscopic Properties of Fire-Retardant Wood and Wood-Base Products
- ASTM D3201/D3201M-20 Standard Test Method for Hygroscopic Properties of Fire-Retardant Wood and Wood-Based Products
- ASTM D3201/D3201M-13 Standard Test Method for Hygroscopic Properties of Fire-Retardant Wood and Wood-Based Products
- ASTM D3201-08 Standard Test Method for Hygroscopic Properties of Fire-Retardant Wood and Wood-Based Products
- ASTM D3201-08a Standard Test Method for Hygroscopic Properties of Fire-Retardant Wood and Wood-Based Products
- ASTM E644-98 Standard Test Methods for Testing Industrial Resistance Thermometers
- ASTM E644-08 Standard Test Methods for Testing Industrial Resistance Thermometers
- ASTM E644-02 Standard Test Methods for Testing Industrial Resistance Thermometers
- ASTM B995-15a Standard Test Method for Chloride Resistance Test for Chromium Electroplated Parts (Russian Mud Test)
- ASTM B84-07 Standard Test Method for Temperature-Resistance Constants of Alloy Wires for Precision Resistors
- ASTM B84-07(2013) Standard Test Method for Temperature-Resistance Constants of Alloy Wires for Precision Resistors
- ASTM F1971-99 Standard Test Method for Electrical Resistance of Tires Under Load On the Test Bench
- ASTM F1971-12 Standard Test Method for Electrical Resistance of Tires Under Load On the Test Bench
- ASTM F1971-12(2018) Standard Test Method for Electrical Resistance of Tires Under Load On the Test Bench
- ASTM D2068-04 Standard Test Method for Filter Plugging Tendency of Distillate Fuel Oils
- ASTM D2898-94(2004) Standard Test Methods for Accelerated Weathering of Fire-Retardant-Treated Wood for Fire Testing
- ASTM D2898-94(1999) Standard Test Methods for Accelerated Weathering of Fire-Retardant-Treated Wood for Fire Testing
- ASTM D2898-08 Standard Practice for Accelerated Weathering of Fire-Retardant-Treated Wood for Fire Testing
- ASTM D2898-08e1 Standard Practice for Accelerated Weathering of Fire-Retardant-Treated Wood for Fire Testing
- ASTM D2898-09 Standard Practice for Accelerated Weathering of Fire-Retardant-Treated Wood for Fire Testing
- ASTM D2898-77 Standard Methods for Accelerated Weathering Of Fire-Retardant-Treated Wood For Fire Testing
- ASTM B193-02(2008) Standard Test Method for Resistivity of Electrical Conductor Materials
- ASTM B193-02(2014) Standard Test Method for Resistivity of Electrical Conductor Materials
- ASTM B193-16 Standard Test Method for Resistivity of Electrical Conductor Materials
- ASTM B63-07 Standard Test Method for Resistivity of Metallically Conducting Resistance and Contact Materials
- ASTM B63-07(2013) Standard Test Method for Resistivity of Metallically Conducting Resistance and Contact Materials
- ASTM F1680-02 Standard Test Method for Determining Circuit Resistance of a Membrane Switch
- ASTM B794-97(2003) Standard Test Method for Durability Wear Testing of Separable Electrical Connector Systems Using Electrical Resistance Measurements
- ASTM B794-97 Standard Test Method for Durability Wear Testing of Separable Electrical Connector Systems Using Electrical Resistance Measurements
European Committee for Standardization (CEN), Wire Flame Retardancy Test
- EN ISO 8205-3:2012 Water-cooled secondary connection cables for resistance welding - Part 3: Test requirements
- prEN 20340-1992 Conveyor belts; flame retardation; specifications and test method (ISO 340:1988)
- EN ISO 17654:2003 Destructive tests on welds in metallic materials Resistance welding Pressure test on resistance seam welds ISO 17654:2003
- HD 438 S1-1984 Method of test for electrical resistance and resistivity of insulating materials at elevated temperatures
- EN ISO 340:2022 Conveyor belts - Laboratory scale flammability characteristics - Requirements and test method (ISO 340:2022)
- EN ISO 340:2013 Conveyor belts - Laboratory scale flammability characteristics - Requirements and test method
- EN 2591-318:1998 Aerospace series - Elements of electrical and optical connection - Test methods - Part 318: Fire-resistance
- EN 2591-318:2018 Aerospace series - Elements of electrical and optical connection - Test methods - Part 318: Fire-resistance
- EN ISO 17654:2011 Resistance welding - Destructive tests of welds - Pressure test of resistance seam welds (ISO 17654:2011)
RU-GOST R, Wire Flame Retardancy Test
JP-JCS, Wire Flame Retardancy Test
- JCS 9076-2011 Flame retardant polyethylene sheathed button telephone cables for indoor use
- JCS 5503-2010 Flame retardant polyolefin shesathed twisted pair cables for Local Area Networks
International Electrotechnical Commission (IEC), Wire Flame Retardancy Test
- IEC 60197:1965 High-voltage connecting wire with flame retarding insulation for use in television receivers
- IEC 61196-1-101:2005 Coaxial communication cables - Part 1-101: Electrical test methods - Test for conductor d.c. resistance of cable
- IEC 60512-21-1:2010 Connectors for electronic equipment - Tests and measurements - Part 21-1: RF resistance tests - Test 21a: RF shunt resistance
- IEC 60512-2-2:2003 Connectors for electronic equipment - Tests and measurements - Part 2-2: Electrical continuity and contact resistance tests; Test 2b: Contact resistance; Specified test current method
- IEC 60512-2-3:2002 Connectors for electronic equipment - Tests and measurements - Part 2-3: Electrical continuity and contact resistance tests; Test 2c: Contact resistance variation
- IEC 60345:1971 Method of test for electrical resistance and resistivity of insulating materials at elevated temperatures
- IEC 60512-2-1:2002 Connectors for electronic equipment - Tests and measurements - Part 2-1: Electrical continuity and contact resistance tests; Test 2a: Contact resistance - Millivolt level method
- IEC 60093:1980 Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials
- IEC 61482-1:2002 Live working - Flame-resistant materials for clothing for thermal protection of workers; Thermal hazards of an electric arc - Part 1: Test methods
GM North America, Wire Flame Retardancy Test
未注明发布机构, Wire Flame Retardancy Test
- BS EN 2310:1991(1999) Test methods for the flame resistance rating ofnon - metallic materials
- BS EN ISO 14272:2016(2017) Resistance welding — Destructive testing of welds — Specimen dimensions and procedure for cross tension testing of resistance spot and embossed projection welds
- BS ISO 2678:1985(2022) Environmental tests for aircraft equipment — Insulation resistance and high voltage tests for electrical equipment
国家林业和草原局, Wire Flame Retardancy Test
- LY/T 3036-2018 Test method for hygroscopicity of flame retardant wood materials
Lithuanian Standards Office , Wire Flame Retardancy Test
- LST EN ISO 17654:2011 Resistance welding - Destructive tests of welds - Pressure test of resistance seam welds (ISO 17654:2011)
- LST EN 13087-7-2000 Protective helmets - Test methods - Part 7: Flame resistance
- LST EN 13087-7-2000/A1-2002 Protective helmets - Test methods - Part 7: Flame resistance
- LST EN ISO 17653:2012 Resistance welding - Destructive tests on welds in metallic materials - Torsion test of resistance spot welds (ISO 17653:2012)
- LST EN 2310-2001 Aerospace series - Test methods for the flame resistance rating of non-metallic materials
- LST EN ISO 10447:2015 Resistance welding - Testing of welds - Peel and chisel testing of resistance spot and projection welds (ISO 10447:2015)
AENOR, Wire Flame Retardancy Test
- UNE-EN ISO 17654:2012 Resistance welding - Destructive tests of welds - Pressure test of resistance seam welds (ISO 17654:2011)
- UNE-EN 13087-7/A1:2002 Protective helmets - Test methods - Part 7: Flame resistance.
- UNE-EN 60512-2-2:2004 Connectors for electronic equipment - Tests and measurements -- Part 2-2: Electrical continuity and contact resistance tests - Test 2b: Contact resistance - Specified test current method
- UNE-EN ISO 17653:2012 Resistance welding - Destructive tests on welds in metallic materials - Torsion test of resistance spot welds (ISO 17653:2012)
SAE - SAE International, Wire Flame Retardancy Test
- SAE J1495-2018 Test Procedure for Battery Flame Retardant Venting Systems
- SAE J1495-2012 Test Procedure for Battery Flame Retardant Venting Systems
Institute of Interconnecting and Packaging Electronic Circuits (IPC), Wire Flame Retardancy Test
(U.S.) Ford Automotive Standards, Wire Flame Retardancy Test
Professional Standard - Textile, Wire Flame Retardancy Test
- FZ/T 50021-2014 Phosphorus flame-retardant chemical fiber products.Determination of the phosphorus content
- FZ/T 50017-2011 Testing method for flame retardant property of polyester fibers. Oxygen index
- FZ/T 50016-2011 Testing method for flame retardant property of viscose staple fibers. Oxygen index
- FZ/T 50035-2016 Synthetic filament yarns.Test method for electric resistance
- FZ/T 50029-2015 Test method for flame retardant property of synthetic fiber grade chips.Oxygen index method
Professional Standard - Light Industry, Wire Flame Retardancy Test
- QB/T 2973-2008 Fur.Physical and mechanical tests.Determination of resistance to flame
Association of German Mechanical Engineers, Wire Flame Retardancy Test
NZ-SNZ, Wire Flame Retardancy Test
- AS/NZS 1660.5.2:2006 Test methods for electric cables, cords and conductors Method 5.2: Fire testsMeasurement of smoke density of cables burning under defined conditions
- AS/NZS 1660.5.1:2005 Test methods for electric cables, cords and conductors Method 5.1: Fire testsTest for vertical flame spread of vertically-mounted bunched wires or cables
CN-STDBOOK, Wire Flame Retardancy Test
- 图书 3-9033 Compilation of Wire and Cable Standards 2018 Electric and Optical Cable Burning Test Methods Volume
CEN - European Committee for Standardization, Wire Flame Retardancy Test
- EN ISO 340:2004 Conveyor belts - Laboratory scale flammability characteristics - Requirements and test method
American National Standards Institute （ANSI), Wire Flame Retardancy Test
ZA-SANS, Wire Flame Retardancy Test
- SANS 1411-5:2009 Materials of insulated electric cables and flexible cords Part 5: Halogen-free, flame-retardant materials
- SANS 1411-5:2003 Materials of insulated electric cables and flexible cords Part 5: Halogen-free, flame-retardant materials
European Committee for Electrotechnical Standardization（CENELEC）, Wire Flame Retardancy Test
- HD 438 S1-1989 Method of Test for Electrical Resistance and Resistivity of Insulating Materials at Elevated Temperatures
- EN 60512-2-2:2003 Connectors for electronic equipment - Tests and measurements Part 2-2: Electrical continuity and contact resistance tests - Test 2b: Contact resistance - Specified test current method
- EN 60512-2-3:2002 Connectors for Electronic Equipment - Tests and Measurements Part 2-3: Electrical Continuity and Contact Resistance Tests - Test 2c: Contact Resistance Variation
- EN 60512-2-1:2002 Connectors for Electronic Equipment Tests and Measurements Part 2-1: Electrical Continuity and Contact Resistance Tests Test 2a: Contact Resistance Millivolt Level Method
RO-ASRO, Wire Flame Retardancy Test
- STAS 9904/3-1975 ELEGTRIGAL ROTATING MACHINES Test methods Resistance test of windings
HU-MSZT, Wire Flame Retardancy Test
European Association of Aerospace Industries, Wire Flame Retardancy Test
- AECMA PREN 2310-1988 Aerospace Series Test Methods for the Flame Resistance Rating of Non-Metallic Materials Edition 1
AR-IRAM, Wire Flame Retardancy Test
IT-UNI, Wire Flame Retardancy Test
Professional Standard - Agriculture, Wire Flame Retardancy Test
- GB 1410-1978 Test methods for insulation resistance, volume resistivity and surface resistivity of solid electrical insulating materials
Standard Association of Australia （SAA）, Wire Flame Retardancy Test
- AS 4352:2005 Tests for coating resistance to cathodic disbonding
- AS 1334.12:1996 Methods of testing conveyor and elevator belting - Determination of combustion propagation characteristics of conveyor belting
海关总署, Wire Flame Retardancy Test
Malaysia Standards, Wire Flame Retardancy Test
- MS 1465 Pt.1-1999 Method of test for determination of plastics resistivity: Part 1: surface resistivity
- MS 1465 Pt.2-1999 Method of test for determination of plastics resistivity: Part 2: volume resistivity
BELST, Wire Flame Retardancy Test
- STB 2502-2017 Oil supply pipes. Methods for testing pipeline steel crack growth resistance
SE-SIS, Wire Flame Retardancy Test
- SIS SS IEC 172:1989 winaing wires — Test procedure for the determination ofthe temperature index of enamelled winding wires
Professional Standard - Geology, Wire Flame Retardancy Test
- DZ/T 0276.16-2015 Regulation for testing the physical and mechanical properties of rock.Part 16:Test for determining the volume resistivity and surface resistivity of rock
CENELEC - European Committee for Electrotechnical Standardization, Wire Flame Retardancy Test
- CLC/TS 61482-1-2003 Live working Flame-resistant materials for clothing for thermal protection of workers Thermal hazards of an electric arc Part 1: Test methods
UNKNOWN, Wire Flame Retardancy Test
Professional Standard - Ferrous Metallurgy, Wire Flame Retardancy Test
- YB 952-1982 Rapid Life Test Method for High Resistance Electric Heating Alloy
TR-TSE, Wire Flame Retardancy Test
Professional Standard - Electricity, Wire Flame Retardancy Test
- DL/T 1287-2013 Determination of electrical resistivity of coal ash in laboratory
Canadian Standards Association (CSA), Wire Flame Retardancy Test
- CSA TIL J-13-1989 Wire & Cable and Associated Devices; Wire and Cable and Flexible Cords Products; Flame Test Classification Requirements