ZH
RU
ES
Flame retardant test conditions
Flame retardant test conditions, Total:499 items.
In the international standard classification, Flame retardant test conditions involves: Protection against fire, Wood, sawlogs and sawn timber, Construction materials, Protective equipment, Railway rolling stock, Electrical wires and cables, Products of the textile industry, Rubber and plastics products, Footwear, Paper and board, Internal combustion engines, Fuels, Nuclear energy engineering, Continuous handling equipment, Electromechanical components for electronic and telecommunications equipment, Heat pumps, Reinforced plastics, Terminology (principles and coordination), Materials for aerospace construction, Paints and varnishes, Analytical chemistry, Galvanic cells and batteries, Internal combustion engines for road vehicles, Installations in buildings, Textile fibres, Flexible drives and transmissions, Linear and angular measurements, Elements of buildings, Air quality, Motor cycles and mopeds, Aerospace electric equipment and systems, Leather technology, Products of non-ferrous metals, Insulating materials, Power stations in general, Testing of metals, Aircraft and space vehicles in general, Electrical engineering in general, Machine tools, Products of the chemical industry, Valves, Electrical accessories, Wood-based panels, TESTING, Thermodynamics and temperature measurements, Mechanical testing, Test conditions and procedures in general, Freight distribution of goods, Materials for the reinforcement of composites, Iron and steel products, Clothes, Vibrations, shock and vibration measurements, Transformers. Reactors, Petroleum products in general, Welding, brazing and soldering, Industrial furnaces, Machine tool systems, Industrial automation systems, Cycles, Plastics, Components and accessories for telecommunications equipment, Piezoelectric and dielectric devices, Environmental testing, Burners. Boilers, Character sets and information coding, Software development and system documentation, Structures of buildings, Sewing machines and other equipment for the clothing industry, Equipment for the chemical industry, Equipment for the rubber and plastics industries, Pulps, Adhesives, Telecontrol. Telemetering, Non-destructive testing, Electricity. Magnetism. Electrical and magnetic measurements, Magnetic materials, Farming and forestry, Components for electrical equipment, Pipeline components and pipelines, Aerospace engines and propulsion systems, Domestic, commercial and industrial heating appliances, Quality, Power transmission and distribution networks, Mobile services, Astronomy. Geodesy. Geography.
Korean Agency for Technology and Standards (KATS), Flame retardant test conditions
- KS C IEC 60332-3-21-2003(2018)
- KS F 2298-2016(2021) Flame retardant testing method for vertical protection mesh
- KS F 2298-1985 Flame retardant testing method for vertical protection mesh
- KS C 3619-1994(2009) Flame test method for flame retardant sheath of telecommunication cables
- KS K 0583-2016 Test method for flame resistance of cloth：Horizontal method
- KS M 6678-2008(2018) Flame resistant conveyor belts－Classification and test method
- KS K 0583-2016(2021) Test method for flame resistance of cloth：Horizontal method
- KS M 6678-2006 Flame resistant conveyor belts－Classification and test method
- KS K 0583-2022 Test method for flame resistance of cloth: Horizontal method
- KS M 6678-1974 Flame resistant conveyor belts－Classification and test method
- KS K 0583-1985 Test method for flame resistance of cloth: Horizontal method
- KS C 3619-1994 Flame test method for flame retardant sheath of telecommunication cables
- KS R 0099-2003 ROAD VEHICLES - FUEL INJECTION PUMP TESTING - PART 1;DYNAMIC CONDITIONS
- KS R 0099-1993 ROAD VEHICLES - FUEL INJECTION PUMP TESTING - PART 1;DYNAMIC CONDITIONS
- KS M 6678-2008 Flame resistant conveyor belts－Classification and test method
- KS R 0100-1994 Road vehicles-Fuel injection pump testing.Part 2:Static conditions
- KS R ISO 4008-2-2007(2022) Road vehicles－Fuel injection pump testing－Part 2：Static conditions
- KS R ISO 4008-1-2007(2022) Road vehicles－Fuel injection pump testing－Part 1：Dynamic conditions
- KS M ISO 340:2008 Conveyor belts－Laboratory scale flammability characteristics－Requirements and test method
- KS M 7074-2021 Testing method for flame resistance of treated paper and paperboard
- KS M 7074-2002 Testing method for flame resistance of treated paper and paperboard
- KS C IEC 61034-1:2008 Measurement of smoke density of cables burning under defined conditions－Part 1：Test apparatus
- KS D ISO TR 15461-2005(2020) Steel forgings－Testing frequency, sampling conditions and test methods for mechanical tests
- KS B 4042-2002 Acceptance conditions for gear hobbing machines－Testing of the accuracy
- KS B 4042-1981 Acceptance conditions for gear hobbing machines－Testing of the accuracy
- KS D ISO TR 15461:2005 Steel forgings－Testing frequency, sampling conditions and test methods for mechanical tests
- KS B ISO 5186:2005 Oxygen/fuel gas blowpipes(cutting machine type) with cylindrical barrels－General specifications and test methods
- KS B ISO 5186:2010 Oxygen/fuel gas blowpipes(cutting machine type) with cylindrical barrels－General specifications and test methods
- KS B ISO 14137:2021 Test conditions for wire electrical-discharge machines(wire EDM) — Testing of the accuracy
- KS B ISO 14137:2016 Machine tools — Test conditions for wire electrical-discharge machines(wire EDM) — Terminology and testing of the accuracy
- KS C IEC 61034-2:2003 Measurement of smoke density of cables burning under defined conditions-Part 2:Test procedure and requirements
- KS C IEC 61034-2:2013 Measurement of smoke density of cables burning under defined conditions－Part 2：Test procedure and requirements
- KS B ISO 2772-2-2007(2012) Test conditions for box type vertical drilling machines－Testing of the accuracy－Part 2：Practical test
American Society for Testing and Materials (ASTM), Flame retardant test conditions
- ASTM D5664-10 Standard Test Method for Evaluating the Effects of Fire-Retardant Treatments and Elevated Temperatures on Strength Properties of Fire-Retardant Treated Lumber
- ASTM D6413/D6413M-22 Standard Test Method for Flame Resistance of Textiles (Vertical Test)
- ASTM D1360-98(2004) Standard Test Method for Fire Retardancy of Paints (Cabinet Method)
- ASTM D1360-98 Standard Test Method for Fire Retardancy of Paints (Cabinet Method)
- ASTM D1360-98(2011) Standard Test Method for Fire Retardancy of Paints (Cabinet Method)
- ASTM A718-75(1991) Test Method for Surface Insulation Resistivity of Multi-Strip Specimens
- ASTM D5664-99 Standard Test Method for Evaluating the Effects of Fire-Retardant Treatments and Elevated Temperatures on Strength Properties of Fire-Retardant Treated Lumber
- ASTM D5664-01a Standard Test Method for Evaluating the Effects of Fire-Retardant Treatments and Elevated Temperatures on Strength Properties of Fire-Retardant Treated Lumber
- ASTM D5664-02 Standard Test Method for Evaluating the Effects of Fire-Retardant Treatments and Elevated Temperatures on Strength Properties of Fire-Retardant Treated Lumber
- ASTM D5664-08 Standard Test Method for Evaluating the Effects of Fire-Retardant Treatments and Elevated Temperatures on Strength Properties of Fire-Retardant Treated Lumber
- ASTM A717/A717M-95 Standard Test Method for Surface Insulation Resistivity of Single-Strip Specimens
- ASTM A717/A717M-01 Standard Test Method for Surface Insulation Resistivity of Single-Strip Specimens
- ASTM A717/A717M-06 Standard Test Method for Surface Insulation Resistivity of Single-Strip Specimens
- ASTM A717/A717M-12(2018) Standard Test Method for Surface Insulation Resistivity of Single-Strip Specimens
- ASTM A717/A717M-12(2022) Standard Test Method for Surface Insulation Resistivity of Single-Strip Specimens
- ASTM E2472-12(2018)e2 Standard Test Method for Determination of Resistance to Stable Crack Extension under Low-Constraint Conditions
- ASTM D2898-10(2017) Standard Practice for Accelerated Weathering of Fire-Retardant-Treated Wood for Fire Testing
- ASTM D3201-94(1998)e1 Standard Test Method for Hygroscopic Properties of Fire-Retardant Wood and Wood-Base Products
- ASTM D3201/D3201M-20 Standard Test Method for Hygroscopic Properties of Fire-Retardant Wood and Wood-Based Products
- ASTM D3201/D3201M-13 Standard Test Method for Hygroscopic Properties of Fire-Retardant Wood and Wood-Based Products
- ASTM D3201-08 Standard Test Method for Hygroscopic Properties of Fire-Retardant Wood and Wood-Based Products
- ASTM D3201-08a Standard Test Method for Hygroscopic Properties of Fire-Retardant Wood and Wood-Based Products
- ASTM F1958/F1958M-99(2010) Standard Test Method for Determining the Ignitability of Non-flame-Resistant Materials for Clothing by Electric Arc Exposure Method Using Mannequins
- ASTM E2010-99 Standard Test Method for Positive Pressure Fire Tests of Window Assemblies
- ASTM D5304-02 Standard Test Method for Assessing Distillate Fuel Storage Stability by Oxygen Overpressure
- ASTM D5304-02a Standard Test Method for Assessing Distillate Fuel Storage Stability by Oxygen Overpressure
- ASTM D2612-99(2005) Standard Test Method for Fiber Cohesion in Sliver and Top in Static Tests
- ASTM D2068-04 Standard Test Method for Filter Plugging Tendency of Distillate Fuel Oils
- ASTM D2898-94(2004) Standard Test Methods for Accelerated Weathering of Fire-Retardant-Treated Wood for Fire Testing
- ASTM D2898-94(1999) Standard Test Methods for Accelerated Weathering of Fire-Retardant-Treated Wood for Fire Testing
- ASTM D2898-08 Standard Practice for Accelerated Weathering of Fire-Retardant-Treated Wood for Fire Testing
- ASTM D2898-08e1 Standard Practice for Accelerated Weathering of Fire-Retardant-Treated Wood for Fire Testing
- ASTM D2898-09 Standard Practice for Accelerated Weathering of Fire-Retardant-Treated Wood for Fire Testing
- ASTM D2898-77 Standard Methods for Accelerated Weathering Of Fire-Retardant-Treated Wood For Fire Testing
- ASTM D635-10 Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position
- ASTM B995-15a Standard Test Method for Chloride Resistance Test for Chromium Electroplated Parts (Russian Mud Test)
- ASTM D5304-03 Standard Test Method for Assessing Middle Distillate Fuel Storage Stability by Oxygen Overpressure
- ASTM E3082-17 Standard Test Methods for Determining the Effectiveness of Fire Retardant Treatments for Natural Christmas Trees
- ASTM B794-97(2003) Standard Test Method for Durability Wear Testing of Separable Electrical Connector Systems Using Electrical Resistance Measurements
- ASTM B794-97 Standard Test Method for Durability Wear Testing of Separable Electrical Connector Systems Using Electrical Resistance Measurements
- ASTM D5304-05 Standard Test Method for Assessing Middle Distillate Fuel Storage Stability by Oxygen Overpressure
- ASTM D5304-11 Standard Test Method for Assessing Middle Distillate Fuel Storage Stability by Oxygen Overpressure
- ASTM D3806-98 Standard Test Method of Small-Scale Evaluation of Fire-Retardant Paints (2-Foot Tunnel Method)
- ASTM D3806-98(2004) Standard Test Method of Small-Scale Evaluation of Fire-Retardant Paints (2-Foot Tunnel Method)
- ASTM D3806-98(2011) Standard Test Method of Small-Scale Evaluation of Fire-Retardant Paints (2-Foot Tunnel Method)
- ASTM E2912-17 Standard Test Method for Fire Test of Non-Mechanical Fire Dampers Used in Vented Construction
- ASTM F3210M-22 Standard Test Method for Fatigue Testing of Total Knee Femoral Components Under Closing Conditions
- ASTM F3210-22e1 Standard Test Method for Fatigue Testing of Total Knee Femoral Components Under Closing Conditions
Professional Standard - Public Safety Standards, Flame retardant test conditions
- GA 91-1995 General technical conditions for flame retardant tarpaulin
- GA 179-1998 Technical specifications for burning properties of fire-retardant glass fiber reinforced plastics
- GA 159-1997 General specifications for water-based fire retardants
- GA/T 42.1-1992 Test method for combustion performance of fire retardant wood wood stack method
- GA/T 42.2-1992 Test method for combustion performance of flame retardant wood by fire tube method
- GA 305-2001 General specifications for plain conduits of flame-retardant PVC plastics for electrical installations
- GA 495-2004 Specification of flame-retardant floor-covering
- GA/T 537-2005 Flame-retardant、fire-proof、fire resistance specifications of testing method of busbar trunking system (busways)
应急管理部, Flame retardant test conditions
- XF 91-1995 General technical conditions for flame retardant tarpaulins
- XF 305-2001 General technical conditions for flame-retardant PVC plastic flat conduits for electrical installations
- XF 495-2004 Performance requirements and test methods for flame retardant floor covering materials
- XF/T 537-2005 Test methods for flame retardant, fireproof and fire-resistant properties of busbar trunk systems (busbar ducts)
Professional Standard - Machinery, Flame retardant test conditions
- JB/T 9386-1999 Specifications for the pendulum damping testers
- JB/T 10629-2006 Gas engines General requirements and test methods
- JB/T 11036-2010 Single cylinder gas engines-General requirements and test methods
- JB/T 11793-2014 Diesel/biogas dual fuel engine.General technology and test methods
- JB/T 12331-2015 Reciprocating internal combustion engines.Timing belt drive systems.General requirements and test methods
- JB/T 9391-2001 Specifications for bump testing machines
- JB/T 9370-1999 Specifications for the torsion testing machines
- JB/T 9371-1999 Specifications for the reverse bend testing machines
- JB/T 7408-1994 Cupping testing machine - Technical condition
- JB/T 7408-2013 Cupping testing machines.Specification
- JB/T 9371-2013 Reverse bend testing machines.Specification
- JB/T 7407-2008 Specifications for the packaging case drop testing machines
- JB/T 7407-1994 Specifications for package drop test machine
- JB/T 9734-1999 Technical specifications for fuel injection pump test bench
- JB/T 1612-1994 Technical specification for hydraulic test of boiler
- JB/T 9734-2011 Fuel injection pump test bench.Specifications
- JB/T 9373-2014 Tensile-creep testing machines.Specification
- JB/T 9373-1999 Specifications for the tensile - creep testing machines
- JB/T 9376-1999 Specifications for the wire torsion testing machines
- JB/T 9395-2004 Specification for four-ball friction testing machines
- JB/T 9396-1999 The compensating exfension wires for tungsten - rhenium thermocouples
- JB/T 9397-2002 Specifications for tension-compression fatigue testing machines
- JB/T 11583-2013 High temperature furnace used for testing machines.Technical specification
- JB/T 9397-2013 Tension-compression fatigue testing machines.Technical specification
- JB/T 7796-1995 Technical conditions of spring compression testing machine
- JB/T 9629-1999 Hydrostatic tests for steam turbine pressure parts
- JB/T 9629-2016 Specifications for hydrostatic test of steam turbine pressure parts
- JB/T 9375-2014 Mechanical tensile testing machines.Specification
- JB/T 9374-2015 Pure bending fatigue testing machines.Technical specification
- JB/T 9374-1999 Specifications for the rotary bending fatigue testing machines
- JB/T 9375-1999 Specifications for the mecanical tensile testing machines
Shandong Provincial Standard of the People's Republic of China, Flame retardant test conditions
- DB37/T 1991-2011 Specifications for combustion performance of flame retardant blockboard
- DB37/T 1990-2011 Specifications for combustion performance of flame retardant and waterproof membranes
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Flame retardant test conditions
- GB/T 23467-2009 Standard test method for evaluation of flame resistant clothing protection against flash fire simulations using an instrumented mainikin
- GB/T 17658-1999 Test of burning behaviour for flame retardant treated wood--Method of test for fire propagation
- GB/T 14656-1993 Test method for burning behaviour of flame-retardant paper and board
- GB/T 14656-2009 Test method for burning behavior of flame-retardant paper and board
- GB/T 18380.3-2001 Tests on electric cables under fire conditions Part 3: Test on bunched wires or cables
- GB/T 18380.1-2001 Tests on electric cables under fire conditions Part 1: Test on a single vertical insulated wire or cable
- GB/T 18380.2-2001 Tests on electric cables under fire conditions Part 2: Test on a single amall vertical insulated copper wire or cable
- GB/T 10586-2006 Specifications for damp heat testing chambers
- GB/T 10587-2006 Specifications for salt mist testing chambers
- GB/T 10588-2006 Specifications for mould growth testing chambers
- GB/T 10586-1989 Specification for damp heat test chambers
- GB/T 10587-1989 Specification for salt mist test chambers
- GB/T 10588-1989 Specification for mould growth test chambers
- GB/T 10589-1989 Specification for low temperature test chambers
- GB/T 11158-1989 Specification for high temperature test chambers
- GB/T 11158-2008 Specifications for high temperature test chambers
- GB/T 10589-2008 Specification for low temperature test chambers
- GB/T 10067.413-2015 Basic specifications for electroheat installations.Part 413:Resistance furnaces using in the experiments
- GB/T 3579-2002 Cycle chains--Characteristics and test methods
- GB/T 14212-2003 Motor cycle chains-characteristics and test methods
- GB/T 3579-2006 Cycle chains Characteristics and test methods
- GB/T 14212-2010 Motorcycle chains.Characteristics and test methods
- GB/T 10592-2008 Specifications for low/high temperature test chambers
- GB/T 10592-1989 Specification for low/high temperature test chambers
- GB/T 11159-1989 Specification for low air pressure test chambers
- GB/T 11159-2010 Specifications for low air pressure test chambers
- GB/T 10592-2023 High and low temperature test chamber technical conditions
- GB/T 17669.1-1999 General test conditions for gypsum plasters
- GB/T 18380.13-2008 Burning tests on electric and optical cables under flame conditions - Part 13: Test method for the determination of burning drips/particles by the vertical flame spread test for single insulated wires and cables
- GB/T 18380.11-2008 Tests on electric and optical fibre cables under fire conditions.Part 11: Test for vertical flame propagation for a single insulated wire or cable.Apparatus
- GB/T 18380.21-2008 Tests on electric and optical fibre cables under fire conditions.Part 21:Test for vertical flame propagation for a single small insulated wire or cable.Apparatus
- GB/T 42191-2023 MEMS piezoresistive pressure sensitive device performance test method
- GB/T 27904-2011 Testing method for fire characteristics of furniture and subassemblies exposed to flaming ignition source
- GB/T 37400.1-2019(英文版) Heavy mechanical general technical specification—Part 1:Products inspection and test
- GB/T 17651.1-1998 Measurement of smoke density of cables burning under defined conditions. Part 1: Test apparatus
- GB/T 5080.1-2012 Reliability testing.Part 1:Test conditions and statistical test principles
- GB/T 8993-1998 Environmental conditions and testing procedures for nuclear instrumentation
- GB/T 10591-2006 Specifications for high temperature/low air pressure testing chambers
- GB/T 10590-1989 Specification for low temperature/low air pressure test chambers
- GB/T 10591-1989 Specification for high temperature/low air pressure test chambers
Professional Standard - Railway, Flame retardant test conditions
- TB/T 3138-2006 Technical specification of flame retardant materials for railway locomotive and vehicle
- TB/T 2078-2006 Technical specifications for water. resistance loaded test equipment of diesel electric locomotive
- TB/T 2881-1998 Technical conditions of fuel delivery pump test bench
- TB/T 3237-2010 Flame retardant technical specification of decorating materials for multiple unit train
- TB/T 2380-1993 Water resistance test method for diesel locomotive
- TB/T 2583-1995 Specifications for diesel engine fuel injector test bench for diesel locomotive
- TB/T 2416-1993 Specifications for fuel injection pump test bench for diesel locomotive
- TB/T 2364-1993 Test method for resistance braking performance of diesel locomotives
- TB/T 2367-1993 Test method for starting resistance of electric and diesel locomotives
- TB/T 2790-1997 Specifications for main engine oil pump and water pump test bench for diesel locomotives
- TB/T 2527-1995 Test method for power variation of diesel locomotives with atmospheric conditions
- TB/T 2781-1997 Specifications for diesel engine elastic damping reed couplings for diesel locomotives
- TB/T 2910-1998 Specifications for hydraulic pressure test bench for diesel engine cylinder liner of diesel locomotive
- TB/T 2584-1995 Specifications for high-pressure fuel pipe assemblies for diesel engine fuel injection pump test benches for diesel locomotives
- TB/T 2837-1997 701 type test bench technical conditions
- TB/T 1963-1987 705 type test bench technical conditions
- TB/T 2791-1997 Specifications for test benches for multi-piston air compressors for internal combustion and electric locomotives
- TB/T 2329-2002 Fatigue test method for clips of type I and type II fasteners
- TB/T 2789-1997 Technical conditions of tightness test bench for oil delivery valve assembly
- TB/T 2119-1990 Technical conditions for electrical centralized interlocking test
International Organization for Standardization (ISO), Flame retardant test conditions
- ISO 15025:2000 Protective clothing - Protection against heat and flame - Method of test for limited flame spread
- ISO 9151:1995 Protective clothing against heat and flame - Determination of heat transmission on exposure to flame
- ISO 340:1988 Conveyor belts; flame retardation; specifications and test method
- ISO 340:2022 Conveyor belts — Laboratory scale flammability characteristics — Requirements and test method
- ISO 340:1982 Flame retardation of conveyor belts — Specifications and method of test
- ISO 340:2004 Conveyor belts - Laboratory scale flammability characteristics - Requirements and test method
- ISO 340:2013 Conveyor belts - Laboratory scale flammability characteristics - Requirements and test method
- ISO 6779:2019 Test conditions for vertical internal type broaching machines — Testing of accuracy
- ISO/PRF 6779:2018 Test conditions for vertical internal type broaching machines — Testing of accuracy
- ISO 6779:2023 Test conditions for vertical internal type broaching machines — Testing of accuracy
- ISO 15461:2018 Steel forgings — Testing frequency, sampling conditions and test methods for mechanical tests
- ISO/DIS 6779 Test conditions for vertical internal type broaching machines — Testing of accuracy
- ISO 2772:2019 Test conditions for box type vertical drilling machines — Testing of the accuracy
- ISO 6481:2019 Test conditions for vertical surface type broaching machines — Testing of accuracy
- ISO 18592:2019 Resistance welding — Destructive testing of welds — Method for the fatigue testing of multi-spot-welded specimens
- ISO 2407:1973 Test conditions for internal cylindrical grinding machines with horizontal spindle — Testing of accuracy
- ISO/DIS 2773 Test conditions for pillar type vertical drilling machines — Testing of the accuracy
- ISO 6460-2:2007 Motorcycles - Measurement method for gaseous exhaust emissions and fuel consumption - Part 2: Test cycles and specific test conditions
- ISO 6460-2:2014 Motorcycles - Measurement method for gaseous exhaust emissions and fuel consumption - Part 2: Test cycles and specific test conditions
- ISO 3048:1974 Gypsum plasters; General test conditions
- ISO 6480:2019 Test conditions for horizontal internal type broaching machines — Testing of accuracy
- ISO 6855-2:2012 Mopeds - Measurement method for gaseous exhaust emissions and fuel consumption - Part 2: Test cycles and specific test conditions
- ISO 5734:1978 Test conditions of mechanical dividing heads for machine tools — Testing of the accuracy
- ISO 3059:2001 Non-destructive testing - Penetrant testing and magnetic particle testing - Viewing conditions
NL-NEN, Flame retardant test conditions
- NEN 3254-1969 Fire-retardants for wood. Methods of testing
- NEN 2172-1982 Plastics - Conditioning and testing circumstances
- NEN 11034-1-1993 Insulated electric cables.Measurement of smoke density when burned under defined conditions.Part 1:Test apparatus(IEC 1034-1:1990)
Professional Standard - Coal, Flame retardant test conditions
- MT/T 930-2005 Technique qualification resist burning detonate generatrix in coal mine
- MT 668-1997 Specifications for flame retardant steel cord conveyor belts used in coal mines
- MT/T 386-1995 Test method and determination rules for fire redundancy of flame retardant cables intended to be used in coal mines
- MT 386-1995 Test method and judgment rules for flame retardancy of flame retardant cables used in coal mines
- MT 669-1997 Technical condition of fire-resistant steel-cable conveyor-belt in coal mining
- MT/T 386-2011 Test methods and compliance of flame resistant performance for mining cables
- MT 374-1994 Safety test methods and judgment rules for flame retardant and antistatic V-belts
- MT 756-1997 Test method of flame resistance property of polystyrene foam plastics for water trough for explosion suppression
Canadian General Standards Board （CGSB), Flame retardant test conditions
Indonesia Standards, Flame retardant test conditions
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Flame retardant test conditions
- GB/T 33101-2016 Dipped flame-resistant canvas—Test methods of burning character
- GB/T 33393-2016 Footwear—Test methods for whole shoes—Measurement of thermal and water-vapour resistance under steady-state conditions
- GB/T 35497-2017 Rubber shoes—Test method of flame retardant performance for rubber shoes material
国家市场监督管理总局、中国国家标准化管理委员会, Flame retardant test conditions
- GB/T 17658-2018 Test of burning behavior for flame retardant treated wood—Method of test for fire propagation
- GB/T 18380.13-2022 Tests on electric and optical fibre cables under fire conditions—Part 13:Test for vertical flame propagation for a single insulated wire or cable—Procedure for determination of flaming droplets/particles
- GB/T 18380.11-2022 Tests on electric and optical fibre cables under fire conditions—Part 11:Test for vertical flame propagation for a single insulated wire or cable—Apparatus
- GB/T 17651.1-2021 Measurement of smoke density of cables or optical fiber cables burning under defined conditions—Part 1: Test apparatus
PL-PKN, Flame retardant test conditions
- PN E04160-55-1989 Electric cables Methods of testing Tests for flame retardance
- PN T05129-1988 Electromechanical components for electronic equipment -- Basic testing procedures and measuring methods -- Cable clamping tests, explosion hazard tests, chemical resistance tests, fire hazard tests, R.F. resistance tests, capacitance tests, shielding and
Shanghai Provincial Standard of the People's Republic of China, Flame retardant test conditions
- DB31/ 65-1991 Test method for flame retardant performance of wallpaper
- DB31/ 571-1992 Test method for flame retardant properties of carpets 45° burning method
- DB31/ 570-1992 Test method for flame retardant properties of carpets Vertical combustion method
- DB31/ 572-1992 Test method for flame retardant properties of carpets - Horizontal combustion method
Japanese Industrial Standards Committee (JISC), Flame retardant test conditions
- JIS C 3521:1986 Flame test method for flame retardant sheath of telecommunication cables
- JIS K 6324:1994 Flame resistant conveyor belts -- Classification and test methods
- JIS T 8021:2005 Protective clothing against heat and flame -- Determination of heat transmission on exposure to flame
- JIS S 2071:2008 Standard use conditions, standard acceleration mode and test conditions for domestic gas and oil water heater
- JIS A 1515:1998 Windows and doorsets -- Wind resistance test
- JIS D 3633:1990 Road vehicles -- Fuel injection pump testing -- Part 1: Dynamic conditions
- JIS D 3634:1991 Road vehicles -- Fuel injection pump testing -- Part 2: Static conditions
- JIS T 8022:2006 Protective clothing -- Protection against heat and flame -- Method of test for limited flame spread
- JIS Z 0203:2000 Packaged freights -- Conditioning for testing
- JIS Z 8703:1983 Standard atmospheric conditions for testing
- JIS D 1047-2:2017 Motorcycles -- Measurement method for gaseous exhaust emissions and fuel consumption -- Part 2: Test cycles and specific test conditions
- JIS B 6216:1998 Gear hobbing machines -- Test conditions of the accuracy
- JIS B 6223:1993 Vertical turning and boring lathes -- Test conditions for accuracy
- JIS C 3665-1-1:2007 Tests on electric and optical fibre cables under fire conditions -- Part 1-1: Test for vertical flame propagation for a single insulated wire or cable -- Apparatus
- JIS Z 2323:2005 Non-destructive testing -- Penetrant testing and magnetic particle testing -- Viewing conditions
- JIS Z 2323:2012 Non-destructive testing -- Penetrant testing and magnetic particle testing -- Viewing conditions
- JIS Z 2323:2017 Non-destructive testing -- Penetrant testing and magnetic particle testing -- Viewing conditions
- JIS S 2073:2009 Standard use conditions, standard acceleration mode and test conditions for domestic direct vent type oil burning space heater
- JIS B 6225:1993 Bed type vertical milling machines -- Test conditions for accuracy
- JIS B 6226:1993 Bed type horizontal milling machines -- Test conditions for accuracy
- JIS B 6229:1993 Universal tool grinding machines -- Test conditions for accuracy
KR-KS, Flame retardant test conditions
- KS C IEC 60332-3-21-2003(2023)
- KS B ISO 2407-2012 Test conditions for internal cylindrical grinding machines with horizontal spindle－Testing of the accuracy
- KS B ISO 5186-2005 Oxygen/fuel gas blowpipes(cutting machine type) with cylindrical barrels－General specifications and test methods
- KS K ISO 14460-2012(2022) Protective clothing for automobile racing drivers－Protection against heat and flame－Performance requirements and test methods
- KS B ISO 6480-2010 Conditions of acceptance for horizontal internal broaching machines－Testing of the accuracy
- KS B ISO 14137-2021 Test conditions for wire electrical-discharge machines(wire EDM) — Testing of the accuracy
- KS B ISO 6481-2010 Acceptance conditions for vertical surface type broaching machines－Testing of accuracy
- KS B ISO 2772-1-2012 Test conditions for box type vertical drilling machines－Testing of the accuracy－Part 1：Geometrical tests
RU-GOST R, Flame retardant test conditions
- GOST 18597-1973 Motor fuel. Corrosion testing under water condensation conditions
- GOST IEC 61034-1-2011 Measurement of smoke density of cables burning under defined conditions. Part 1. Test apparatus
- GOST ISO 18573-2015 Conveyor belts. Conditions of testing and conditioning
- GOST R ISO 11092-2012 Textiles. Physiological effects. Measurements of thermal and water-vapour resistance under steady-state conditions (sweating guarded-hotplate test)
- GOST IEC 61034-2-2011 Measurement of smoke density of cables burning under defined conditions. Part 2. Test procedure and requirements
- GOST R 53292-2009 Fire retardant compositions and substances for wood. General requirements. Test methods
- GOST 12026-1976 Laboratory filter paper. Specifications
- GOST ISO 10791-7-2016 Machining centres. Test conditions. Part 7. Accuracy of finished test pieces
煤炭工业部, Flame retardant test conditions
- MT/T 669-1997 Technical conditions for flame retardant wire rope traction conveyor belts used in coal mines
Professional Standard - Nuclear Industry, Flame retardant test conditions
- EJ/T 653-1998 Specification for fuel assembly of high flux engineering test reactor
- EJ/T 1167-2004 PWR fuel assembly metallographic examination for resistance spot weld of guide thimble to grid
- EJ/T 1167-2018 Metallographic Examination of Resistance Spot Welding Between Guide Tube and Grid of PWR Fuel Assembly
German Institute for Standardization, Flame retardant test conditions
- DIN EN 60512-20-2:2001 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 20-2: Test: 20b: Flammability tests; Fireproofness (IEC 60512-20-2:2000); German version EN 60512-20-2:2000
- DIN EN 2310:1991-09 Aerospace series; test methods for the flame resistance rating of non-metallic materials; german version EN 2310:1991
- DIN 3230-5:2014-11 Technical conditions of delivery of valves - Valves for gas installations and gas pipelines - Part 5: Requirements and tests
- DIN 52611-1:1991 Determination of thermal resistance of building elements; laboratory method
- DIN 69051-3:1989 Machine tools; ball screws; acceptance conditions and acceptance tests
- DIN 54456:2006 Testing of structural adhesives - Test of resistance to climatic conditions
- DIN EN 1383:2016-07 Timber structures - Test methods - Pull through resistance of timber fasteners; German version EN 1383:2016
- DIN 41640-54:1988 Measuring methods and testing procedures for electromechanical components; test 23a: transfer impedance
- DIN 8974:1975 Switch test for hermetic refrigeration motor compressors; test conditions
British Standards Institution (BSI), Flame retardant test conditions
- BS EN 16905-3:2017 Gas-fired endothermic engine driven heat pumps. Test conditions
- BS EN 2310:1991 Test methods for the flame resistance rating of non-metallic materials
- BS EN ISO 11092:2014 Textiles. Physiological effects. Measurement of thermal and water-vapour resistance under steady-state conditions (sweating guarded-hotplate test)
- BS ISO 6460-2:2007 Motorcycles - Measurement method for gaseous exhaust emissions and fuel consumption - Test cycles and specific test conditions
- BS ISO 6460-2:2014 Motorcycles. Measurement method for gaseous exhaust emissions and fuel consumption. Test cycles and specific test conditions
- BS EN ISO 340:2013 Conveyor belts. Laboratory scale flammability characteristics. Requirements and test method
- BS EN 31092:1993+A1:2012 Textiles. Determination of physiological properties. Measurement of thermal and water-vapour resistance under steady-state conditions (sweating guarded-hotplate test)
- BS EN 31092+A1:1994 Textiles. Determination of physiological properties. Measurement of thermal and water-vapour resistance under steady-state conditions (sweating guarded-hotplate test)
- BS ISO 15461:2018 Steel forgings. Testing frequency, sampling conditions and test methods for mechanical tests
- BS EN 61034-2:2005+A1:2013 Measurement of smoke density of cables burning under defined conditions. Test procedure and requirements
- BS ISO 6855-2:2012 Mopeds. Measurement method for gaseous exhaust emissions and fuel consumption. Test cycles and specific test conditions
- BS ISO 10295-2:2010 Fire tests for building elements and components. Fire testing of service installations. Linear joint (gap) seals
- BS EN 61034-2:2005 Measurement of smoke density of cables burning under defined conditions - Test procedure and requirements
- BS ISO 10791-7:2020 Test conditions for machining centres - Accuracy of finished test pieces
- BS EN 60068-2-67:1996 Environmental testing - Test methods - Test Cy - Damp heat, steady state, accelerated test primarily intended for components
- BS EN 61034-1:2006 Measurement of smoke density of cables burning under defined conditions. Test apparatus
- BS EN 61034-1:2005 Measurement of smoke density of cables burning under defined conditions - Part 1: Test apparatus
- BS ISO 10791-7:2014 Test conditions for machining centres. Accuracy of finished test pieces
- BS ISO 10791-7:1998 Test conditions for machining centres - Accuracy of a finished test piece
- BS 5438:1989 Methods of test for flammability of textile fabrics when subjected to a small igniting flame applied to the face or bottom edge of vertically oriented specimens
- DD ENV 13066-1998 Bar coding. Test specifications for bar code production software
- BS ISO 2407:1997 Test conditions for internal cylindrical grinding machines with horizontal spindle - Testing of accuracy
- BS ISO 2407:1998 Test conditions for internal cylindrical grinding machines with horizontal spindle. Testing of accuracy
- BS EN 15254-4:2008 Extended application of results from fire resistance tests - Non-loadbearing walls - Part 4: Glazed constructions
- BS ISO 6779:2019 Test conditions for vertical internal type broaching machines. Testing of accuracy
- BS ISO 6480:2019 Test conditions for horizontal internal type broaching machines. Testing of accuracy
Professional Standard - Petroleum, Flame retardant test conditions
Group Standards of the People's Republic of China, Flame retardant test conditions
- T/QGCML 1409-2023 Technical conditions for production of color-matched ultra-thin halogen-free flame-retardant nylon materials
- T/JMBX 0224-2022 Test method for flame retardancy of finished non-metallic parts of electric bicycles
- T/CPCIF 0194-2022 The anti-blooming test of powder flame retardants in thermoplastics
- T/CEEIA 502-2021 Direct methanol fuel cell - Performance test method under specific environmental conditions
- T/CEC 354-2020 General technical requirements for transformer low-voltage short-circuit impedance tester
- T/GDBX 016-2019 Footwear Machines - Peeling Strength Tester - Specification
- T/GDBX 015-2019 Footwear Machines - Abrasion Resistance Tester - Specification
- T/CAMS 156-2023 Specifications for drug stability test chambers
Association Francaise de Normalisation, Flame retardant test conditions
- NF T47-108:1993 Conveyor belts. Flame retardation. Specifications and test method.
- NF T47-108*NF EN ISO 340:2013 Conveyor belts - Laboratory scale flammability characteristics - Requirements and test method
- NF X15-016:1981 ENCLOSURES WITH AUTOMATIC TEMPERATURE AND HUMIDITY CONTROL.
- NF EN 16905-3:2017 Pompes à chaleur à moteur endothermique alimenté au gaz - Partie 3 : conditions d'essai
- NF E60-141*NF ISO 6480:2019 Test conditions for horizontal internal type broaching machines - Testing of accuracy
- NF E60-133*NF ISO 2772:2019 Test conditions for box type vertical drilling machines - Testing of the accuracy
- NF E60-142*NF ISO 6779:2019 Test conditions for vertical internal type broaching machines - Testing of accuracy
- NF E60-143*NF ISO 6481:2019 Test conditions for vertical surface type broaching machines - Testing of accuracy
- NF X15-015:1973 MEASUREMENT OF RELATIVE HUMIDITY BY MEANS OF ELECTROLYTIC HYGROMETERS.
- NF C32-073-1*NF EN 61034-1:2005 Measurement of smoke density of cables burning under defined conditions - Part 1 : test apparatus
- NF C32-073-1:1993 MEASUREMENT OF SMOKE DENSITY OF ELECTRIC CABLES BURNING UNDER DEFINED CONDITIONS. PART 1 : TEST APPARATUS.
- NF C32-073-1/A2*NF EN 61034-1/A2:2020 Measurement of smoke density of cables burning under defined conditions - Part 1 : test apparatus
- NF E60-120:1981 Test conditions and installation conditions for work-holding fixed tables of machine tools.
- NF ISO 16900-6:2021 Appareils de protection respiratoire - Méthodes d'essai et équipement d'essai - Partie 6 : résistance mécanique - Résistance des composants et des connexions
- NF E60-123/A1*NF ISO 2407/A1:2016 Test conditions for internal cylindrical grinding machines with horizontal spindle - Testing of accuracy -Amendment 1
- NF ISO 10791-7:2020 Conditions d'essai pour centres d'usinage - Partie 7 : exactitude des pièces d'essai usinées
- NF C32-073-2:2000 Common test methods for cables under fire conditions - Measurement of smoke density of cables burning under defined conditions - Part 2 : procedure.
- NF C32-073-1:2000 Common test methods for cables under fire conditions - Measurement of smoke density of cables burning under defined conditions - Part 1 : apparatus.
- NF EN ISO 14324:2004 Soudage par résistance - Essais destructifs des soudures - Méthode pour les essais de fatigue sur assemblages soudés par points
- NF C32-073-1/A1*NF EN 61034-1/A1:2014 Measurement of smoke density of cables burning under defined conditions - Part 1 : test apparatus
- NF E60-125*NF ISO 3875:2020 Machine tools - Test conditions for external cylindrical centreless grinding machines - Testing of the accuracy
- NF X15-014:1973 SMALL ENCLOSURES FOR CONDITIONNING AND TESTING USING AQUEOUS SOLUTIONS.
GM North America, Flame retardant test conditions
未注明发布机构, Flame retardant test conditions
- BS EN 2310:1991(1999) Test methods for the flame resistance rating ofnon - metallic materials
- BS 7622-1:1993(1999) Measurement ofsmoke density ofelectric cables burning under defined conditions — Part 1 : Test apparatus —
- BS EN 50268-1:2000 Common test methods for cables under fire conditions - Measurement of smoke density of cables burning under defined conditions - Part 1: Apparatus
- BS 7622-2:1993(1999) Measurement ofsmoke density ofelectric cables burning under defined conditions — Part 2 : Test procedure and requirements
国家林业和草原局, Flame retardant test conditions
- LY/T 3036-2018 Test method for hygroscopicity of flame retardant wood materials
IN-BIS, Flame retardant test conditions
SE-SIS, Flame retardant test conditions
- SIS SS IEC 345:1982 Method of test for electrical resistance and resistivity of insulating materials at elevated temperatures
- SIS SS-EN 2310-1992 Aerospace senes — Test methods for the flame resistance rating of non-metallic materials
- SIS SS 499-1979 Small craft — Fire resistance test for fuel system components
Taiwan Provincial Standard of the People's Republic of China, Flame retardant test conditions
- CNS 13277-1993 Method of Test for Cold Filter Plugging Point of Distillate Fuels
- CNS 3635-1985 Insulation Resistance Testing Method for Electronic Components
- CNS 5851-1980 Requirements for Burst Test of Polypropylene Pipes
Society of Automotive Engineers (SAE), Flame retardant test conditions
- SAE J1495-2005 Test Procedure for Battery Flame Retardant Venting Systems
- SAE J1495-2013 Test Procedure for Battery Flame Retardant Venting Systems
- SAE J3046-1-1994 Reciprocating Internal Combustion Engines Performance Part 1: Standard Reference Conditions, Declarations of Power, Fuel and lubricating Oil Consumptions, and Test Methods
- SAE ARP1401B-2012 Aircraft Fuel System and Component Icing Test
Professional Standard - Textile, Flame retardant test conditions
- FZ/T 50021-2014 Phosphorus flame-retardant chemical fiber products.Determination of the phosphorus content
- FZ/T 50017-2011 Testing method for flame retardant property of polyester fibers. Oxygen index
- FZ/T 50016-2011 Testing method for flame retardant property of viscose staple fibers. Oxygen index
- FZ/T 50029-2015 Test method for flame retardant property of synthetic fiber grade chips.Oxygen index method
European Committee for Standardization (CEN), Flame retardant test conditions
- prEN 20340-1992 Conveyor belts; flame retardation; specifications and test method (ISO 340:1988)
- EN 16905-3:2017 Gas-fired endothermic engine driven heat pumps - Part 3: Test conditions
- EN 2591-318:1998 Aerospace series - Elements of electrical and optical connection - Test methods - Part 318: Fire-resistance
- EN 2591-318:2018 Aerospace series - Elements of electrical and optical connection - Test methods - Part 318: Fire-resistance
- EN ISO 340:2022 Conveyor belts - Laboratory scale flammability characteristics - Requirements and test method (ISO 340:2022)
- EN ISO 340:2013 Conveyor belts - Laboratory scale flammability characteristics - Requirements and test method
- DD ENV 1187-2002 Test methods for external fire exposure to roofs Includes Amendment A1:2005;:2001 [Superseded: SFS CR 1187]
- EN 2310:1991 Aerospace series - Test methods for the flame resistance rating of non-metallic materials
Danish Standards Foundation, Flame retardant test conditions
- DS/EN 13087-7/A1:2002 Protective helmets - Test methods - Part 7: Flame resistance
- DS/EN 13087-7:2000 Protective helmets - Test methods - Part 7: Flame resistance
- DS/ISO 340:1983 Flame retardation of conveyor belts. Specifications and method of test
- DS/EN 61034-1:2006 Measurement of smoke density of cables burning under defined conditions – Part 1: Test apparatus
- DS/EN 20187:1993 Paper, board and pulps. Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples
- DS/EN 61034-2:2006 Measurement of smoke density of cables burning under defined conditions – Part 2: Test procedure and requirements
- DS/ISO 21751:2011 Plastics pipes and fittings - Decohesion test of electrofusion assemblies - Strip-bend test
- DS 1103.1:1976 Test methods for rigid flat sheets. Apparatus and general testing conditions
Lithuanian Standards Office , Flame retardant test conditions
AENOR, Flame retardant test conditions
- UNE-EN 13087-7/A1:2002 Protective helmets - Test methods - Part 7: Flame resistance.
- UNE-EN 61034-1:2005 Measurement of smoke density of cables burning under defined conditions -- Part 1: Test apparatus
- UNE-EN 61034-1:2005/A1:2014 Measurement of smoke density of cables burning under defined conditions - Part 1: Test apparatus
- UNE-EN 61034-2:2005 Measurement of smoke density of cables burning under defined conditions -- Part 2: Test procedure and requirements
Association of German Mechanical Engineers, Flame retardant test conditions
- VDI/VDE 2635 Blatt 1-2015 Experimental structure analysis - Metallic bonded resistance strain gauges - Characteristics and testing conditions
Professional Standard - Light Industry, Flame retardant test conditions
- QB/T 2973-2008 Fur.Physical and mechanical tests.Determination of resistance to flame
AT-ON, Flame retardant test conditions
- ONORM E 3652-1989 Tests on cables and flexible cords; flame retardance-test on bunched cables
- ONORM EN 2310-1991 Aerospace series - Test methods for the flame resistance rating of non-metallic materials
- ONORM F 5130-1980 Rope-ladders; requirements and test conditions
Professional Standard - Electricity, Flame retardant test conditions
- DL/T 845.3-2004 General specifications for measuring resistance equipments Part 3: DC resistance meters
- DL/T 845.4-2004 General specifications for measuring resistance equipments Part 4: loop resistance measurement testor
- DL/T 845.4-2019 General Specifications for Resistance Measuring Devices Part 4: Loop Resistance Testers
- DL/T 845.3-2019 General Specifications for Resistance Measuring Devices Part 3: DC Resistance Testers
- DL/T 845.2-2004 General specifications for measuring resistance equipments Part 2: power frequency earth resistance testers
- DL/T 845.2-2020 General Specifications for Resistance Measuring Devices Part 2: Power Frequency Grounding Resistance Tester
- DL/T 987-2005 General technical conditions of resistive current tester for zinc oxide surge arrester
- DL/T 987-2017 General technical requirements for zinc oxide arrester resistive current tester
- DL/T 1098-2009 Requirements and tests for overhead line spacers
- DL/T 1099-2009 Technical requirements and tests for damper
- DL/T 1099-2021 Anti-vibration hammer technical conditions and test methods
- DL/T 1098-2016 Spacer technical conditions and test methods
- DL/T 1298-2009 Spacer technical conditions and test methods
- DL/T 1299-2009 Anti-vibration hammer technical conditions and test methods
CEN - European Committee for Standardization, Flame retardant test conditions
- EN ISO 340:2004 Conveyor belts - Laboratory scale flammability characteristics - Requirements and test method
ZA-SANS, Flame retardant test conditions
- SANS 5559:2001 Electrical resistance test on copper bar, rod, strip, sheet or tube
- SANS 60331-11:2009 Tests for electric cables under fire conditions - Circuit integrity Part 11: Apparatus - Fire alone at a flame temperature of at least 750 °C
- SANS 61034-2:2006 Measurement of smoke density of cables burning under defined conditions Part 2: Test procedure and requirements
Professional Standard - Aviation, Flame retardant test conditions
- HB 6167.14-2014 Environmental conditions and test procedures for airborne equipment of civil airplane.Part 14: Fire flammability test
- HB 5644-1981 General Technical Specifications for Aircraft Fuel Supply Pumps (Trial)
Professional Standard - Electron, Flame retardant test conditions
- SJ/T 10314-1992 Generic specification of resistivity measuring instrument with four-point probe
- SJ 20115.9-1992 Environmental conditions and test methods for aircraft radar.Transportation test
- SJ 20115.10-1992 Environmental conditions and test methods for aircraft radar.Gun-fire vibration test
- SJ 20115.11-1992 Environmental conditions and test methods for aircraft radar.Fungus test
- SJ 20115.12-1992 Environmental conditions and test methods for aircraft radar.Salt fog test
- SJ 20115.5-1992 Environmental conditions and test methods for aircraft radar.Vibration test
- SJ 20115.6-1992 Environmental conditions and test methods for aircraft radar.Bump test
- SJ 2327-1983 Generic specification for low temperature test chambers
- SJ 2330-1983 Generic specification for humidity test chambers
- SJ/T 10711-1996 Standard test condition for communication equipment used in the mobile services
- SJ 2328-1983 Generic specification for high temperature test chambers
NZ-SNZ, Flame retardant test conditions
- AS/NZS 1660.5.2:2006 Test methods for electric cables, cords and conductors Method 5.2: Fire testsMeasurement of smoke density of cables burning under defined conditions
HU-MSZT, Flame retardant test conditions
Institute of Electrical and Electronics Engineers (IEEE), Flame retardant test conditions
- IEEE 817-1993 Test procedure for flame-retardant coatings applied to insulated cables in cable trays
- IEEE Std C62.33-1982 Test specifications for varistor surge-protective devices
European Association of Aerospace Industries, Flame retardant test conditions
- AECMA PREN 2310-1988 Aerospace Series Test Methods for the Flame Resistance Rating of Non-Metallic Materials Edition 1
Professional Standard - Aerospace, Flame retardant test conditions
- QJ 2295-1992 General Technical Conditions for Manufacturing Acceptance of Gas Generators
- QJ 2306-1992 Test method for surface resistivity of materials under space environmental conditions
International Electrotechnical Commission (IEC), Flame retardant test conditions
- IEC 61034-1:1990 Measurement of smoke density of electric cables burning under defined conditions; part 1: test apparatus
- IEC 61034-1:2005+AMD1:2013+AMD2:2019 CSV Measurement of smoke density of cables burning under defined conditions - Part 1: Test apparatus
- IEC 61034-1:2005/AMD2:2019 Amendment 2 - Measurement of smoke density of cables burning under defined conditions - Part 1: Test apparatus
- IEC 61338-1-2:1998 Waveguide type dielectric resonators - Part 1-2: General information and test conditions - Test conditions
- IEC 60331-11:1999 Tests for electric cables under fire conditions - Circuit integrity - Part 11: Apparatus - Fire alone at a flame temperature of at least 750 °C
- IEC 61034-1:1997 Measurement of smoke density of cables burning under defined conditions - Part 1: Test apparatus
- IEC 61034-1:2005/AMD1:2013 Measurement of smoke density of cables burning under defined conditions - Part 1: Test apparatus
- IEC 61034-1:2005 Measurement of smoke density of cables burning under defined conditions - Part 1: Test apparatus
- IEC 60404-11:1991/AMD2:2012 Magnetic materials - Part 11: Method of test for the determination of surface insulation resistance of magnetic sheet and strip; Amendment 2
- IEC 61034-1:2013 Measurement of smoke density of cables burning under defined
conditions - Part 1: Test apparatus
- IEC 61034-2:2005/AMD2:2019 Measurement of smoke density of cables burning under defined conditions - Part 2: Test procedure and requirements
- IEC 61034-1:2019 Measurement of smoke density of cables burning under defined
conditions - Part 1: Test apparatus
- IEC 61034-2:2005+AMD1:2013+AMD2:2019 CSV Measurement of smoke density of cables burning under defined conditions - Part 2: Test procedure and requirements
- IEC 61034-1:2005+AMD1:2013 CSV Measurement of smoke density of cables burning under defined
conditions - Part 1: Test apparatus
European Committee for Electrotechnical Standardization（CENELEC）, Flame retardant test conditions
- HD 606.1 S1-1992 Measurement of Smoke Density of Electric Cables Burning Under Defined Conditions Part 1: Test Apparatus
- EN 50267-1:1998 Common Test Methods for Cables under Fire Conditions - Tests on Gases Evolved During Combustion of Materials From Cables - Part 1: Apparatus
American National Standards Institute （ANSI), Flame retardant test conditions
IT-UNI, Flame retardant test conditions
Underwriters Laboratories (UL), Flame retardant test conditions
- UL 580-1994 Tests for uplift resistance of roof assemblies
工业和信息化部, Flame retardant test conditions
CENELEC - European Committee for Electrotechnical Standardization, Flame retardant test conditions
- EN 50268-1:1999 Common Test Methods for Cables under Fire Conditions - Measurement of Smoke Density of Cables Burning under Defined Conditions - Part 1: Apparatus
YU-JUS, Flame retardant test conditions
- JUS N.R4.468-1978 Electromechanical components for dectronic equipment. Test methods. Test 17c: Cable clamp, resistance to cable pull (tensUe)
- JUS Z.M8.012-1984 Packaging. Complete, filled transport packages. Conditioning for testing
Military Standard of the People's Republic of China-General Armament Department, Flame retardant test conditions
- GJB 360.33-1987 Test methods for electronic and electrical components Contact resistance testing
- GJB 360.29-1987 Test methods for electronic and electrical components DC resistance test
- GJB 360.28-1987 Test methods for electronic and electrical components Insulation resistance test
- GJB 360.30-1987 Test methods for electronic and electrical components Resistance-temperature characteristics test
- GJB 360.35-1987 Test methods for electronic and electrical components Resistance voltage coefficient test
VN-TCVN, Flame retardant test conditions
- TCVN 6440-2-2009 Motorcycles.Measurement method for gaseous exhaust emissions and fuel consumption.Part 2: Test cycles and specific test conditions
- TCVN 2002-2008 Conditions of acceptance for horizontal internal broaching machines.Testing of the accuracy
BE-NBN, Flame retardant test conditions
- NBN-EN 31092-1994 Textiles - Determination of physiological properties - Measurement of thermal and water-vapour resistance under steady-state conditions (sweating guarded - hotplate test) (ISO 11092:1993)
CZ-CSN, Flame retardant test conditions
RO-ASRO, Flame retardant test conditions
- STAS 13108-1992 Resistance projection welding of uncoated low carbon steel sheet. Manufacturing requirements and inspection conditions
Professional Standard - Energy, Flame retardant test conditions
- DL/T 845.5-2021 General Specifications for Resistance Measuring Devices Part 5: Insulation Resistance Tester for Water Internally Cooled Generators
Anhui Provincial Standard of the People's Republic of China, Flame retardant test conditions
- DB34/T 2986.2-2017 Acrylonitrile-Butadiene-Styrene (ABS) General Specifications for Recycled Modified Materials Part 2: Flame Retardant Type
(U.S.) Ford Automotive Standards, Flame retardant test conditions
Professional Standard - Chemical Industry, Flame retardant test conditions
- HG/T 2067-2011 Technical specifications for rubber fatigue testing machines
- HG/T 2067-1991 Technical conditions of rubber fatigue testing machine
- HG/T 2071-2011 Technical specifications for rubber rebound resilience testing machines
- HG/T 2383-2011 Technical specifications for rubber and plastics 90°flex testing machine
- HG/T 2383-1992 Technical conditions of rubber and plastic 90° flex testing machine
- HG/T 2071-1991 Technical conditions of rubber resilience testing machine
Professional Standard-Ships, Flame retardant test conditions
- CB 1235-1993 Environmental conditions and test methods for torpedoes
ES-UNE, Flame retardant test conditions
- UNE-EN 1383:2016 Timber structures - Test methods - Pull through resistance of timber fasteners
ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Flame retardant test conditions
- PREN 2310-1988 Aerospace Series Test Methods for the Flame Resistance Rating of Non-Metallic Materials (Edition 1)
Hubei Provincial Standard of the People's Republic of China, Flame retardant test conditions
- DB42/T 046-2002 Conditions of participating varieties in production test of vegetable varieties
- DB42/T 035-2002 Conditions of participating varieties in the regional test of vegetable varieties
Professional Standard - Geology, Flame retardant test conditions
- DZ/T 0168-1997 Environmental test conditions and methods of gravimeter
TH-TISI, Flame retardant test conditions
- TIS 1030-2009 Electricity metering equipment (ac): general requirements tests and test conditions